As reservoirs for pollutants transported via the Yangtze and Yellow Rivers, the Bohai Sea (BS) and Yellow Sea (YS) play an important role in transporting microplastics (MPs) to the Pacific Ocean. The fate, sources and mass budget of MPs in the BS and the YS were investigated by Pearson correlation, principal component analysis-multilinear regression analysis (PCA-MRLA) and a mass balance model to sedimentary MPs data. Average MP abundances were 137 and 119 items kg⁻¹ in the Bohai and Yellow Seas, respectively. MPs <1000 μm exhibited similar distribution patterns to total organic carbon and fine-grained sediments, while MPs >1000 μm were confined in the BS and exhibited a strong positive correlation with chlorophyll-a and polyethylene terephthalate, suggesting that larger MPs might deposit faster due to biofouling or when comprised of high density polymers. PCA-MLRA analysis indicated land-based inputs (packing materials, textile material and daily commodities) were dominant in the BS, while maritime activities (fishing and mariculture) were the main source of MPs in the YS. The mass balance model revealed that the total MP input and output to the BS and the YS was 3396.92 t yr⁻¹ and 3814.81 t yr⁻¹, respectively. The major input pathway of MPs to the BS and the YS were river discharge and air deposition, respectively. Notably, 94% of MPs in the BS and the YS were deposited to sediments. This study revealed that BS and YS sediments play an important role in preventing MPs from being further transported to the Pacific Ocean, thus more attention should be paid to local ecological risk assessment.

Air pollution constitutes the greatest environmental threat to human health in the European Union. In Poland, the emission of particulate matter and harmful gases originating from local coal based boiler plants and the combustion of fuels in residential heating appliances is a considerable source of air pollution. The combustion of fuel in home furnaces is inefficient due to the use of cheap fuels of low heating parameters and the frequent addition of waste. For the purpose of the research, deciduous tree wood pellets were selected as the basic fuel with the admixture of plastic waste, rubber, waste paper, wood residues, diapers, textile waste, multi-material packaging, construction waste, biomass and alternative fuel (RDF). Examining ash samples to confirm the practices of combusting or co-combusting waste materials in heating appliances is considered to be one of the most reliable detection methods; however, the results of direct research require further data processing. The application of hierarchical clustering analysis to the obtained results arranged into a matrix enabled in a simple way to demonstrate the similarities between the examined samples of fuel and the samples of fuel mixed with waste materials in the parameters space as well as to analyze the similarities among the measured parameters (the content of particular elements in ash) in the space of the examined samples. The application of chemometric methods for the purpose of identifying the combusted fuels, and, in particular the co-combusted waste complements the currently used monitoring tools which control the use of low quality fuels or the combustion of waste of different origin.

Fabric and foam samples from popular children car seats marketed in the United States during 2018 were tested for fluorine content by particle-included gamma ray emission spectroscopy (PIGE, n = 93) and X-ray photoelectron spectroscopy (XPS, n = 36), as well as for per- and polyfluoroalkyl substances (PFAS) by liquid and gas chromatography mass spectrometry (LC/MS and GC/MS, n = 36). PFAS were detected in 97% of the car seat samples analyzed with MS, with total concentrations of 43 PFAS (∑PFAS) up to 268 ng/g. Fabric samples generally had greater ∑PFAS levels than foam and laminated composites of foam and fabric. The three fabric samples with the highest total fluorine content as represented by the highest PIGE signal were also subjected to ultraviolet (UV) irradiation and the total oxidizable precursor (TOP) assay. Results from these treatments, as well as the much higher organofluorine levels measured by PIGE compared to LC/MS and GC/MS, suggested the presence of side-chain fluorotelomer-based polymers (FTPs), which have the potential to readily degrade into perfluoroalkyl acids (PFAAs) under UV light. Furthermore, fluorotelomer (meth)acrylates were found to be indicators for the presence of (meth)acrylate-linked FTPs in consumer products, and thus confirmed that at least half of the tested car seats had FTP-treated fabrics. Finally, extraction of selected samples with synthetic sweat showed that ionic PFAS, particularly those with fluorinated carbons ≤8, can migrate from fabric to sweat, suggesting a potential dermal route of exposure.

Biomass burning, a recurring global phenomenon is also considered an environmental menace, making headlines every year in India with onset of autumn months. Agriculture is demographically the broadest economic sector and plays a significant role in the overall socio-economic fabric of India. Hence, disposal of crop residue is done mainly by burning leading to deterioration of air quality. Residue burning in parts of India is blamed for changing air quality in nearby cities. The spatial distribution of these emissions has always been a challenge due to various data constraints. We hereby present a comprehensive spatially resolved seasonal high resolution gridded (∼10 km × ∼10 km) emission inventory of major pollutants from crop residue burning source in India for the latest year 2018. The winter months contributes almost around ∼50% of total emission followed by summer (∼48%), which is the prime cause of changing air quality in nearby cities. Among all the crops; rice, wheat, maize and sugarcane accounts ∼90% of total PM₁₀ load in the country. The estimated emission for PM₂.₅, PM₁₀, BC and OC, CO, NOx, SO₂, VOC, CH₄ and CO₂ are found to 990.68 Gg/yr, 1231.26 Gg/yr, 123.33 Gg/yr, 410.99 Gg/yr, 11208.18 Gg/yr, 484.55 Gg/yr, 144.66 Gg/yr, 1282.95 Gg/yr, 785.56 Gg/yr and 262051.06 Gg/yr respectively. The cropping pattern and its role in different geographic regions are analysed to identify all potential emission hotspots regions scattered across the country. The developed gridded emissions inventory is envisaged to serve as an important input to regional atmospheric chemistry transport model to better quantify its contribution in deteriorating air quality in various regions of India, paving the way to policy makers to better plan the mitigation and control strategies. The developed fundamental tool is likely to be useful for air quality management.

Decabromodiphenyl ether (DecaBDE) is a brominated flame retardant belonging to the group of polybrominated diphenyl ethers. DecaBDE has been widely used for various applications, such as plastics, textiles, and building and construction materials. Limited information on DecaBDE production and usage inventory has been elaborated, however. Therefore, this work aimed to produce a preliminary emissions inventory of DecaBDE in mainland China by estimating production and consumption amounts of DecaBDE, and characterizing its emission factors during production and usage, based on industrial investigation and theoretical prediction. It was indicated that the total production of DecaBDE reached 464.68 thousand metric tons (kt), of which 62.72 kt were exported, since the beginning of its production. Shandong and Jiangsu provinces dominate the production, with proportions of 77.95% and 18.45%, respectively. The production stage releases most of the DecaBDE to the atmosphere, with an emissions factor of 23 ± 1.9 kg/t, followed by 20 ± 0.9 kg/t DecaBDE to waste water and 16 ± 1.0 kg/t DecaBDE as solid residue. DecaBDE emissions in the consumption stage—namely the plastic production process—are 0.17 ± 0.06–0.23 ± 0.08 kg DecaBDE to the atmosphere and 1.72 ± 0.58–2.29 ± 0.77 kg DecaBDE to solid residue, for each metric ton of plastic produced. The total annual DecaBDE emissions to waste water are 93.98–1140.9 mg—negligible. The results showed that the sources of DecaBDE environmental pollution are its manufacturing and flame-retardant plastic modification plants, which are easily overlooked by both the government and the public. Yet DecaBDE emissions elimination and the environmentally sound management of the DecaBDE waste generated from these two processes are crucial for environmental protection.

Microplastics pollution in the environment is closely determined by the surrounding industrial and human activities. In present study, we investigated microplastics in water and sediment samples collected from a textile industrial area in Shaoxing city, China. The abundance of microplastics varied from 2.1 to 71.0 items/L in surface water samples, and from 16.7 to 1323.3 items/kg (dw) in sediment samples. The polymer type was dominated by polyester both in water (95%) and sediment (79%) samples. The majority of the detected microplastics was predominantly colored fibers smaller than 1 mm in diameter. The high level of microplastic pollution detected in local freshwater and sediment environments was attributed to the production and trading activities of textile industries, for which severe regulations should be envisaged in the future to effectively reduce the local microplastic pollution.

Textile microfibers are one of the most important sources within primary microplastics. These have raised environmental concerns since its recent identification as pollutants. However, there are still no accurate models to assess their contribution to the microplastic pollution. Hence, in this study, a method to estimate the mass flow of microfibers detached from household laundry that reaches aquatic environments has been developed. The method considers a set of parameters related to the detachment of microfibers, which are, basically: (1) the detachment rate of microfibers from different textile garments, (2) the volume of laundry effluents, (3) the percentage of municipal water that has been treated, (4) the type of used-water treatment applied, and, (5) the proportion of front- versus top-loading washing machines. In this way, 0.28 million tons of microfibers per year were estimated to reach aquatic environments, which is approximately half than the last published valuation. Finally, hypothetical situations were simulated to evaluate the reduction of microfibers by the modification of some of the parameters at different levels (consumer, government entities, and industry). Thus, depending on the implanted alternatives, microfibers that reach the aquatic environments could be reduced between 30% and 65%.

Decabromodiphenyl ether (BDE-209) is commonly used as a flame retardant, usually in products that were utilized in electronic equipment, plastics, furniture and textiles. To identify the impacts of BDE-209 on the male reproductive system and the underlying toxicological mechanisms, 40 male ICR mice were randomly divided into four groups, which were then exposed to BDE-209 at 0, 7.5, 25 and 75 mg kg−1 d−1 for four weeks, respectively. With regard to the in vitro study, GC-2spd cells were treated with BDE-209 at 0, 2, 8 and 32 μg mL−1 for 24 h, respectively. The results from the in vivo experiments showed that BDE-209 resulted in damage to the testis structure, led to cell apoptosis in testis and decreased sperm number and motility, while sperm malformation rates were significantly increased. Moreover, BDE-209 could induce oxidative stress with decreased testosterone levels, result in DNA damage and activate DNA damage response signaling pathways (ATM/Chk2, ATR/Chk1 and DNA-PKcs/XRCC4/DNA ligase Ⅳ). The data from the in vitro experiments showed that BDE-209 led to cytotoxicity by reducing cell viability and increasing LDH release as well. BDE-209 also induced DNA strand breaks, cell cycle arrest at G1 phase and elevated reactive oxygen species (ROS) level in GC-2 cells. These results suggested that BDE-209 could lead to male reproductive toxicity by inducing DNA damage and failure of DNA damage repair which resulted in cell cycle arrest and apoptosis of spermatogenic cell. The present study provided new evidence to elucidate the potential mechanism of male reproductive toxicity induced by BDE-209.