The rate of deforestation in Brazil increased by 29% between 2015 and 2016, resulting in an increase of greenhouse gas emissions (GHG) of 9%. Deforestation fires in the Amazonia are the main source of GHG in Brazil. In this work, amounts of CO2, CO, main hydrocarbon gases and PM2.5 emitted during deforestation fires, under real conditions directly in Brazilian Amazonia, were determined. A brief discussion of the relationship between the annual emission of CO2 equivalent (CO2,eq) and Paris Agreement was conducted. Experimental fires were carried out in Western Amazonia (Candeias do Jamari, Rio Branco and Cruzeiro do Sul) and results were compared with a previous fire carried out in Eastern Amazonia (Alta Floresta). The average total fresh biomass on the ground before burning and the total biomass consumption were estimated to be 591 ton ha−1 and 33%, respectively. CO2, CO, CH4, and non–methane hydrocarbon (NMHC) average emission factors, for the four sites, were 1568, 140, 8, and 3 g kg−1 of burned dry biomass, respectively. PM2.5 showed large variation among the sites (0.9–16 g kg−1). Emissions per hectare of forest were estimated as 216,696 kg of CO2, 18,979 kg of CO, 1,058 kg of CH4, and 496 kg of NMHC. The average annual emission of equivalent CO2 was estimated as 301 ± 53 Mt year−1 for the Brazilian Amazonia forest. From 2013, the estimated CO2,eq showed a trend to increase in Amazon region. The present study is an alert and provides important information that can be used in the development of the public policies to control emissions and deforestation in the Brazilian Amazonia.

Cryoconite is a dark, dusty aggregate of mineral particles, organic matter, and microorganisms transported by wind and deposited on glacier surfaces. It can accelerate glacier melting and alter glacier mass balances by reducing the surface albedo of glaciers. Biomass burning in the Tibetan Plateau, especially in the glacier cryoconites, is poorly understood. Retene, levoglucosan, mannosan and galactosan can be generated by the local fires or transported from the biomass burning regions over long distances. In the present study, we analyzed these four molecular markers in cryoconites of seven glaciers from the northern to southern Tibetan Plateau. The highest levels of levoglucosan and retene were found in cryoconites of the Yulong Snow Mountain and Tienshan glaciers with 171.4 ± 159.4 ng g⁻¹ and 47.0 ± 10.5 ng g⁻¹ dry weight (d.w.), respectively. The Muztag glacier in the central Tibetan Plateau contained the lowest levels of levoglucosan and retene with mean values of 59.8 ng g⁻¹ and 0.4 ± 0.1 ng g⁻¹ d.w., respectively. In addition, the vegetation changes and the ratios of levoglucosan to mannosan and retene indicate that combustion of conifers significantly contributes to biomass burning of the cryoconites in the Yulong Snow Mountain and Tienshan glacier. Conversely, biomass burning tracers in cryoconites of Dongkemadi, Yuzhufeng, Muztag, Qiyi and Laohugou glaciers are derived from the combustion of different types of biomass including softwood, hardwood and grass.

Particulate matter (PM10) is the key indicator of air quality index in Brunei Darussalam and the principal pollutant for haze related episodes in Southeast Asia. This study examined the temporal and spatial distribution of PM10 base on a long-term monitoring data (2009–2014) in order to identify the emission sources and favorable meteorological conditions for high PM10 concentrations across the country. PM10 concentrations measured at the various locations differ significantly but the general temporal characteristics show clear patterns of seasonal variations across the country with the highest concentrations recorded during the southwest monsoon. The high PM10 values defined in the study were not evenly distributed over the years but occurred mostly within the southwest monsoon months of June to September. Further investigations with bivariate polar concentrations plots and k-means clustering demonstrated the significant influence of Southeast Asian regional biomass fires on the high PM10 concentrations recorded across the country. The results of the polar plots and cluster analyses were further confirmed by the evaluations with Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) backward air masses trajectories analysis and the Moderate Resolution Imaging Spectroradiometer (MODIS) fire records. Among the meteorological variables considered, temperature, rainfall and relative humidity were the most important meteorological variables that influence the concentration throughout the year. High PM10 values are associated with high temperatures and low amounts of rainfall and relative humidity. In addition, wind speed and direction also play significant role in the recorded high PM10 concentrations and were mainly responsible for its seasonality during the study period.

We analysed the variability of equivalent black carbon (BC) and ozone (O3) at the global WMO/GAW station Nepal Climate Observatory-Pyramid (NCO-P, 5079 m a.s.l.) in the southern Himalayas, for evaluating the possible contribution of open vegetation fires to the variability of these short-lived climate forcers/pollutants (SLCF/SLCP) in the Himalayan region.We found that 162 days (9% of the data-set) were characterised by acute pollution events with enhanced BC and O3 in respect to the climatological values. By using satellite observations (MODIS fire products and the USGS Land Use Cover Characterization) and air mass back-trajectories, we deduced that 56% of these events were likely to be affected by emissions from open fires along the Himalayas foothills, the Indian Subcontinent and the Northern Indo-Gangetic Plain.These results suggest that open fire emissions are likely to play an important role in modulating seasonal and inter-annual BC and O3 variability over south Himalayas.

The Positive Matrix Factorization (PMF) receptor model and the Observation Based Model (OBM) were combined to analyze volatile organic compound (VOC) data collected at a suburban site (WQS) in the PRD region. The purposes are to estimate the VOC source apportionment and investigate the contributions of these sources and species of these sources to the O₃ formation in PRD. Ten VOC sources were identified. We further applied the PMF-extracted concentrations of these 10 sources into the OBM and found "solvent usage 1", "diesel vehicular emissions" and "biomass/biofuel burning" contributed most to the O₃ formation at WQS. Among these three sources, higher Relative Incremental Reactivity (RIR)-weighted values of ethene, toluene and m/p-xylene indicated that they were mainly responsible for local O₃ formation in the region. Sensitivity analysis revealed that the sources of "diesel vehicular emissions", "biomass/biofuel burning" and "solvent usage 1" had low uncertainties whereas "gasoline evaporation" showed the highest uncertainty.

Agricultural residue burning is one of the major causes of greenhouse gas emissions and aerosols in the Indo-Ganges region. In this study, we characterize the fire intensity, seasonality, variability, fire radiative energy (FRE) and aerosol optical depth (AOD) variations during the agricultural residue burning season using MODIS data. Fire counts exhibited significant bi-modal activity, with peak occurrences during April–May and October–November corresponding to wheat and rice residue burning episodes. The FRE variations coincided with the amount of residues burnt. The mean AOD (2003–2008) was 0.60 with 0.87 (+1σ) and 0.32 (−1σ). The increased AOD during the winter coincided well with the fire counts during rice residue burning season. In contrast, the AOD-fire signal was weak during the summer wheat residue burning and attributed to dust and fossil fuel combustion. Our results highlight the need for ‘full accounting of GHG’s and aerosols’, for addressing the air quality in the study area.

monitoring sites operated by the National Park Service in Sierra Nevada, California, are used to develop an ozone forecasting model and to estimate the contribution of wildland fires on ambient ozone levels. The analyses of weather and ozone data pointed to the transport of ozone precursors from the Central Valley as an important source of pollution in these National Parks. Comparisons of forecasted and observed values demonstrated that accurate forecasts of next-day hourly ozone levels may be achieved by using a time series model with historic averages, expected local weather and modeled PM values as explanatory variables. Results on fire smoke influence indicated occurrence of significant increases in average ozone levels with increasing fire activity. The overall effect on diurnal ozone values, however, was small when compared with the amount of variability attributed to sources other than fire. We have demonstrated that it is possible to produce accurate forecasts of next-day hourly ozone levels in the Sierra Nevada, CA, during fire season.

Iron oxides are important pedogenic Cr(III)-bearing phases which experience high-temperature alteration via fire-induced heating of surface soil. In this study, we examine if heating-induced alteration of Cr(III)-substituted Fe oxides can potentially facilitate rapid high-temperature oxidation of solid-phase Cr(III) to hazardous Cr(VI). Synthetic Cr(III)-substituted ferrihydrite, goethite and hematite were heated up to 800 °C for 2 h. Corresponding heating experiments were also conducted on an unpolluted Ferrosol-type soil, which had a total Cr content of 220 mg kg⁻¹, initially undetectable Cr(VI) and Fe speciation comprising a mixture of hematite, goethite and ferrihydrite (according to Fe K-edge EXAFS spectroscopy). Up to ∼50% of the initial Cr(III) was oxidised to Cr(VI) during heating of Cr(III)-substituted ferrihydrite and hematite, with the greatest extent of Cr(VI) formation occurring at 200–400 °C. In contrast, heating of Cr(III)-substituted goethite resulted in up to ∼100% of Cr(III) oxidizing to Cr(VI) as the temperature approached 800 °C. In the Ferrosol-type soil, heating at ≥400 °C also resulted in large amounts of Cr(VI) formation, with a maximum total Cr(VI) concentration of 77 mg kg⁻¹ forming at 600 °C (equating to oxidation of ∼35% of the soil's total Cr content). A relatively large portion (31–42%) of the total Cr(VI) which formed during heating of the soil was exchangeable, implying a high level of potential mobility and bioaccessibility. Overall, the results show that Cr(VI) forms rapidly via the oxidation of Fe oxide-bound Cr(III) at temperatures which occur in surface soils during fires. On this basis and given the frequency and extent of wild-fires around the world, we propose that fire-induced oxidation of Fe oxide-bound Cr(III) may represent a globally-significant pathway for the natural formation of hazardous Cr(VI) in surface soil.

Polybrominated diphenyl ethers (PBDEs) have been used in a broad array of polymeric materials such as plastics, foams, resins and adhesives to inhibit the spread of fires since the 1970s. The widespread environmental contamination and well documented toxic effects of PBDEs have led to bans and voluntary withdrawals in many jurisdictions. Replacement novel brominated flame retardants (NBFRs) have, however, exhibited many of the same toxic characteristics as PBDEs and appear to share similar environmental fate. This paper presents a critical review of the scientific literature regarding PBDE and NBFR contamination of surface soils internationally, with the secondary objective of identifying probable pollution sources. An evaluation of NBFR distribution in soil was also conducted to assess the suitability of the newer compounds as replacements for PBDEs, with respect to their land contamination potential. Principle production of PBDEs and NBFRs and their consequent use in secondary polymer manufacture appear to be processes with strong potential to contaminate surrounding soils. Evidence suggests that PBDEs and NBFRs are also released from flame retarded products during disposal via landfill, dumping, incineration and recycling. While the land application of sewage sludge represents another major pathway of soil contamination it is not considered in this review as it is extensively covered elsewhere. Both PBDEs and NBFRs were commonly detected at background locations including Antarctica and northern polar regions. PBDE congener profiles in soil were broadly representative of the major constituents in Penta-, Octa- and Deca-BDE commercial mixtures and related to predicted market place demand. BDE-209 dominated soil profiles, followed by BDE-99 and BDE-47. Although further research is required to gain baseline data on NBFRs in soil, the current state of scientific literature suggests that NBFRs pose a similar risk to land contamination as PBDEs.

The interactions between aerosols, clouds, and precipitation remain among the largest sources of uncertainty in the Earth's energy budget. Biomass-burning aerosols are a key feature of the global aerosol system, with significant annually-repeating fires in several parts of the world, including Southeast Asia (SEA). SEA in particular provides a “natural laboratory” for these studies, as smoke travels from source regions downwind in which it is coupled to persistent stratocumulus decks. However, SEA has been under-exploited for these studies. This review summarizes previous related field campaigns in SEA, with a focus on the ongoing Seven South East Asian Studies (7-SEAS) and results from the most recent BASELInE deployment. Progress from remote sensing and modeling studies, along with the challenges faced for these studies, are also discussed. We suggest that improvements to our knowledge of these aerosol/cloud effects require the synergistic use of field measurements with remote sensing and modeling tools.