An in situ particle imaging system for measurement of high concentrations of suspended particles ranging from 30 μm to several mm in diameter, is presented. The system obtains quasi-silhouettes of particles suspended within an open-path sample volume of up to 5 cm in length. Benchmarking against spherical standards and the LISST-100 show good agreement, providing confidence in measurements from the system when extending beyond the size, concentration and particle classification capabilities of the LISST-100. Particle-specific transmittance is used to classify particle type, independent of size and shape. This is applied to mixtures of oil droplets, gas bubbles and oil-coated gas bubbles, to provide independent measures of oil and gas size distributions, concentrations, and oil-gas ratios during simulated subsea releases. The system is also applied to in situ measurements of high concentrations of large mineral flocs surrounding a submarine mine tailings placement within a Norwegian Fjord. | publishedVersion

Chlorinated paraffins (CPs) were found in the biodegradable fraction of source separated waste from Uppsala, Sweden. We identified and quantified the CPs by multivariate evaluation of gas chromatography-electron capture detection chromatograms. Using principal component analyses (PCA) we identified different types of CP-formulations and also obtain quantitative data. PCA yielded better identifications of individual CP-formulations than visual comparison of chromatograms. Partial least squares regression gave good calibration curves of the standards, but did not work for the waste samples. No source of CPs could be identified in the waste collection chain, and as the waste samples seemed to contain at least two different CP-formulations the source was probably to be found in the waste material itself. The method was used to determine CPs in additional environmental samples, demonstrating that multivariate methods may be developed into a powerful tool for identification and quantification of complex mixture.

Eels are an ideal biomonitor for persistent organic pollutants (POPs) because of their high lipid content, longevity and tendency to remain within a defined range during their freshwater life phase. This study investigated concentrations of POPs in eels (Anguilla anguilla) from 30 sites across Scotland, including polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (BDEs), DDT (and metabolites), hexachlorocyclohexanes (α, β, γ-HCH), hexachlorobenzene (HCB), hexachlorobutadiene (HCBD) and pentachlorobenzene. Despite its EU-wide ban ∼30 years ago, DDT and its derivatives were detected in almost all samples. PCB 153 and 138 were the most widely detected PCB congeners, while BDE 47 was the dominant BDE. Pentachlorobenzene was not detected, while HCBD was detected once only. α-HCH, β-HCH and HCB concentrations were very low (generally <3 μg/kg or below detection). When compared with 1986 and 1995 data, the results revealed considerable decreases in p,p′-DDE concentrations. More drastic reductions were evident for γ-HCH, reflecting the tightening restrictions on pesticide use imposed over the previous decades.

The impact of residual PAHs (2250 ± 71 μg total PAHs g−1) following enhanced natural attenuation (ENA) of creosote-contaminated soil (7767 ± 1286 μg total PAHs g−1) was assessed using a variety of ecological assays. Microtox™ results for aqueous soil extracts indicated that there was no significant difference in EC50 values for uncontaminated, pre- and post-remediated soil. However, in studies conducted with Eisenia fetida, PAH bioaccumulation was reduced by up to 6.5-fold as a result of ENA. Similarly, Beta vulgaris L. biomass yields were increased 2.1-fold following ENA of creosote-contaminated soil. While earthworm and plant assays indicated that PAH bioavailability was reduced following ENA, the residual PAH fraction still exerted toxicological impacts on both receptors. Results from this study highlight that residual PAHs following ENA (presumably non-bioavailable to bioremediation) may still be bioavailable to important receptor organisms such as earthworms and plants. Residual PAHs in creosote-contaminated soil following enhanced natural attenuation impacted negatively on ecological receptors.

A pesticide runoff event was simulated on two 10 m x 50 m constructed wetlands (one non-vegetated, one vegetated) to evaluate the fate of methyl parathion (MeP) (Penncap-M). Water, sediment, and plant samples were collected at five sites downstream of the inflow for 120 d. Semi-permeable membrane devices (SPMDs) were deployed at each wetland outflow to determine exiting pesticide load. MeP was detected in water at all locations of the non-vegetated wetland (50 m), 30 min post-exposure. MeP was detected 20 m from the vegetated wetland inflow 30 min post-exposure, while after 10d it was detected only at 10 m. MeP was measured only in SPMDs deployed in non-vegetated wetland cells, suggesting detectable levels were not present near the vegetated wetland outflow. Furthermore, mass balance calculations indicated vegetated wetlands were more effective in reducing aqueous loadings of MeP introduced into the wetland systems. This demonstrates the importance of vegetation as sorption sites for pesticides in constructed wetlands.

Hydrostatic pressure enhances gas solubility and potentially alters toxicity and risks of oil and gas releases to deep-sea organisms. This study has two primary objectives. First, the aquatic hazard of dissolved hydrocarbon gases is characterized using results of previously published laboratory and field studies and modeling. The target lipid model (TLM) is used to predict effects at ambient pressure, and results are compared to effect concentrations derived from extrapolation of liquid alkane hazard data. Second, existing literature data are used to quantify and predict pressure effects on toxicity using an extension of the TLM framework. Results indicate elevated pressure mitigates narcosis, particularly for sensitive species. A simple adjustment is proposed to allow TLM-based estimates of acute effect and TLM-derived HC5 values (concentrations intended to provide 95% species protection) for oil or gas constituents to be calculated at depth. Future applications, and opportunities and challenges for providing validation, are discussed.

Tar balls are prevalent in oceans and the coastal environment; however, their origins are not well constrained on a global scale. To address this, we used gas chromatography to analyze the molecular composition of a unique set of 100 pelagic tar balls collected in the Western North Atlantic and Caribbean Sea between 1988 and 2016. Hierarchal cluster analysis (HCA) was employed to classify the samples into groups based on the relative proportions of resolved and unresolved hydrocarbon distributions. Additional analysis of polycyclic aromatic hydrocarbons revealed that 28% of samples originated from heavy fuel oils and therefore had anthropogenic origins consistent with the classifications based on HCA. Other samples examined could originate from anthropogenic or natural origins, such as natural seeps. This study provides a preliminary record of 100 classified pelagic tar ball samples and demonstrates an approach to determine their origin to the environment.

An in situ particle imaging system for measurement of high concentrations of suspended particles ranging from 30μm to several mm in diameter, is presented. The system obtains quasi-silhouettes of particles suspended within an open-path sample volume of up to 5cm in length. Benchmarking against spherical standards and the LISST-100 show good agreement, providing confidence in measurements from the system when extending beyond the size, concentration and particle classification capabilities of the LISST-100. Particle-specific transmittance is used to classify particle type, independent of size and shape. This is applied to mixtures of oil droplets, gas bubbles and oil-coated gas bubbles, to provide independent measures of oil and gas size distributions, concentrations, and oil-gas ratios during simulated subsea releases. The system is also applied to in situ measurements of high concentrations of large mineral flocs surrounding a submarine mine tailings placement within a Norwegian Fjord.

The vertical concentration profiles and source contributions of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in respirable particle samples (PM₄) collected at 10, 100, 200 and 300-m altitude from the Milad Tower of Tehran, Iran during fall and winter were investigated. The average concentrations of total PAHs and total n-alkanes were 16.7 and 591 ng/m³, respectively. The positive matrix factorization (PMF) model was applied to the chemical composition and wind data to apportion the contributing sources. The five PAH source factors identified were: ‘diesel’ (56.3 % of total PAHs on average), ‘gasoline’ (15.5 %), ‘wood combustion, and incineration’ (13 %), ‘industry’ (9.2 %), and ‘road soil particle’ (6.0 %). The four n-alkane source factors identified were: ‘petrogenic’ (65 % of total n-alkanes on average), ‘mixture of petrogenic and biomass burning’ (15 %), ‘mixture of biogenic and fossil fuel’ (11.5 %), and ‘biogenic’ (8.5 %). Source contributions by wind sector were also estimated based on the wind sector factor loadings from PMF analysis. Directional dependence of sources was investigated using the conditional probability function (CPF) and directional relative strength (DRS) methods. The calm wind period was found to contribute to 4.4 % of total PAHs and 5.0 % of total n-alkanes on average. Highest average concentrations of PAHs and n-alkanes were found in the 10 and 100 m samples, reflecting the importance of contributions from local sources. Higher average concentrations in the 300 m samples compared to those in the 200 m samples may indicate contributions from long-range transport. The vertical profiles of source factors indicate the gasoline and road soil particle-associated PAHs, and the mixture from biogenic and fossil fuel source-associated n-alkanes were mostly from local emissions. The smaller average contribution of diesel-associated PAHs in the lower altitude samples also indicates that the restriction of diesel-fueled vehicle use in the central area of Tehran has been effective in reducing the PAHs concentration.

The different barks were sampled to discuss the influence of the tree species, trunk circumference, and bark thickness on the accumulation processes of polybrominated diphenyl ethers (PBDEs) from air into the bark. The results of different PBDE concentrations indicated that barks with a thickness of 0–3 mm collected from weeping willow, Camphor tree, and Masson pine, the trunk circumferences of which were 100 to 150 cm, were better PBDEs passive samplers. Furthermore, tree bark and the corresponding air samples were collected at Anji (AJ), Hangzhou (HZ), Shanghai (SH), and Wenling (WL) to investigate the relationship between the PBDE concentrations in bark and those in air. In addition, the significant correlation (r² = 0.906; P < 0.05) indicated that atmospheric PBDEs were the principle source for the accumulation of PBDEs in the barks. In this study, the log K BA (bark–air partition coefficient) of individual PBDE congeners at the four sites were in the range from 5.69 to 6.79. Finally, the total PBDE concentration in WL was 5 to 20 times higher than in the other three cities. The result indicated that crude household workshops contributed a heavy amount of PBDEs pollution to the environment, which had been verified by the spatial distribution of PBDEs levels in barks collected at Wenling (range, 26.53–1317.68 ng/g dw). The good correlation between the PBDE concentrations in the barks and the air samples and the variations of the PBDE concentrations in tree barks collected from different sites reflected that the bark could be used as a passive sampler to indicate the atmospheric PBDEs.