Refinar búsqueda
Resultados 1-10 de 19
Iced block method: An efficient method for preparation of micro-sized expanded polystyrene foams
2020
Kwak, Jin Il | An, Youn-Joo
Recently, numerous studies concerning dye-labeled microplastic beads have reported on the end-of-life, environmental effects of microplastics because of their ubiquitous commercial usage. Less is understood about the toxicity and bioaccumulation of plastics other than microplastic beads, which can also harm the environment (e.g., fragments, fibers, foams, and films). Expanded polystyrene (EPS) is widespread in the environment owing to its many uses, however, limited research has been conducted on EPS foams. This study focuses on developing an efficient method for the preparation of micro-sized EPS foams for research purposes and compares it with previous microplastics preparation methods reported in 68 previous studies. It was demonstrated that the iced EPS block method (iced EPS block + water) generated larger quantities of smaller-sized EPS foams (20–200 and 200–500 μm) compared to the EPS + ice + water and EPS + water methods. The optimal protocol includes 1) iced EPS block preparation, 2) grinding and sieving, and 3) collecting. Additionally, it was confirmed that the iced EPS block method requires less money, labor, and time compared to previously reported methods in the literature. The method proposed in this research can assist future investigations into the environmental effects of EPS foams.
Mostrar más [+] Menos [-]Mechanism of uranium release from uranium mill tailings under long-term exposure to simulated acid rain: Geochemical evidence and environmental implication
2019
Yin, Meiling | Sun, Jing | Chen, Yongheng | Wang, Jin | Shang, Jianying | Belshaw, Nick | Shen, ChuanChou | Liu, Juan | Li, Huosheng | Linghu, Wensheng | Xiao, Tangfu | Dong, Xinjiao | Song, Gang | Xiao, Enzong | Chen, Diyun
To date, there is not sufficient knowledge to fully understand the occurrence, transport and fate of residual uranium (U) from uranium mill tailings (UMT). Herein this study investigated different U release behaviors from natural UMT (without grinding) under four simulated acid rain (pH = 2.0–5.0) compared with controlled scenario (pH = 6.0) for 25 weeks. The results showed that the most notable U release was observed from UMTₚH₂.₀, followed by UMTₚH₃.₀ whereas a nonlinear relationship between pH and U release was observed from UMTₚH₄.₀–₆.₀. The divergence of U release behaviors was attributed to the presence of minerals such as calcite and clinochlore. Autunite, a secondary mineral formed after leaching, might regulate U release in UMTₚH₃.₀–₆.₀. Fick theory model revealed the shift of U release mechanism from surface dissolution to diffusion transport for UMTₚH₂.₀, UMTₚH₃.₀ and UMTₚH₅.₀ at varied stage, whereas UMTₚH₄.₀ and UMTₚH₆.₀ displayed univocal dissolution and diffusion mechanism, respectively. This study highlights the necessity of performing long-term leaching tests to detect the “shift event” of leaching kinetics and to better understand the mechanism of U release influenced by mineralogy of the natural UMT under simulated acid rain conditions, which is conducive to developing UMT management strategies to minimize the risk of U release and exposure.
Mostrar más [+] Menos [-]Species-dependent effects of biochar amendment on bioaccumulation of atrazine in earthworms
2014
Wang, Fang | Ji, Rong | Jiang, Zhongwei | Chen, Wei
We observed that at a contamination level of 4.25 mg-atrazine/kg-soil, the biota–soil accumulation factor (BSAF) for the anecic M. guillelmi is approximately 5 times that for the epigeic E. foetida. This is attributable to the fact that bio-uptake by E. foetida is mainly through dermal absorption, whereas bio-uptake by M. guillelmi is largely affected by the gut processes, through which the physical grinding and surfactant-like materials facilitate the desorption of atrazine from soil. Strikingly, biochar amendment resulted in much greater reduction in BSAF for M. guillelmi than for E. foetida. At a biochar dose of 0.5% (wt:wt) the difference in BSAF between the two species became much smaller, and at a dose of 2% no statistical difference was observed. A likely explanation is that gut processes by M. guillelmi were much less effective in extracting atrazine from the biochar (the predominant phase wherein atrazine resided) than from soil particles.
Mostrar más [+] Menos [-]The reactive oxygen species as pathogenic factors of fragmented microplastics to macrophages
2021
Jeon, Soyeon | Lee, Dong Keun | Jeong, Jiyoung | Yang, Sung Ik | Kim, Ji-Su | Kim, Jinsik | Cho, Wan-Seob
The presence of microplastics in the various food web raised concerns on human health, but little is known about the target cells and mechanism of toxicity of microplastics. In this study, we evaluated the toxicity of microplastics using relevant cell lines to the oral route of exposure. Approximately 100 μm-sized fragment-type polypropylene (PP) and polystyrene (PS) particles were prepared by sieving after pulverization and further applied the accelerated weathering using ultraviolet and heat. Thus, the panel of microplastics includes fresh PP (f-PP), fresh PS (f-PS), weathered PP (w-PP), and weathered PS (w-PS). The spherical PS with a similar size was used as a reference particle. Treatment of all types of PP and PS did not show any toxic effects to the Caco-2 cells and HepG2 cells. However, the treatment of microplastics to THP-1 macrophages showed significant toxicity in the order of f-PS > f-PP > w-PS > w-PP. The weathering process significantly reduced the reactive oxygen species (ROS) generation potential of both microplastics because the weathered microplastics have an increased affinity to bind serum protein which acts as a ROS scavenger. The intrinsic ROS generation potential of microplastics showed a good correlation with the toxicity endpoints including cytotoxicity and pro-inflammatory cytokines in THP-1 macrophages. In conclusion, the results of this study suggest that the target cell type of microplastics via oral administration can be macrophages and the pathogenic factor to THP-1 macrophages is the intrinsic ROS generation potential of microplastics. Nevertheless, the toxic effect of microplastics tested in this study was much less than that of nano-sized particles.
Mostrar más [+] Menos [-]Adsorption of indigo carmine on Pistia stratiotes dry biomass chemically modified
2019
Ferreira, Rachel M. | de Oliveira, Nazaré M. | Lima, Lorenna L. S. | Campista, Ana Laura D. M. | Stapelfeldt, Danielle M. A.
Pistia stratiotes is a common aquatic plant of the northern region of the state of Rio de Janeiro, and its use as adsorbent material was studied in the present work. The preparation process included washing, drying, grinding, and acid activation. The sorption potential for removal of the indigo carmine dye from aqueous solutions was tested under various conditions, such as initial concentration, contact time, and temperature. The tests showed that the obtained biosorbent showed good performance for dye removal with a maximum capacity of 41.2 mg/g. The kinetic studies revealed that the pseudo-second-order equation provided the best fit of the experimental data. The Freundlich isotherm provided the best fit of the experimental sorption data for the system under study. The results obtained show that Pistia stratiotes has great potential to be used as biosorbent for the removal of dyes from aqueous solutions.
Mostrar más [+] Menos [-]Enhanced adsorption of cationic Pb(II) and anionic Cr(VI) ions in aqueous solution by amino-modified nano-sized illite-smectite clay
2019
Li, Zhenyuan | Pan, Zhidong | Wang, Yanmin
A raw illite-smectite mixed-layered clay (RI/S) was ground for preparing nano-sized I/S clay (NI/S) and subsequently amino-functionalized via grafting of 3-aminopropyltrithoxysilane (APTES) (NH₂-RI/S and NH₂-NI/S, respectively). The samples were characterized by particle size analysis, specific surface area measurement, X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and ²⁹Si nuclear magnetic resonance (²⁹Si NMR). Compared to RI/S, NI/S has a narrow particle size distribution and appears in a platelet-like morphology due to the disintegration/exfoliation of RI/S after grinding. Based on the ²⁹Si NMR spectra, the appearances of tri-silicate units indicate the chemically grafting of APTES molecules on NH₂-RI/S and NH₂-NI/S, respectively. NH₂-NI/S can adsorb greater amounts of Pb(II) cations and Cr(VI) anions rather than NH₂-RI/S since NH₂-NI/S grafts more amounts of amine groups (-NH₂). The isotherm data for adsorption of Pb(II) cations and Cr(VI) anions can be described by the Langmuir model at different temperatures (i.e., 10 °C, 30 °C, and 50 °C), respectively. The maximum adsorption amounts of Pb(II) cations and Cr(VI) anions onto NH₂-NI/S calculated by the Langmuir isotherm model are 131.23 mg/g and 36.91 mg/g at 50 °C, respectively. The adsorptions of Pb(II) cations and Cr(VI) anions onto NH₂-NI/S involve in the surface complexation of NI/S and amine groups.
Mostrar más [+] Menos [-]Smooth Brome (Bromus inermis Leyss) and Soil Chemical Response to Concrete Grinding Residue Application
2011
DeSutter, Tom | Goosen-Alix, Patricia | Prunty, Lyle | White, Paul, Jr | Casey, Frank
Concrete grinding residue (CGR) is a by-product created by concrete pavement maintenance operations. The application of CGR to roadside soils is not consistently regulated by state agencies across the USA, which is partially due to the lack of science-based information on its impacts to soils and plants. The objectives of this research were to determine the impact of CGR additions to soil on both smooth brome (Bromus inermis L.) biomass and plant and soil chemical parameters. In a greenhouse study, two soils were treated with two CGR by-products at 8% and 25% by weight. Shoot biomass was significantly influenced by the main effects (Soil, CGR, and Rate) and by all two-way interactions, but not consistently positively or negatively correlated. Trace metal concentrations in the shoot biomass were variable, but 68% of these metals had the same concentration or lower in the 25% CGR treatments compared with the controls. Soil pH and electrical conductivity were significantly influenced by the main effects and two-way interactions of Soil × Rate and CGR × Rate, and soil pH was significantly greater in the CGR-treated soils. Calcium, Na, Mg, Al, and S concentrations in soils were all influenced by additions of CGR, but trace metal levels in the treatments were all within the range for uncontaminated soils. Ecosystem impact of applying CGR will be dependent upon the quality of CGR and soil characteristics. Controlling the liming potential of CGR should be considered a best management practice.
Mostrar más [+] Menos [-]Evaluation of Organic and Inorganic Compounds Extractable by Multiple Methods from Commercially Available Crumb Rubber Mulch
2018
Benoit, Gaboury | Demars, Sara
Recycled tires are often shredded for use in a variety of consumer-related products. The rubber so used may contain a number of compounds known to be deleterious to human and environmental health. We obtained nine samples of shredded tire material sold over the counter to the general public for home use, as well as six samples used for infill in synthetic turf athletic fields. After thorough cleaning and grinding, samples were extracted with either organic solvent (dichloromethane), strong acid, or simulated acid rain, or allowed to degas passively. Compounds released by these multiple methods were then identified, and in some cases quantified. Solvent extraction yielded 92 separate compounds, of which only about half have been tested for human health effects. Of these, nine are known carcinogens and another 20 are recognized irritants, including respiratory irritants that may complicate asthma. Strong acid extraction released measurable amounts of Pb and Cd and relatively large amounts of Zn. These three metals were specifically targeted for analysis, and others may be present as well, but were unmeasured. Simulated acid rain extracted only Zn in significant quantities. Passive volatilization yielded detectable amounts of 11 compounds. Results demonstrate that recycled tire materials contain and can release a wide variety of substances known to be toxic, and caution would argue against their use where human exposure is likely.
Mostrar más [+] Menos [-]Composites ZSM-5/KIT-6 Synthesized Via Assembly Modification Procedure and Mechanical Grinding Procedure, Respectively, and Their Application to CO2 Adsorption
2017
Lin, Zhifeng | Wei, Jianwen | Geng, Linlin | Mei, Dejun | Liao, Lei
The micro/mesoporous composite ZSM-5/KIT-6 was synthesized via the assembly procedure of preformed ZSM-5 seeds into mesostructured KIT-6, and mechanical mixtures with different contents of zeolite were prepared via a mechanical grinding procedure. These composites were used as adsorbents for the capture of CO₂ in the simulated flue gas conditions of 60 °C and 15 vol% CO₂ with a thermal gravimetric analyzer (TGA). The combination of dual-pore structures improved the adsorption performance. The composite synthesized via the assembly procedure exhibited superior adsorption capacity to the mechanical mixtures. The maximum adsorption capacity was 1.223 mmol/g. For mechanical mixtures, the adsorption capacity was dependent on the ZSM-5 content and increased with the increase of ZSM-5 content. The composite can be applied for CO₂ adsorption at flue gas temperature and desorption at regeneration temperature of 110 °C. The adsorption capacity showed only 3% attrition during five consecutive cyclic adsorption/desorption tests. The composites displayed excellent CO₂ adsorption/desorption performance.
Mostrar más [+] Menos [-]Life cycle assessment of autoclaved aerated fly ash and concrete block production: a case study in China
2019
Shi, Yifei | Li, Yue | Tang, Yuzhou | Yuan, Xueliang | Wang, Qingsong | Hong, Jinglan | Zuo, Jian
With the rapid development of construction industry, consumption of concrete block has increased rapidly in China. As a kind of green building material and resource comprehensive utilization product, autoclaved aerated fly ash and concrete block have better performance in terms of heat preservation, sound insulation, and fire resistance. However, some typical issues are associated with autoclaved aerated fly ash and concrete block production process such as energy and material consumption as well as pollutant emissions. To examine the environmental and economic impacts of its production process is imperative. Choosing 1 m³ of autoclaved aerated fly ash and concrete block product as functional unit and “cradle to gate” as system boundary, a life cycle inventory is developed. The key processes and key materials with significant environmental impact are identified. Results show that the top four environmental impact categories are marine ecotoxicity, freshwater ecotoxicity, freshwater eutrophication, and human toxicity. Key processes are fly ash slurry production, lime grinding, and steam curing processes. These processes account for 46.58%, 26.00%, and 19.62% of the total environmental load respectively. The key materials are cement, lime, and natural gas, which account for 44.91%, 22.79%, and 20.61% respectively of overall environmental impact. Sensitivity analysis shows that the fly ash slurry production should be optimized preferentially, followed by lime grinding and steam curing processes. These findings are helpful to facilitate the sustainable production of autoclaved aerated fly ash and concrete block.
Mostrar más [+] Menos [-]