The plastic debris that washes ashore and litters the shoreline often undergoes weathering under sunlight exposure, such that it fragments to form nanoplastics and microplastics, but the fragmentation rate for many thermoplastics is unknown. In this study, three major thermoplastics were exposed to simulated sunlight in an accelerated weathering chamber to evaluate the speed of photooxidation-induced fragmentation. The initiation of photooxidation-induced fragmentation extrapolated from the accelerated weathering chamber to real sunlight exposure in South Korea followed the order of PS (< 1 year) > PP (< 2 years) > LDPE (> 3 years). The surface cracks created by photooxidation were not directly reflected in the initiation of fragmentation of thermoplastics. The initiation of fragmentation was faster in PS than other polymers, but the total abundance of particles produced, and increasing ratio (exposure/non-exposure) were comparable or lower than those of PP. The increasing ratio pattern between nanoplastics and small microplastics of PP differed noticeably from other polymers. The initiation of nanoplastic and small-microplastic fragmentation determined in this study will be useful for the further estimation of secondary microplastic production by weathering and thus for decision-making regarding methods for the timely removal of plastic litter in the environment.

Beach environments are known to be conducive to fragmentation of plastic debris, and highly fragmented plastic particles can interact with smaller organisms. Even through stranded plastic debris may not interact directly with marine organisms, backwash processes may transport this debris back to coastal waters, where it may affect a wide range of marine life at different trophic levels. This study analysed the size distribution of stranded plastic debris (<10 mm) collected from eight coastal beaches in Guangdong Province, China. Polystyrene (PS) foams and fragments smaller than 7 mm were increasingly abundant in the smaller size classes, whereas resin pellets remained in their production sizes (∼3 mm). Microplastics (<5 mm) accounted for over 98% of the total plastic debris by abundance and 71% by weight, indicating that the plastic debris on these coastal beaches was highly fragmented and the majority of the plastic masses belonged to the microplastic size range. The observed size distributions of PS foams and fragments are believed to result from continued fragmentation. Previous studies found that the residence time of beached debris was less than one year on average, and no sign of plastic accumulation with depth in beach sediment was observed. Therefore, coastal beaches may represent a reservoir of highly fragmented and degraded microplastics that may be mobilised and returned to the sea during storm events. Further research on the dynamics and longevity of microplastics on beaches will help reveal the mass balance of microplastics on the shoreline and determine whether shorelines are sinks or sources of microplastics.

Anthropogenic activities significantly influence the lake environment and are reflected by the element contents in sediments/soils. The lake fragmentation provides a unique opportunity for comparing the influences of natural/anthropogenic activities of different wetlands systems. In this study, a complex and fragmented lake was investigated, and sediment/soil samples were collected from different systems. The nutrient contents (C, N, and P), stable isotopic compositions (δ¹³C and δ¹⁵N), and trace metal contents (As, Cd, Cr, Cu, Ni, Pb, and Zn) in the sediments/soils were measured to determine the natural and anthropogenic influences and pollution sources. Lake fragmentation was caused by insufficient water input and long-term agricultural and aquacultural activities of local residents. Due to the effect of anthropogenic activities, the enrichment conditions of various elements differed significantly for different wetland systems. Industrial, agricultural, and biological sources significantly influenced the element enrichment in different systems. The results demonstrated that the anthropogenic activities significantly influenced the sediments/soils in wetland systems, and the lake fragmentation reduced the diffusion of the contaminants. These results provide accurate reference information for pollution control, lake management, and ecological restoration.

The present study was carried out to quantify microplastic prevalence among 20 sandy beaches on the Gujarat coast. Beaches were categorised into three different classes, viz. low-impacted sites, moderately impacted sites, and highly impacted sites based on anthropogenic pressure. Microplastic (MP) (≤ 5 mm) contamination on the beaches varied with an average of 1.4 MPs/kg to 26 MPs/kg sediment. Sutrapada site-1 and Porbandar showed the highest and lowest mean abundance of microplastics, respectively, among 20 selected beaches. Out of the total assessed microplastics, threads were the maximum (89.98%), followed by the films (4.75%), fragments (3.36%) and foam (1.89%). In terms of colour and size, different microplastics were recorded in this study. The chemical composition of microplastics was identified by ATR-FTIR as polypropylene (47.5%), polyethylene (26%), and polystyrene (25%). Tourism and fishing activities are the possible sources of higher microplastic contamination at highly impacted sites.

Microplastics [MPs], now a ubiquitous pollutant in the oceans, pose a serious potential threat to marine ecology and has justifiably encouraged focused biological and ecological research attention. But, their generation, fate, fragmentation and their propensity to sorb/release persistent organic pollutants (POPs) are determined by the characteristics of the polymers that constitutes them. Yet, physico-chemical characteristics of the polymers making up the MPs have not received detailed attention in published work. This review assesses the relevance of selected characteristics of plastics that composes the microplastics, to their role as a pollutant with potentially serious ecological impacts. Fragmentation leading to secondary microplastics is also discussed underlining the likelihood of a surface-ablation mechanism that can lead to preferential formation of smaller sized MPs.

Fragmentation of plastic macro-debris into secondary microplastics [MPs] is primarily the result of their extensive oxidation under exposure to solar UV radiation. The heterogeneity in the marine zones with respect to their oxidative potential for plastics, introduces a marked zonal bias in their ability to carry out weathering and fragmentation. Comparing the oxidative environments of the beach zone and the upper pelagic zone with floating plastics, it is argued that the latter tends to preclude photooxidative fragmentation. Abundant MPs found in seawater are therefore more likely to have originated on beaches or land and subsequently transferred to the water, as opposed to being generated by weathering of floating plastic stock. Laboratory-accelerated weathering of plastics in seawater obtains efficient micro-fragmentation and in some instances photo- dissolution of the plastic debris, but these results cannot be reliably extrapolated to natural weathering conditions in the ocean environment.

The increase of plastic production from the middle of the twentieth century was inevitably followed by an increase in the amount of plastic dumped in the natural environment. There, the plastic debris are exposed to sunlight, temperature, humidity, and physical stress. This can induce photo-oxidative and thermal degradation. This review discusses the mechanism of plastics UV weathering and its characteristics. Comparison of the photodegradation rate and physico-chemical properties are made according to the weathering mode (natural/accelerated) and medium (air/water). Since the photodegradation can lead to plastics fragmentation, this phenomenon is described along with the methodologies used in literature to evaluate the fragmentation. The impact of the photodegraded plastic debris on the marine environment is also presented in term of (i) photodegradation products and stabilizers leakage, (ii) organic pollutants accumulation, transfer, and leakage, and (iii) toxicity on marine organisms.

Research on plastics fragmentation is important for the estimation of amount of microplastics but the biological causes for fragmentation have not been acknowledged. From microplastics collected in the beaches of Hong Kong, we revealed an abnormal type of fragment which has not been reported before. These fragments, composing about 6% of the microplastics (pellet, foam, bead, fragment) collected, were interestingly triangular in shape with at least two of the three sides being characteristically straight and resembling a cut made by compression. Objective observations have distinguished these “trimmed triangular fragments” to those triangular fragments that were fractured randomly. By comparing with additional evidence, we proposed that these trimmed fragments were the daughter pieces of macrofaunal biting. If this was so, there would be wide implications on fragmentation modeling studies for microplastics since active biting of large plastic debris has generally not been considered as a factor of plastics fragmentation.

Macro- and microplastics abundances were determined in the Adriatic Sea following the MSFD TG10 protocol. The studied areas included populated gulfs, river outlets and offshore waters in five Adriatic countries. The use of small ships enabled us to detect small sized plastics (2.5–5 cm) and record average macroplastics densities of 251 ± 601 items km−2, one order of magnitude higher than previously considered. Results from manta net tows for microplastics revealed an average abundance of 315,009 ± 568,578 items km−2 (217 ± 575 g km−2). We found significantly higher microplastics abundances in nearshore (≤4 km) than in offshore waters (>4 km) and this trend seems to affect also the small sized macro plastic fragments (2.5–5 cm). The dominant polymers were polyethylene and polypropylene while the presence of some rare polymers and waxes used in food and dentistry indicated waste water treatment plants as potential sources of microplastics.

The increasing global contamination of plastics in marine environments is raising public concerns about the potential hazards of microplastics to environmental and human health. Microplastics formed by the breakdown of larger plastics are typically irregular in shape. The objective of this study was to compare the effects of spherical or irregular shapes of microplastics on changes in organ distribution, swimming behaviors, gene expression, and enzyme activities in sheepshead minnow (Cyprinodon variegatus). Both types of microplastics accumulated in the digestive system, causing intestinal distention. However, when compared to spherical microplastics, irregular microplastics decreased swimming behavior (i.e., total distance travelled and maximum velocity) of sheepshead minnow. Both microplastics generated cellular reactive oxygen species (ROS), while ROS-related molecular changes (i.e., transcriptional and enzymatic characteristics) differed. This study provides toxicological insights into the impacts of environmentally relevant (fragmented) microplastics on fish and improves our understanding of the environmental effects of microplastics in the ecosystem.