Refinar búsqueda
Resultados 1-10 de 65
Phosphorus transport in riverbed sediments and related adsorption and desorption characteristics in the Beiyun River, China
2020
Liao, Renkuan | Hu, Jieyun | Li, Yunkai | Li, Shuqin
Riverbed sediments are the interface layer in riverine ecosystems connecting the overlying medium of water and the vadose zone. The transport behavior of phosphorus (P), which has been recognized as the primary cause of freshwater eutrophication, in riverbed sediments remains unclear. Understanding the impact of riverbed sediments on P transport is a necessary prerequisite for the development of appropriate strategies to reduce potential groundwater pollution. In this study, riverbed sediments were collected from the upstream, midstream, and downstream sections of the Beiyun River, China, and packed into vertical soil columns to perform leaching experiments to quantify P transport characteristics. In addition, the impact mechanisms were further explored by conducting laboratory batch tests of P adsorption and desorption. The results demonstrated that approximately 80% of P can be adsorbed by riverbed sediments in soil column leaching experiment, and a tailing phenomenon was observed in its desorption. The hydraulic conductivity properties of riverbed sediments were evaluated by the advection-dispersion equation, showing a gradually decreasing adsorption capacity for P from upstream to downstream sections, which was supported by the results obtained from adsorption–desorption thermodynamic and kinetic batch tests. The estimated annual leaching masses of P increased from 60.72 g/(m² a) in the upstream section to 132.31 g/(m² a) in the downstream section. The role of riverbed sediments as a source or sink of P is possibly determined by their coarse sand particles content, and the mean equilibrium P concentration (EPC0). The competitive relationship between P and other forms of nutrients also has an important influence on its source-sink role. These findings suggest that the prevention of the potential P leaching is most needed in the downstream sections of Beiyun River, and corresponding control strategies should be developed to avoid groundwater pollution.
Mostrar más [+] Menos [-]Size-dependent biochar breaking under compaction: Implications on clogging and pathogen removal in biofilters
2020
Lê, Hường | Valenca, Renan | Ravi, Sujith | Stenstrom, Michael K. | Mohanty, Sanjay K.
Breaking of biochar during compaction of amended soil in roadside biofilters or landfill cover can affect infiltration and pollutant removal capacity. It is unknown how the initial biochar size affects the biochar breaking, clogging potential, and contaminant removal capacity of the biochar-amended soil. We compacted a mixture of coarse sand and biochar with sizes smaller than, similar to, or larger than the sand in columns and applied stormwater contaminated with E. coli. Packing columns with biochar pre-coated with a dye and analyzing the dye concentration in the broken biochar particles eluted from the columns, we proved that biochar predominantly breaks under compaction by disintegration or splitting, not by abrasion. Increases in biochar size decrease the likelihood of biochar breaking. We attribute this result to the effective dissipation of compaction energy through a greater number of contact points between a large biochar particle and the adjacent particles. Most of the broken biochar particles are deposited in the pore spaces of the background geomedia, resulting in an exponential decrease in hydraulic conductivity of amended sand with an increase in suspended sediment loading. The clogging rate was higher in the columns with small biochar. The columns with small biochar also exhibited high E. coli removal capacity, partly because of an increase in bacterial straining at reduced pore size after compaction. These results are useful in selecting appropriate biochar size for its application in soils and roadside biofilters for stormwater treatment.
Mostrar más [+] Menos [-]A multi-path chain kinetic reaction model to predict the evolution of 1,1,1-trichloroethane and its daughter products contaminant-plume in permeable reactive bio-barriers
2019
Wang, Wenbing | Wu Yanqing,
Permeable reactive bio-barriers (Bio-PRBs) are a new and developing technique for in situ remediation of groundwater contamination. Some remediation technologies have often been impeded by insufficient understanding of contaminant transport and transformation in the subsurface environment. Therefore, advanced knowledge in contaminant transport and reactions in Bio-PRBs will be crucial to the successful practical application of this technique. A two-dimensional reaction model C1 was developed for predicting the multi-path chain kinetic reaction of 1,1,1-trichloroethane (1,1,1-TCA) in Bio-PRBs. This study demonstrates that model C1 is able to predict the 1,1,1-TCA breakthrough time and rapidly evaluate the Bio-PRBs retardation performance. The results show that microbial growth and immobilization are the key factors that affect the retardation and remediation performance of Bio-PRBs. The free growth of microorganisms had significant negative effects on hydraulic conductivity (K) in the zero-valent iron (ZVI) region of free microorganism Bio-PRBs (FM-PRBs). The total head loss in the FM-PRB was 9.0 cm, which was significantly greater than the head loss (6.5 cm) of immobilized microorganism Bio-PRBs (IM-PRBs). Compared to ZVI-PRBs and FM-PRBs, the numerical simulation results reveal that microbial immobilization significantly improves the remediation performance of IM-PRBs by 550.9% and 32.7%, respectively. The dual effect of microorganisms leads to significant differences in the 1,1,1-TCA and daughter products (1,1-dichloroethane, 1,1-dichloroethene, chloroethane and vinyl chloride) contaminant-plume evolution between FM-PRBs and IM-PRBs. In addition, model C1 can be utilized to design standard Bio-PRBs for real site of 1,1,1-TCA contanminated groundwater. To meet the safety standard of groundwater as potable water, the width of IM-PRBs needs to be increased by 24 cm. However, in FM-PRBs, the width needs to be increased by 42 cm. Therefore, IM-PRBs save costs significantly. This work has successfully used a model to optimize Bio-PRBs and to predict 1,1,1-TCA and daughter products contaminant-plume evolution in different Bio-PRBs.
Mostrar más [+] Menos [-]The influence of hydrogeological and anthropogenic variables on phthalate contamination in eogenetic karst groundwater systems
2018
Torres, Norma I. | Yu, Xue | Padilla, Ingrid Y. | Macchiavelli, Raul E. | Ghasemizadeh, Reza | Kaeli, David | Cordero, Jose F. | Meeker, John D. | Alshawabkeh, Akram N.
This study investigates the occurrence of six phthalates and distribution of the three most-detected phthalates in the karst region of northern Puerto Rico (KRNPR) using data from historical records and current field measurements. Statistical data analyses, including ANOVA, Chi-Square, and logistic regression models are used to examine the major factors affecting the presence and concentrations of phthalates in the KRNPR. The most detected phthalates include DEHP, DBP, and DEP. At least one phthalate specie is detected above DL in 7% of the samples and 24% of the sampling sites. Concentrations of total phthalates average 5.08 ± 1.37 μg L−1, and range from 0.093 to 58.4 μg L−1. The analysis shows extensive spatial and temporal presence of phthalates resulting from dispersed phthalate sources throughout the karst aquifers. Hydrogeological factors are significantly more important in predicting the presence and concentrations of phthalates in eogenetic karst aquifers than anthropogenic factors. Among the hydrogeological factors, time of detection and hydraulic conductivities larger than 300 m d−1 are the most influential factors. Persistent presence through time reflects continuous sources of phthalates entering the aquifers and a high capacity of the karst aquifers to store and slowly release contaminants for long periods of time. The influence of hydraulic conductivity reveals the importance of contaminant fate and transport mechanisms from contamination sources. This study improves the understanding of factors affecting the spatial variability and fate of phthalates in karst aquifers, and allows us to better predict their occurrence based on these factors.
Mostrar más [+] Menos [-]Experimental and numerical study on heavy metal contaminant migration and retention behavior of engineered barrier in tailings pond
2019
He, Yong | Li, Bing-bing | Zhang, Ke-neng | Li, Zhen | Chen, Yong-gui | Ye, Wei-min
Heavy metal pollution is a serious environmental problem globally, particularly in mines and tailings ponds. In this study, based on laboratory and field tests, the migration of heavy metal contaminants in a tailings pond and the retention behavior of a compacted bentonite engineered barrier system on the heavy metal contaminants were analyzed by a numerical simulation. The results demonstrate that the hydraulic conductivity of compacted bentonite is lower than that of the tailings from the laboratory tests. The hydraulic conductivity of the tailings sand decreased with an increase in the dry density and increased with an increase in the concentration of the chemical solution, which could be attributed to the large amounts of fine-grained soil contained in the tailings, according to the grain size distribution test. The hydraulic conductivity of the tailings from the engineering geological survey was between 2.0 × 10−6 and 9.0 × 10−5 m/s, and followed the order: tail coarse sand > tail silty sand > tail medium sand > tail fine silt. The numerical simulation of the seepage could satisfactorily describe the actual working condition of the tailings dam. With the groundwater seepage, the migration range of the heavy metal contaminant in the researched tailings pond reached a maximum of 45 m for 5 years. The retention efficiencies of the 0.2 m engineered barrier against the heavy metal contaminant for 15 and 30 years were 45.4% and 57.2%, respectively. Moreover, the retention efficiency would exceed 87% when the engineered barrier thickness is increased to 0.5 m. The results of model validation show that the calculated results are in good agreement with the measured ones. These findings can provide effective ideas for the prevention and control of environmental pollution in mines and tailings ponds.
Mostrar más [+] Menos [-]Chemical and anatomical changes in Liquidambar styraciflua L. xylem after long term exposure to elevated CO2
2015
Kim, Keonhee | Labbé, Nicole | Warren, Jeffrey M. | Elder, Thomas | Rials, Timothy G.
The anatomical and chemical characteristics of sweetgum were studied after 11 years of elevated CO2 (544 ppm, ambient at 391 ppm) exposure. Anatomically, branch xylem cells were larger for elevated CO2 trees, and the cell wall thickness was thinner. Chemically, elevated CO2 exposure did not impact the structural components of the stem wood, but non-structural components were significantly affected. Principal component analysis (PCA) was employed to detect differences between the CO2 treatments by considering numerous structural and chemical variables, as well as tree size, and data from previously published sources (i.e., root biomass, production and turnover). The PCA results indicated a clear separation between trees exposed to ambient and elevated CO2 conditions. Correlation loadings plots of the PCA revealed that stem structural components, ash, Ca, Mg, total phenolics, root biomass, production and turnover were the major responses that contribute to the separation between the elevated and ambient CO2 treated trees.
Mostrar más [+] Menos [-]Oil permeability variations on lagoon sand beaches in the Patos-Guaíba system in Rio Grande do Sul, Brazil
2017
Oliveira, Elaine Baroni | Nicolodi, João Luiz
Permeability is the ability of a sediment deposit to allow fluids to pass through it. It depends on the local types of sediments. When the fluid is oil, high permeability implies greater interaction with the site and more extensive damage, which makes recovery most difficult. Knowledge of permeability oscillations is necessary to understand oil behavior and improve cleanup techniques. The goal is to determine oil permeability variations on lagoon sand beaches. Oil permeability tests were performed at the beach face, using a Modified Phillip Dunne Permeameter and parameters were sampled. Permeability of lagoon beaches is driven by grain diameter and roundness, soil compaction, and depth of the water table. Factors that enhance permeability include: sand sorting, vertical distribution of sediments and gravel percentage. High permeability on lagoon beaches is related to polymodal distribution, to the sediment package, and to the system's low mobility.
Mostrar más [+] Menos [-]Hydraulic Capture Optimization and Risk Assessment of Polluted Groundwater Based on Kriging Surrogate Model
2022
Zhang, Shuangsheng | Qiang, Jing | Liu, Hanhu | Lv, Hongli | Wu, Jingwen | Zhou, Junjie
Building a hydraulic capture system through simulation–optimization methods has become an effective measure to control and eliminate groundwater pollution. However, there is a problem of large calculation load in the process of solving the simulation–optimization models, and the uncertainty of hydrogeological parameters is often not considered in the constructed models, which leads to some risks in the constructed hydraulic capture system. This paper proposed to use the hydraulic head differences at the boundary line of the pollution plume to constrain the groundwater flow direction to achieve pollutant capture, and proposed a hydraulic capture optimization system for the polluted groundwater based on the Kriging surrogate model. What is more, the hydraulic conductivity’s uncertainty was introduced into the simulation–optimization model, and a stochastic simulation–optimization model was constructed to evaluate the risk of the optimal scheme. The results of the case study showed that the Kriging surrogate model based on the optimal Latin hypercube sampling method can achieve a better replacement of the simulation model. Taking the hydraulic head differences at the boundary line of the pollution plume as a constraint can effectively control the groundwater flow direction. The optimal hydraulic capture system derived from the simulation–optimization model was two pumping wells, mainly concentrated downstream of the central axis of the pollution plume, and the scope of the capture zone was larger than that of the pollution plume. With the hydraulic conductivity following a log-normal distribution within the site, the optimal hydraulic capture scheme has a high-risk rate of 30.55%.
Mostrar más [+] Menos [-]Geotechnical properties of oil-polluted soil: a review
2022
Haghsheno, Hamed | Arabani, Mahyar
Soil polluted by oil and its derivatives is a critical environmental issue worldwide that jeopardizes ecological systems and causes geotechnical problems. This review paper focuses on the previous studies concerning the impacts of oil pollution on soil geotechnical properties. To this end, related academic literature on this topic was investigated and discussed. The findings of this study demonstrated that the addition of oil pollution in coarse-grained soils significantly reduces particle surface roughness. On the other hand, in fine-grained soils, it results in flocculation and secondary aggregation of clay particles, less aggregated and loose packing in the soil matrix, the formation of isometric pores, the formation of fissure-like pores, and an increase in mesoporosity. In general, it was found that the geotechnical properties of oil-polluted soils are mostly determined by the physicochemical and/or physical interactions between the soil and contaminant. Additionally, previous research has demonstrated that oil pollutants alter the geotechnical properties of cohesive and non-cohesive soils significantly, including the Atterberg limits, particle-size distribution, compaction behavior, unconfined compressive strength, friction angle, cohesion, hydraulic conductivity, and consolidation characteristics. However, no general pattern could be established for the majority of them. Besides, it was found that the degree of geotechnical property alteration of oil-polluted soil is strongly influenced by the soil type and features, as well as the quantity, type, and chemical composition of oil pollutants.
Mostrar más [+] Menos [-]Potential exploration of Fe3O4/biochar from sludge as the media of bioretention system and its comparison with conventional media
2022
Zhou, Jiaying | Fan, Xiaodan | Zhang, Daohong | Tang, Yinbing | Wang, Xueqi | Yuan, Zhengtong | Zhang, Hao | Zhang, Jinxuan
The selection and configuration of soil media are a core issue of the bioretention system. A porous carbon material of Fe₃O₄/biochar (BSF) was prepared by adding pickling wastewater to modified sludge biochar, which could serve as a good adsorption performance and cheap media for bioretention system. Through the analytic hierarchy process (AHP), different media were evaluated according to their characteristics. By comparing the characteristics of BSF to bio-ceramic (BC), zeolite (ZE), and activated carbon (AC), it was found that BSF has a larger specific surface area and pore volume. The hydrological characteristics of the medium were also tested. The results show that BSF has better water-absorbing quality and hydraulic conductivity than the other three media, but the water-retention property of the medium seems to be inferior. BSF has stable adsorption performance for ammonia nitrogen (NH₄⁺-N) and total phosphorus (TP) in rainwater. Its high adsorption capacity is maintained at 5–35°C, but it is very susceptible to pH factors. The adsorption process by BSF and other media conforms to pseudo-second-order kinetics and the Langmuir model in rainwater. In general, the performance of BSF is shown to be superior to BC, ZE, and AC, making it a potential medium for bioretention system.
Mostrar más [+] Menos [-]