Refinar búsqueda
Resultados 1-10 de 58
Vertical profile of aerosols in the Himalayas revealed by lidar: New insights into their seasonal/diurnal patterns, sources, and transport
2021
Xiang, Yan | Zhang, Tianshu | Liu, Jianguo | Wan, Xin | Loewen, Mark | Chen, Xintong | Kang, Shichang | Fu, Yibin | Lv, Lihui | Liu, Wenqing | Cong, Zhiyuan
Atmospheric aerosols play a crucial role in climate change, especially in the Himalayas and Tibetan Plateau. Here, we present the seasonal and diurnal characteristics of aerosol vertical profiles measured using a Mie lidar, along with surface black carbon (BC) measurements, at Mt. Qomolangma (QOMS), in the central Himalayas, in 2018–2019. Lidar-retrieved profiles of aerosols showed a distinct seasonal pattern of aerosol loading (aerosol extinction coefficient, AEC), with a maximum in the pre-monsoon (19.8 ± 22.7 Mm⁻¹ of AEC) and minimum in the summer monsoon (7.0 ± 11.2 Mm⁻¹ of AEC) seasons. The diurnal variation characteristics of AEC and BC were quite different in the non-monsoon seasons with enriched aerosols being maintained from 00:00 to 10:00 in the pre-monsoon season. The major aerosol types at QOMS were identified as background, pollution, and dust aerosols, especially during the pre-monsoon season. The occurrence of pollution events influenced the vertical distribution, seasonal/diurnal patterns, and types of aerosols. Source contribution of BC based on the weather research and forecasting chemical model showed that approximately 64.2% ± 17.0% of BC at the QOMS originated from India and Nepal in South Asia during the non-monsoon seasons, whereas approximately 47.7% was from local emission sources in monsoon season. In particular, the high abundance of BC at the QOMS in the pre-monsoon season was attributed to biomass burning, whereas anthropogenic emissions were the likely sources during the other seasons. The maximum aerosol concentration appeared in the near-surface layer (approximately 4.3 km ASL), and high concentrations of transported aerosols were mainly found at 4.98, 4.58, 4.74, and 4.88 km ASL in the pre-monsoon, monsoon, post-monsoon, and winter seasons, respectively. The investigation of the vertical profiles of aerosols at the QOMS can help verify the representation of aerosols in the air quality model and satellite products and regulate the anthropogenic disturbance over the Tibetan Plateau.
Mostrar más [+] Menos [-]Source identification of atmospheric particle-bound mercury in the Himalayan foothills through non-isotopic and isotope analyses
2021
Guo, Junming | Sharma, Chhatra Mani | Tripathee, Lekhendra | Kang, Shichang | Fu, Xuewu | Huang, Jie | Shrestha, Kundan Lal | Chen, Pengfei
This study reports on the sources of atmospheric particle-bound mercury (HgP) in less studied regions of Nepal based on the analysis of stable mercury (Hg) isotopes in aerosol samples from two neighboring areas with high and low anthropogenic emissions (Kathmandu and Dhulikhel, respectively) during 2018. Although the Indian monsoon and westerlies are generally regarded as the primary carriers of pollutants to this region via the heavily industrialized Indo-Gangetic Plain, the concentrations of total suspended particles (TSP) and HgP in Kathmandu were higher than those in Dhulikhel, thus suggesting a substantial contribution from local sources. Both isotopic (δ²⁰⁰Hg and Δ¹⁹⁹Hg) and non-isotopic evidence indicated that dust, waste burning, and industrial byproducts (without Hg amalgamation) were the major sources of Hg in Kathmandu during the study period. Mercury may have been transported via air masses from Kathmandu to Dhulikhel, as indicated by the similar organic carbon/elemental carbon ratios and seasonal trends of TSP and HgP in these two locations. Local anthropogenic sources were found to contribute significantly to atmospheric Hg pollution through dust resuspension. Therefore, dust resuspension should be considered when evaluating the long-range transport of air pollutants such as Hg, particularly in anthropogenically stressed areas.
Mostrar más [+] Menos [-]Light absorption properties of elemental carbon (EC) and water-soluble brown carbon (WS–BrC) in the Kathmandu Valley, Nepal: A 5-year study
2020
Chen, Pengfei | Kang, Shichang | Tripathee, Lekhendra | Ram, Kirpa | Rupakheti, Maheswar | Panday, Arnico K. | Zhang, Qianggong | Guo, Junming | Wang, Xiaoxiang | Pu, Tao | Li, Yizhong
This study presents a comprehensive analysis of organic carbon (OC), elemental carbon (EC), and particularly the light absorption characteristics of EC and water-soluble brown carbon (WS–BrC) in total suspended particles in the Kathmandu Valley from April 2013 to January 2018. The mean OC, EC, and water-soluble organic carbon (WSOC) concentrations were 34.8 ± 27.1, 9.9 ± 5.8, and 17.4 ± 12.5 μg m⁻³, respectively. A clear seasonal variation was observed for all carbonaceous components with higher concentrations occurring during colder months and lower concentrations in the monsoon season. The relatively low OC/EC ratio (3.6 ± 2.0) indicates fossil fuel combustion as the primary source of carbonaceous components. The optical attenuation (ATN) at 632 nm was significantly connected with EC loading (ECS) below 15 μg cm⁻² but ceased as ECS increased, reflecting the increased influence of the shadowing effect. The derived average mass absorption cross-section of EC (MACEC) (7.0 ± 4.2 m² g⁻¹) is comparable to that of freshly emitted EC particles, further attesting that EC was mainly produced from local sources with minimal atmospheric aging processes. Relatively intensive coating with organic aerosols and/or salts (e.g., sulfate, nitrate) was probably the reason for the slightly higher MACEC during the monsoon season, whereas increased biomass burning was a major factor leading to lower MACEC in other seasons. The average MACWS₋BᵣC at 365 nm was 1.4 ± 0.3 m² g⁻¹ with minimal seasonal variations. In contrast to MACEC, biomass burning was the main reason for a higher MACWS₋BᵣC in the non-monsoon season. The relative light absorption contribution of WS-BrC to EC was 9.9% over the 300–700 nm wavelength range, with a slightly higher ratio (13.6%) in the pre-monsoon season. Therefore, both EC and WS-BrC should be considered in the study of optical properties and radiative forcing of carbonaceous aerosols in this region.
Mostrar más [+] Menos [-]Improved method to apportion optical absorption by black and brown carbon under the influence of haze and fog at Lumbini, Nepal, on the Indo-Gangetic Plains
2020
Izhar, Saifi | Gupta, Tarun | Panday, Arnico K.
Estimates of the brown carbon (BrC) absorption and their contribution to light absorption in ambient aerosols are poorly understood. The existing approaches to apportion light absorption into black carbon (BC) and BrC mainly use the assumption of fixed angstrom absorption exponent (AAE) for BC (1.0), which is not always true for ambient aerosols. Besides, these estimates are seldom validated, leaving significant uncertainty with derived values. Also, BrC absorption studies are largely focused on aqueous extracts, which truly do not represent the aerosolized form, hence the relationship between aqueous extracts and aerosolized form is a subject of research. With this in mind, we collected ambient PM₂.₅ filter samples at Lumbini, Nepal, at the northern edge of the Indo-Gangetic Plains (IGP) during winter 2017-18. These samples were analyzed for different compositions of carbonaceous aerosol and optical properties. BC and BrC absorptions were derived using a preexisting simplified two-component model but with “improved conditions”. Although BC dominated spectral absorption, BrC contribution for the carbonaceous aerosol absorption increased substantially at ultraviolet wavelengths (example 14.8–53.6% at 365 nm). Further water-soluble BrC absorption value in aerosol was found to be higher by 1.8 times to that obtained in aqueous extracts. Water-soluble OC contributed ∼65% to OC loading and 50% to BrC absorption at 365 nm, indicated the equally important role of water-insoluble organics. Mass absorption efficiency (MAE) of water-soluble BrC in aerosol was found to be 1.7 m²/g, lower to water-insoluble by 2.2 times. High BC MAE was observed which showed positive dependence on secondary coating. Sample collected during events with fog droplets showed a reduction in carbonaceous components loading and light absorption but enhancement in MAE for BrC and BC, signifying that aqueous processing can significantly modify the aerosol optical properties.
Mostrar más [+] Menos [-]Determination of dry deposition velocity of polycyclic aromatic hydrocarbons under the sub-tropical climate and its implication for regional cycling
2020
Dotel, Jagdish | Gong, Ping | Wang, Xiaoping | Pokhrel, Balram | Wang, Chuanfei | Nawab, Javed
Atmospheric dry deposition is a major pathway for removal of polycyclic aromatic hydrocarbons (PAHs) from the atmosphere. Despite its significance in the atmospheric environment, measurements of the dry deposition velocity (VDD) and deposition fluxes (FDD) of PAHs are relatively limited. In this study, a passive dry deposition (PAS-DD) collector was co-deployed with passive air sampler polyurethane foam (PAS-PUF) from November 2015 to November 2016 in two major cities (Kathmandu and Pokhara), Nepal, to investigate the VDD and FDD of PAHs. The VDD of PAHs ranged from 0.25 to 0.5 cm s⁻¹ and the annual average was recorded as 0.37 ± 0.08 cm s⁻¹. On the basis of measured VDD, the FDD of ∑15PAHs in Kathmandu and Pokhara were estimated as 66 and 5 kg yr⁻¹ respectively. According to the measured VDD of Kathmandu and Pokhara in this study, and the previously published VDD data of Toronto, Canada, where the same PAS-DD collector was used, a significant multi-linear correlation (r² = 0.79, p < 0.05) was found between VDD of higher molecular weight (HMW with MW ≥ 228.3 and ≥ 4 rings) PAHs and meteorological parameters (precipitation and wind speed) and vapor pressure of PAHs. To the best of our knowledge, this enabled the development of an empirical model that can exhibit the combined effects of meteorological conditions on the VDD of HMW PAHs. The model was used to estimate the VDD values for major cities in the Indo-Gangetic Plain (IGP) region and the maximum estimated proportion of HMW PAHs deposited by dry deposition reached up to 60% of total emissions. Although PAH emissions in the IGP region pose global risks, the results of this study highlight the considerable risk for local IGP residents, due to the large dry deposition proportion of HMW PAHs.
Mostrar más [+] Menos [-]Influence of open vegetation fires on black carbon and ozone variability in the southern Himalayas (NCO-P, 5079 m a.s.l.)
2014
Putero, D. | Landi, T.C. | Cristofanelli, P. | Marinoni, A. | Laj, P. | Duchi, R. | Calzolari, F. | Verza, G.P. | Bonasoni, P.
We analysed the variability of equivalent black carbon (BC) and ozone (O3) at the global WMO/GAW station Nepal Climate Observatory-Pyramid (NCO-P, 5079 m a.s.l.) in the southern Himalayas, for evaluating the possible contribution of open vegetation fires to the variability of these short-lived climate forcers/pollutants (SLCF/SLCP) in the Himalayan region.We found that 162 days (9% of the data-set) were characterised by acute pollution events with enhanced BC and O3 in respect to the climatological values. By using satellite observations (MODIS fire products and the USGS Land Use Cover Characterization) and air mass back-trajectories, we deduced that 56% of these events were likely to be affected by emissions from open fires along the Himalayas foothills, the Indian Subcontinent and the Northern Indo-Gangetic Plain.These results suggest that open fire emissions are likely to play an important role in modulating seasonal and inter-annual BC and O3 variability over south Himalayas.
Mostrar más [+] Menos [-]Wintertime chemical characteristics of aerosol and their role in light extinction during clear and polluted days in rural Indo Gangetic plain
2021
Izhar, Saifi | Gupta, Tarun | Qadri, Adnan Mateen | Panday, Arnico K.
This paper reports the chemical and light extinction characteristics of fine aerosol (PM₂.₅) during the winter period (2017–18) at Lumbini, Nepal, a rural site on the Indo Gangetic Plains. A modified IMPROVE algorithm was employed to reconstruct light extinction by chemical constituents of aerosol. The fine aerosol levels impacted visibility adversely during daytime, but during nighttime visibility was controlled by fog droplets rather than by aerosols. The PM₂.₅ chemical constituents showed varying characteristics during clear and polluted days. The average NO₃⁻/SO₄²⁻ concentration ratio was 0.57 during clear and 1.36 and polluted days, signifying a change in secondary inorganics and formation processes mainly due to decreasing photochemical production and due to increased partitioning of nitrate particles at a lower temperature. The increased secondary organics contribution and the higher OM/OC ratio (2.2) during polluted days showed the vital role of aqueous processing and biomass burning emissions in determining the concentration of organics. Total light extinction was 2.3 times higher on polluted days compared to clear days, while the PM₂.₅ mass concentration was 1.5 times higher. This variation in mass and extinction order signifies that various chemical components in fine particles have a more considerable impact on light extinction. On clear days we found that carbonaceous particles (OM and EC) made a major contribution to light extinction. In contrast, the extinction contribution by secondary inorganic (especially NH₄NO₃) increased significantly during polluted days, with hygroscopic growth and enhanced scattering efficiency at higher RH conditions playing a major role. The comparison between clear and polluted days altogether suggests that regulating the nitrate sources can help significantly in improving the visibility levels and restrict fog haze development during wintertime in rural IGP.
Mostrar más [+] Menos [-]Inter-annual and seasonal variations in columnar aerosol characteristics and radiative effects over the Pokhara Valley in the Himalayan foothills – Composition, radiative forcing, and atmospheric heating
2020
Ramachandran, S. | Rupakheti, M.
This study reports comprehensive analysis of seasonal and inter-annual variations of aerosol properties (optical, physical and chemical) and radiative effects over Pokhara Valley in the foothills of central Himalayas in Nepal utilizing the high-quality multi-year columnar aerosol data observed recently from January 2010 to December 2017. This paper focusses on the seasonal and inter-annual variations of chemical (composition), and absorption properties of aerosols and their radiative effects. The single scattering albedo (SSA) either decreases as a function of wavelength or remains independent of wavelength. The seasonal mean aerosol absorption optical depth (AAOD) exhibits a behavior opposite to that of SSA. Carbonaceous aerosols (CA) dominate (≥60%) aerosol absorption during the whole year. Black carbon (BC) alone contributes >60% to AAODCA while brown carbon (BrC) shares the rest. The absorbing aerosol types are determined to be BC, and mixed (BC and dust) only. Dust as absorbing aerosol type is absent over the Himalayan foothills. The ARFSFC is ≥ -50 Wm⁻² except in monsoon almost every year. The ARFATM is ≥ 50 Wm⁻² during winter and pre-monsoon in all the years. ARFESFC, ARFETOA and ARFEATM follow a similar pattern as that of ARF. High values of ARFE at SFC, TOA and ATM (except during monsoon when values are slightly lower) suggest that aerosols are efficient in significantly modulating the incoming solar flux throughout the year. The annual average aerosol-induced atmospheric heating rate (HR) over Pokhara is nearly 1 K day⁻¹ every year during 8-year observation, and is highest in 2015 (∼2.5 K day⁻¹). The HR is about 1 K day⁻¹ or more over all the locations in IGP during the year. These quantitative results can be used as inputs in global/regional climate models to assess the climate impact of aerosols, including on regional temperature, hydrological cycle and melting of glaciers and snowfields in the region.
Mostrar más [+] Menos [-]Occurrence and characteristics of microplastics in surface road dust in Kusatsu (Japan), Da Nang (Vietnam), and Kathmandu (Nepal)
2020
Yukioka, Satoru | Tanaka, Shuhei | Nabetani, Yoshiki | Suzuki, Yuji | Ushijima, Taishi | Fujii, Shigeo | Takada, Hideshige | Van Tran, Quang | Singh, Sangeeta
Microplastics (MPs, plastics < 5 mm) are a growing concern in ecosystems, being found in the soil and water environment. One of the primary sources of MPs has been suspected to be road dust in urban areas as it can flow into waters with runoff. To understand the occurrence of MPs (100 μm–5 mm) in surface road dust of three cities (Kusatsu, Shiga, Japan; Da Nang, Vietnam; and Kathmandu, Nepal), we collected surface road dust samples. The samples were pretreated (organic matter decomposition and gravity separation), and all MP candidates were individually observed by microscope for color, shape, and size; and analyzed their polymer types using fourier transform infrared spectrometry. The abundances of MPs 100 μm to 5 mm in size were 2.0 ± 1.6 pieces/m2 (13 polymer types) in Kusatsu, 19.7 ± 13.7 pieces/m2 in Da Nang (14 types), and 12.5 ± 10.1 pieces/m2 in Kathmandu (15 types). We classified the MPs into two groups; containers/packaging-MPs and rubber-MPs. Among all MPs, the containers/packaging-MPs accounted for 55 ± 5% of the polymer types composition. In contrast, the rubber-MPs accounted for 16 ± 6% of all MPs which were higher than those previously published for environmental water and sediment samples. The containers/packaging-MPs were fragments of various colors while most of the rubber-MPs were fragments or granules in black. The number–size distributions of MPs showed that the mode of formation explains the differences between their polymer types (tearing for containers/packaging-MPs and abrasion for rubber-MPs). In Da Nang and Kathmandu, the abundance of containers/packaging-MPs and rubber-MPs were correlated so that those MPs might be micronized from the originated materials in the sources with the similar composition (e.g. dump points). It was indicated that the characteristics of MPs pollution in surface road dust might be different depending on waste management practices.
Mostrar más [+] Menos [-]Occurrence and fate of organophosphate ester flame retardants and plasticizers in indoor air and dust of Nepal: Implication for human exposure
2017
Yadav, Ishwar Chandra | Devi, Ningombam Linthoingambi | Zhong, Guangcai | Li, Jun | Zhang, Gan | Covaci, Adrian
The present study was carried out in Nepal, a landlocked country located between world's two most populous countries i.e. India and China. In this study, the occurrence, profiles, spatial distributions and fate of eight organophosphate ester flame retardants (OPFRs) were investigated in indoor air and house dust. Overall, the concentrations of ∑OPFR were in the range of 153–12100 ng/g (median732 ng/g) and 0.32–64 ng/m3 (median 5.2 ng/m3) in house dust and indoor air, respectively. The sources of high OPFR in the indoor environment could be from locally used wide variety of consumer products and building materials in Nepalese houses. Significantly, high concentration of tri-cresyl phosphate (TMPP) was found both in air and dust, while tri (2-ethylhexyl) phosphate (TEHP) had the highest concentration in air samples. It might be due to fact that the high concentrations of TMPP are related to intense traffic and/or nearby airports. On the other hand, significantly high concentration of TEHP could be due to anthropogenic activities. Only TEHP showed positive correlation between indoor air and house dust (Rho = 0.517, p < 0.01), while rest of compounds were either less correlated or not correlated at all. The estimated human exposure to ∑OPFR via different pathway of intake suggested dermal absorption via indoor dust as major pathway of human exposure to both children and adult population. However, other pathways of OPFR intake such as dietary or dermal absorption via soil may still be significant in case of Nepal.
Mostrar más [+] Menos [-]