A recently identified chemical, 2-((4-Methylpentan-2-yl)amino)-5-(phenylamino)cyclohexa-2,5-diene-1,4-dione (6PPD-quinone; 6PPD-Q), is a transformation product of an additive used in the manufacture of tire rubber and causes acute lethality in coho salmon (Oncorhynchus kisutch) in urban watersheds. Despite its potential presence and ecotoxicity in receiving waters worldwide, information on the occurrence and fate of 6PPD-Q is limited. Here, we investigated the concentrations of 6PPD-Q and its parent chemical, 6PPD, in road dust collected from arterial and residential roads in Tokyo, Japan from May to October 2021. 6PPD-Q concentrations were highest from May to June, when atmospheric ozone concentrations are the highest in Japan; a correlation between 6PPD-Q and photochemical oxidants, as an alternative to ozone, corroborated this finding. We also found that 6PPD-Q concentrations at photochemical oxidant concentrations ranging from 35 to 47 ppbv were higher in dust collected from roads with high traffic volumes (i.e., arterial roads; median: 8.6 μg/g-OC) than in dust collected from roads with lower traffic volumes (i.e., residential roads; median: 6.3 μg/g-OC), indicating that 6PPD-Q is generated from traffic-related sources. We also found that 6PPD-Q was leached from dust particles within a few hours, with a log partitioning coefficient between organic carbon and water (KOC) of 3.2–3.5. The present results will help to understand the environmental occurrence, fate, and behavior of 6PPD-Q.

Bisphenol A (BPA) is a ubiquitous environmental pollutant, mainly from the manufacture and use of plastics. The use of BPA is restricted, and its new analogs (including bisphenol AF, BPAF) are being produced to replace it. However, the effect of BPAF on the male reproductive system remains unclear. Here, we report the effect of BPAF on Leydig cell regeneration in rats. Leydig cells were eliminated by ethane dimethane sulfonate (EDS, i.p., 75 mg/kg) and the regeneration began 14 days after its treatment. We gavaged 0, 10, 100, and 200 mg/kg BPAF to rats on post-EDS day 7–28. BPAF significantly reduced serum testosterone and progesterone levels at ≧10 mg/kg. It markedly reduced serum levels of estradiol, luteinizing hormone, and follicle-stimulating hormone at 100 and 200 mg/kg. BPAF significantly reduced Leydig cell number at 200 mg/kg. BPAF significantly down-regulated the expression of Cyp17a1 at doses of 10 mg/kg and higher and the expression of Insl3, Star, Hsd17b3, Hsd11b1 in Leydig cells at 100 and 200 mg/kg, while it induced a significant up-regulation of Fshr, Dhh, and Sox9 in Sertoli cells at 200 mg/kg. BPAF induced oxidative stress and reduced the level of SOD2 at 200 mg/kg. It induced apoptosis and autophagy by increasing the levels of BAX, LC3B, and BECLIN1 and lowering the levels of BCL2 and p62 at 100 and 200 mg/kg. It induced autophagy possibly via decreasing the phosphorylation of AKT1 and mTOR. BPAF also significantly induced ROS production and apoptosis at a concentration of 10 μM, and reduced testosterone synthesis in rat R2C Leydig cells at a concentration of 10 μM in vitro, but did not affect cell viability after 24 h of treatment. In conclusion, BPAF is a novel endocrine disruptor, inhibiting the regeneration of Leydig cells.

A vast amount of evidence indicates that bisphenol A (BPA) and phthalates are widely distributed in the environment since these compounds are mass-produced for the manufacture of plastics and plasticizers. These compounds belong to a large group of substances termed endocrine-disrupting chemicals (EDC). It is well known that humans and living organisms are unavoidably and unintentionally exposed to BPA and phthalates from food packaging materials and many other everyday products. BPA and phthalates exert their effect by interfering with hormone synthesis, bioavailability, and action, thereby altering cellular proliferation and differentiation, tissue development, and the regulation of several physiological processes. In fact, these EDC can alter fetal programming at an epigenetic level, which can be transgenerational transmitted and may be involved in the development of various chronic pathologies later in the adulthood, including metabolic, reproductive and degenerative diseases, and certain types of cancer.In this review, we describe the most recent proposed mechanisms of action of these EDC and offer a compelling selection of experimental, epidemiological and clinical studies, which show evidence of how exposure to these pollutants affects our health during development, and their association with a wide range of reproductive, metabolic and neurological diseases, as well as hormone-related cancers. We stress the importance of concern in the general population and the urgent need for the medical health care system to closely monitor EDC levels in the population due to unavoidable and involuntary exposure to these pollutants and their impact on human health.

Large amounts of wastewater discharge have emerged as a burden in the process of industrialization and urbanization. In this study, a dynamic wastewater-induced input-output model is developed to systematically analyze the related situation. The developed model is applied to Guangdong Province, China to analyze its prominent characteristics from 2002 to 2015. Combining input-output analysis, ecological network analysis and structural decomposition analysis, the developed model reveals issues of direct and indirect discharges, relationships among various discharges, and driving forces of wastewater discharges. It is uncovered that Primary Manufacturing and Advanced Manufacturing dominate the system because of significant temporal and spatial variations in wastewater discharge. In addition, Manufacturing of paper, computer and machinery and Services are the key industries responsible for large amounts of wastewater discharge and unhealthy source-discharge relationships. The largest wastewater discharge occurred in 2005 and indirect wastewater discharge is the main form. Furthermore, final demand is found to be the biggest driving force of wastewater discharge. Finally, a three-phase policy implementation system implemented in stages proposes solutions to wastewater problems.

As a strong reductant and highly active alkali, hydrazine (N2H4) has been widely used in chemical industry, pharmaceutical manufacturing and agricultural production. However, its high acute toxicity poses a threat to ecosystem and human health. In the present study, a ratiometric fluorescent probe for the detection of N2H4 was designed, utilizing dicyanoisophorone as the fluorescent group and 4-bromobutyryl moiety as the recognition site. 4-(2-(3-(dicyanomethylene)-5,5-dimethylcyclohex-1-enyl) phenyl 4-brobutanoate (DDPB) was readily synthesized and could specially sense N2H4 via an intramolecular charge transfer (ICT) pathway. The cyclization cleavage reaction of N2H4 with a 4-bromobutyryl group released phenolic hydroxyl group and reversed the ICT process between hydroxy group and fluorophore, turning on the fluorescence in the DDPB-N2H4 complexes. DDPB exhibits a low cytotoxicity, reasonable cell permeability, a large Stokes shift (186 nm) and a low detection limit (86.3 nM). The quantitative determination of environmental water systems and the visualization fluorescence of DDPB test strips provides a strong evidence for the applications of DDPB. In addition, DDPB is suitable for the fluorescence imaging of exogenous N2H4 in HeLa cells and zebrafish.

Concrete, a cement-based product is the highest manufactured and second highest consumed product after water on earth. Across the world, production of cement is the most energy and emission intensive industry hence, the cement industry is currently under pressure to reduce greenhouse gases emissions (GHGEs). However, reducing the GHGEs of the cement industry especially for developing country like India is not an easy task. Cement manufacturing industry needs to focus on significant climate change mitigation strategies to reduce the GHGEs to sustain its production. This study aims at identifying significant climate change mitigation strategies of the cement manufacturing industry in the context of India. Extant literature review and expert opinion are used to identify climate change mitigation strategies of the cement manufacturing industry. In the present study, a model projects by applying both AHP and DEMATEL techniques to assess the climate change mitigation strategies of the cement industry. The AHP technique help in establishing the priorities of climate change mitigation strategies, while the DEMATEL technique forms the causal relationships among them. Through AHP, the results of this research demonstrate that Fuel emission reduction is on top most priority while the relative importance priority of the main remaining factors is Process emission reduction - Electric energy-related emission - Emission avoidance and reduction - Management mitigation measures. The findings also indicate that the main factors, Process emission reduction, and Fuel emission reduction are categorized in cause group factors, while the remaining factors, Electric energy-related emission, Emission avoidance and reduction and Management mitigation measures are in effect group factors. Present model will help supply chain analysts to develop both short-term and long-term decisive measures for effectively managing and reducing GHGEs.

The Minamata Convention entered into force in 2017 with the aim to phase-out the use of mercury (Hg) in manufacturing processes such as the chlor-alkali or vinyl chloride monomer production. However, past industrial use of Hg had already resulted in extensive soil pollution, which poses a potential environmental threat. We investigated the emission of gaseous elemental mercury (Hg0) from Hg polluted soils in settlement areas in the canton of Valais, Switzerland, and its impact on local air Hg concentrations. Most soil Hg was found as soil matrix-bound divalent Hg (HgII). Elemental mercury (Hg0) was undetectable in soils, yet we observed substantial Hg0 emission (20–1392 ng m−2 h−1) from 27 soil plots contaminated with Hg (0.2–390 mg Hg kg−1). The emissions of Hg0 were calculated for 1274 parcels covering an area of 8.6 km2 of which 12% exceeded the Swiss soil remediation threshold of 2 mg Hg kg−1. The annual Hg0 emission from this area was approximately 6 kg a−1, which is almost 1% of the total atmospheric Hg emissions in Switzerland based on emission inventory estimates. Our results show a higher abundance of Hg resistance genes (merA) in soil microbial communities with increasing soil Hg concentrations, indicating that biotic reduction of HgII is likely an important pathway to form volatile Hg0 in these soils. The total soil Hg pool in the top 20 cm of the investigated area was 4288 kg; hence, if not remediated, these contaminated soils remain a long-term source of atmospheric Hg, which is prone to long-range atmospheric transport.

The objective of this study is to investigate the qualitative contribution of internal and external factors of the area contaminated by polystyrene (PS) in coastal marine environments. This study is based on the extensive results of monitoring the styrene oligomers (SOs) present in sand and seawater samples along various coastlines of the Pacific Ocean. Here, anthropogenic SOs is derived from PS during manufacture and use, and can provide clues about the origin of SOs by PS pollution. The monitoring results showed that, if the concentration of SOs in water is higher than those concentrations in beach sand, this area could be affected by PS plastic caused by an external factor. On the other hand, if the concentration of SOs is higher in the beach sand, the region can be mainly influenced by PS plastic derived from its own area. Unlike the case of an external factor, in this case (internal influence), it is possible to take policy measures of the area itself for the PS plastic problem. Thus, this study is motivated by the need of policy measures to establish a specific alternative to the problems of PS plastic pollution in ocean environments.

Polybrominated diphenyl ethers (PBDEs) are widely used as flame retardants for various products and have become ubiquitous pollutants in environmental media. However, little is known about PBDE levels in Shenzhen, a manufacturing center of electronic products. This study aimed to investigate spatiotemporal variability of PBDE concentration in atmospheric fine particles (PM2.5) and to estimate the daily inhalation exposure doses for local residents in Shenzhen, China. A total of 36 samples were collected and 8 PBDE compounds (BDE-28, 47, 99, 100, 153, 154, 183 and 209) were analyzed by isotope dilution high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS). Mean concentrations of Σ8PBDEs and BDE-209 in PM2.5 in Shenzhen were 33.47 pg/m3 and 24.75 pg/m3, respectively, which were lower than those for other reported cities from China. The mean concentration of Σ8PBDEs was higher in the winter + spring than that in summer + autumn, and both concentrations of BDE-28 and BDE-47 in PM2.5 were significantly higher in winter + spring than those in summer + autumn. Among the 8 congeners, BDE-209 was predominant, accounting for 73.9% of the Σ8PBDEs concentrations. Traffic area, industrial area, residential area and discharge of electronic industries had significant positive influences on PBDE concentrations in PM2.5. Both vegetation area and water area were significantly negatively correlated with PBDE levels in PM2.5. Significantly negative correlation was also found between PBDE concentrations in PM2.5 and the relative humidity. The ranking of estimated inhalation exposure doses of PBDEs via PM2.5 inhalation were toddlers (1.74 pg/kg b.w./day) > children (1.33 pg/kg b.w./day) > adults (1.26 pg/kg b.w./day) > teenagers (0.64 pg/kg b.w./day), and toddlers had a highest risk to expose to PBDEs by PM2.5. To our knowledge, the present study is the first to reveal the spatiotemporal variability of PBDEs in PM2.5 of Shenzhen, China.

Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals’ exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation.