Benzene, toluene, ethylbenzene, xylenes, naphthalene and n-hexane evaporating from a thin oil film was measured for 30 min in a small-scale test system at 2 and 13 °C and the impact of physicochemical properties on airborne benzene with time after bulk oil release was studied. Linear mixed-effects models for airborne benzene in three time periods; first 5, first 15 and last 15 min of sampling, indicated that benzene content in fresh oil, oil group (condensate/light crude oil) and pour point were significant determinants explaining 63–73% of the total variance in the outcome variables. Oils with a high pour point evaporated considerably slower than oils with a low pour point. The mean air concentration of total volatile organic compounds was significatly higher at 13 °C (735 ppm) compared to 2 °C (386 ppm) immediately after release of oil, but at both temperatures the concentration rapidly declined. | acceptedVersion

The increasing salinization of groundwater renders it challenging to maintain the water quality. Moreover, knowledge regarding the characteristics and mechanism of groundwater salinization in mining areas remains limited. This study represents the first attempt of combining the hydrochemical, isotope (δD, δ¹⁸O, δ³⁷Cl, and ⁸⁷Sr/⁸⁶Sr) and multivariate statistical analysis methods to explore the origin, control, and influence of fluoride enrichment in mining cities. The TDS content of groundwater ranged from 275.9 mg/L to 2452.0 mg/L, and 54% of the groundwater samples were classified as class IV water according to China's groundwater quality standards (GB/T 14848–2017), indicating a decline in the water quality of the study area. The results of the groundwater ion ratio and isotope discrimination analysis showed that dissolution and evaporation involving water-rock interactions and halite were the main driving processes for groundwater salinization in the study area. In addition to the hydrogeological and climatic conditions, mine drainage inputs exacerbated the increasing salinity of the groundwater in local areas. The mineral dissolution, cation exchange, and evaporation promoted the F⁻ enrichment, while excessive evaporation and salinity inhibited the F⁻ enrichment. Gangue accumulation and infiltration likely led to considerable F⁻ enrichment in individual groundwater regions. Extensive changes in the groundwater salinity indicated differences in the geochemical processes that controlled the groundwater salinization. Given the particularity of the study area, the enrichment of salinization and fluoride triggered by mining activities cannot be ignored.

Oil spills are a serious environmental problem. To better support risk assessment and pollution control for oil spills, a good understanding of oil transport in the environment is required. This study focused on the numerical simulation of the nearshore oil behaviors based on computational fluid dynamics. Based on the Navier-Stokes momentum equations for an incompressible viscous fluid and volume of fluid (VOF) method, a 3D numerical model of three-phase transient flow was developed. The wave number, averaged flow velocity and oil properties would affect the oil spread extent and the oil volume fraction. The higher the averaged flow velocity and wave number, the lower the oil concentration, and the faster the horizontal movement of the oil. The spilled oil may move to contact the seafloor by increasing the averaged flow velocity at the inlet boundary. Through increasing the wave number, the oil would stay near the water surface. In the nearshore, where the wave is the main seawater motion, the oil containment boom should be set preferentially to the direction of wave transmission for oil cleaning. This study shows that by doubling the wave number and increasing the averaged flow velocity (ten times) at the same time, the maximum oil volume fraction would be reduced by around 32%. Finally, the water temperature had no significant impact on the oil migration, and the impact of evaporation should be considered in the simulation.

Natural background levels (NBLs) and threshold values (TVs) are crucial parameters for identification and the quantification of groundwater pollution, and the evaluation of pollution control measures. The cumulative probability distribution technique was used for the evaluation of NBLs for 36 samples collected during two climate conditions in the part of the desert area from Rajasthan, India. The NBLs for Na⁺, Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and F⁻ ions were assessed and compared with the natural and anthropogenic processes. The TVs were also calculated for Na⁺, Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and F⁻ ions, and compared with the drinking limits of the Bureau of Indian Standards. Additionally, the pollution percentage (%) at the individual well was estimated and identified the polluted zones. Results indicate that most of the polluted areas were situated in the southern part, which was influenced by the natural and anthropogenic factors. The sodium concentrations above the TVs, in indicating the saline nature of water. Chloride threshold value above the drinking water limit was mainly observed in the dry season, related to intensive evaporation and industrial waste, which leads to groundwater quality degradation. The NO₃⁻ concentration (∼56% samples) above the TVs indicates extensive use of nitrate fertilizers and sewage effluent. The values of total dissolved solids (TDS) shows the suspicious scenario as about 84% of the samples in the dry period and about 89% in the wet season exceeding the drinking limit. Assessment of background concentrations and threshold values on regional and local scale assigns the basis for the identification of groundwater pollution, and helpful for better water quality guidelines to protecting of water resources.

Following the 16TAN Husky oil spill along the North Saskatchewan River (NSR), the occurrence and natural attenuation of the petroleum hydrocarbons were assessed by analyzing the littoral zone sediments/oil debris collected from July 2016 to October 2017. Husky oil-free, mixed sediment-Husky oil, and Husky oil debris samples were identified for all the collected samples. Shoreline sediments were contaminated by mixed biogenic, pyrogenic and petrogenic inputs prior to the spill. Oil stranded on the shoreline of NSR was moved or buried due to the very dynamic conditions of the shoreline, or cleaned through a series of cleanup activities after the spill. Most normal alkanes were naturally weathered, whereas most of the branched alkanes and all of the saturated petroleum biomarkers remained. Some lighter molecular weight (e.g., 2 to 3-ring) polycyclic aromatic hydrocarbons (PAHs) were lost rapidly after the spill, whereas sulfur containing components, e.g., dibenzothiophenes and benzonaphthothiiophenes, and those having a heavier molecular weight did not change markedly even 15 months post-spill. Similarly, some light hydrocarbons (e.g., <C₁₀) were lost over the first kilometers from the point of entry (POE), while heavier hydrocarbons did not show any major differences away from the POE. Very large inter-site and inter-survey discrepancies were found for samples. Evaporation into the air and dissolution into water, combined with biodegradation, were together or independently the main contributors to the loss of the light molecular hydrocarbons.

Hydrogeochemistry and isotope hydrology were carried out to investigate the spatial distribution of fluoride (F−) and the mechanisms responsible for its enrichment in the western region of the Ordos basin, northwestern China. Sixty-two groundwater samples from the unconfined aquifer and fifty-six from confined aquifer were collected during the pre-monsoon (June 2016). Over 77% of groundwater samples from the unconfined aquifer (F− concentration up to 13.30 mg/L) and approximately 66% from confined aquifer (with a maximum F− concentration of 3.90 mg/L) exhibit F− concentrations higher than the Chinese safe drinking limit (1.0 mg/L). High-F− groundwater presents a distinctive hydrochemical characteristic: a high pH value and HCO3− concentration with Ca-poor and Na-rich. Mineral dissolution (e.g., feldspar, calcite, dolomite, fluorite), cation exchange and evaporation in the aquifers predominate the formation of groundwater chemistry, which are also important for F− enrichment in groundwater. Mixing with unconfined groundwater is a significant mechanism resulting in the occurrence of high-F− groundwater in confined aquifer. These findings indicate that physicochemical processes play crucial roles in driving F− enrichment and that may be useful for studying F− occurrence in groundwater in arid and semi-arid areas.

Previous studies of solid fuel emissions in household stoves focused more on emission measurements of the overall combustion process instead of the dynamic burning rate and its connection to the emissions. This study put forward a measurement system to monitor the dynamic fuel burning rate and emission rate directly, and explored their relationships during different combustion phases. Experiments were conducted using two types of wood charcoal consumed in a small open pan (i.e. fire basin) used commonly for space heating in rural China. The measured real-time CO emission rate (ERCO), fuel burning rate (BRF), and calculated carbon burning rate (BRC) all rose and then subsided as the combustion progressed. The relationships between ERCO and BRF and between ERCO and BRC were different for the two charcoals during a phase with rising carbon content in the combusted fuel (Phase I), likely because moisture evaporation and volatile matter release were the dominant processes and the reaction was complex during this phase. ERCO and BRF or BRC had linear relationships during a phase with stable carbon content in the combusted fuel (Phase II) for the two charcoals, which may be generalized to other solid fuels, because this phase is associated to fixed carbon dominating phase which usually exist during solid fuel combustion. The study presented a novel measurement approach to the combustion properties of solid fuels. The results implied that a complex relationship between the combustion and pollutant emissions existed in Phase I, and presented the possibility of estimating the fuel burning rate based on emission measurements in Phase II, or vice versa.

The present study aims to investigate the spatial distribution and associated various geochemical mechanisms responsible for fluoride (F⁻) contamination in groundwater of unconfined aquifer system along major rivers in Sindh and Punjab, Pakistan. The concentration of F⁻ in groundwater samples ranged from 0.1 to 3.9 mg/L (mean = 1.0 mg/L) in Sindh and 0.1–10.3 mg/L (mean = 1.0 mg/L) in Punjab, respectively with 28.9% and 26.6% of samples exhibited F⁻ contamination beyond WHO permissible limit value (1.5 mg/L). The geochemical processes regulated F⁻ concentration in unconfined aquifer mainly in Sindh and Punjab were categorized as follows: 1) minerals weathering that observed as the key process to control groundwater chemistry in the study areas, 2) the strong correlation between F⁻ and alkaline pH, which provided favorable environmental conditions to promote F⁻ leaching through desperation or by ion exchange process, 3) the 72.6% of samples from Sindh and Punjab were dominated by Na⁺- Cl⁻ type of water, confirmed that the halite dissolution process was the major contributor for F⁻ enrichment in groundwater, 4) dolomite dissolution was main process frequently observed in Sindh, compared with Punjab, 5) the arid climatic conditions promote evaporation process or dissolution of evaporites or both were contributing to the formation of saline groundwater in the study area, 6) the positive correlation observed between elevated F⁻ and fluorite also suggested that the fluorite dissolution also played significant role for leaching of F⁻ in groundwater from sediments, and 7) calcite controlled Ca2⁺ level and enhanced the dissolution of F-bearing minerals and drive F⁻ concentration in groundwater. In a nut shell, this study revealed the worst scenarios of F⁻ contamination via various possible geochemical mechanisms in groundwater along major rivers in Sindh and Punjab, Pakistan, which need immediate attention of regulatory authorities to avoid future hazardous implications.

This study implements a two-box model coupled with ultrafine particle (UFP) multicomponent microphysics for a compartmentalised street canyon. Canyon compartmentalisation can be described parsimoniously by three parameters relating to the features of the canyon and the atmospheric state outside the canyon, i.e. the heterogeneity coefficient, the vortex-to-vortex exchange velocity, and the box height ratio. The quasi-steady solutions for the two compartments represent a balance among emissions, microphysical aerosol dynamics (i.e. evaporation/condensation of semi-volatiles, SVOCs), and exchange processes, none of which is negligible. This coupled two-box model can capture significant contrasts in UFP number concentrations and a measure of the volatility of the multi-SVOC-particles in the lower and upper canyon. Modelled ground-level UFP number concentrations vary across nucleation, Aitken, and accumulation particle modes as well-defined monotonic functions of canyon compartmentalisation parameters. Compared with the two-box model, a classic one-box model (without canyon compartmentalisation) leads to underestimation of UFP number concentrations by several tens of percent typically. By quantifying the effects of canyon compartmentalisation, this study provides a framework for understanding how canyon geometry and the presence of street trees, street furniture, and architectural features interact with the large-scale atmospheric flow to determine ground-level pollutant concentrations.

In the efforts at controlling automobile emissions, it is important to know in what extent air pollutants from on-road vehicles could be truly reduced. In 2014 we conducted tests in a heavily trafficked tunnel in south China to characterize emissions of volatile organic compounds (VOC) from on-road vehicle fleet and compared our results with those obtained in the same tunnel in 2004. Alkanes, aromatics, and alkenes had average emission factors (EFs) of 338, 63, and 42 mg km⁻¹ in 2014 against that of 194, 129, and 160 mg km⁻¹ in 2004, respectively. In 2014, LPG-related propane, n-butane and i-butane were the top three non-methane hydrocarbons (NMHCs) with EFs of 184 ± 21, 53 ± 6 and 31 ± 3 mg km⁻¹; the gasoline evaporation marker i-pentane had an average EF of 17 ± 3 mg km⁻¹; ethylene and propene were the top two alkenes with average EFs of 16 ± 1 and 9.7 ± 0.9 mg km⁻¹, respectively; isoprene had no direct emission from vehicles; toluene showed the highest EF of 11 ± 2 mg km⁻¹ among the aromatics; and acetylene had an average EF of 7 ± 1 mg km⁻¹. While EFs of total NMHCs decreased only 9% from 493 ± 120 mg km⁻¹ in 2004 to 449 ± 40 mg km⁻¹ in 2014, their total ozone formation potential (OFP) decreased by 57% from 2.50 × 10³ mg km⁻¹ in 2004 to 1.10 × 10³ mg km⁻¹ in 2014, and their total secondary organic aerosol formation potential (SOAFP) decreased by 50% from 50 mg km⁻¹ in 2004 to 25 mg km⁻¹ in 2014. The large drop in ozone and SOA formation potentials could be explained by reduced emissions of reactive alkenes and aromatics, due largely to fuel transition from gasoline/diesel to LPG for taxis/buses and upgraded vehicle emission standards.