This paper presents concentrations and sources of Aliphatic and Aromatic Hydrocarbons in the sediments from Babolsar coastal area and the inlet of Babolrood River in the southern side of the Caspian Sea. The concentration of hydrocarbons in 13 sediment samples from the study area were measured by gas chromatography (GC). Total Petroleum Hydrocarbon (TPH) concentrations in sediment samples in the coastal area ranged from 115 to 201 μg/g. In the inlet samples, TPH concentrations were close to each other and ranged from 294 to 367 μg/g. The TPH results showed moderate level of oil pollution in the study area. Total Polycyclic Aromatic Hydrocarbons (ΣPAHs) concentrations in sediment samples inside the inlet ranged from 498 to 702 ng/g, indicating moderate level of pollution. Concentrations of ΣPAHs in sediment samples in the coastal area ranged from 341 to 1703 ng/g, indicating moderate to less than significant level of pollution. Developed indices for pollutant origins showed that hydrocarbons in all sediment samples collected in the study area had petrogenic origin. The results also showed the Babolrood River as the main source of oil pollution in the sediments in the study area.

Kharg Island in the Persian Gulf is the place for the major oil export terminals of Iran and hosts several large oil related industries. Coastal environment of the Kharg Island is rich in coral reefs. This paper presents concentrations and sources of aliphatic and aromatic hydrocarbons in the sediments from the coastal area of the island. The concentration of hydrocarbons in 14 seabed sediment samples from water depths of 13-20 m around the island were measured by gas chromatography (GC). Total Petroleum Hydrocarbon (TPH) concentrations in sediment samples ranged from less than 1 to 133 μg/g indicating low to moderate levels of oil pollution. Spatial distributions of TPH concentrations indicated no oil pollution in the southern part of the island, higher oil pollution levels near oil terminals and correlation with fine particles. Total Polycyclic Aromatic Hydrocarbons (∑PAHs) concentrations in sediment samples ranged from near zero to 6210 ng/g, indicating non to highly, but mainly moderately polluted levels. SPAHs concentrations, except at one station, were all less than the NOAA sediment quality guideline value for the effects range low. Developed indices for pollutant origins showed that hydrocarbons in all sediment samples collected in the study area had petrogenic origin. The results also indicated that the emissions from gas flares in the island were the main source of aromatic compounds in the sediment samples.

peer reviewed | Contaminated land burdens the economy of many countries and must be dealt with. Researchers have published thousands of documents studying and developing soil and sediment remediation treatments. Amongst the targeted pollutants are the polycyclic aromatic hydrocarbons (PAHs), described as a class of persistent organic compounds, potentially harmful to ecosystems and living organisms. The present paper reviews and discusses three scientific trends that are leading current PAH-contaminated soil/sediment remediation studies and management. First, the choice of compounds that are being studied and targeted in the scientific literature is discussed, and we suggest that the classical 16 US-EPA PAH compounds might no longer be sufficient to meet current environmental challenges. Second, we discuss the choice of experimental material in remediation studies. Using bibliometric measures, we show the lack of PAH remediation trials based on co-contaminated or aged-contaminated material. Finally, the systematic use of the recently validated bioavailability measurement protocol (ISO/TS 16751) in remediation trials is discussed, and we suggest it should be implemented as a tool to improve remediation processes and management strategies.

International audience | An original combined organic geochemistry and soil science approach was used to elucidate PAH availability controlling factors in a multi-contaminated industrial soil. Water granulodensimetric fractionation was applied to obtain five water-stable material fractions. These were characterized by elemental, molecular and mineral analysis, and microscopic observations. Among the different fractions, fine silts distinguished themselves by higher carbon and nitrogen contents, lower C/N ratio, an enrichment in total PAH and especially high molecular weight compounds, a coal tar signature and the lowest PAH availability. This fine silt fraction seemed to play a protective role for PAH that might be explained by its size and/or its specific reactivity. The mineral phases present in this fraction were proposed to explain the protection of organic matter. This led to a specific molecular signature of OM, having higher sorption properties both processes (sorption and mineral-bound protection) resulting in a lower PAH availability. (C) 2013 Elsevier Ltd. All rights reserved.

International audience | Although high PAH content and detection of PAH-degraders, the PAH biodegradation is limited in aged-contaminated soils due to low PAR availability (i.e., 1%). Here, we tried to experimentally increase the soil PAH availability by keeping both soil properties and contamination composition. Organic extract was first removed and then re-incorporated in the raw soil as fresh contaminants. Though drastic, this procedure only allowed a 6-time increase in the PAH availability suggesting that the organic constituents more than ageing were responsible for low availability. In the re-contaminated soil, the mineralization rate was twice more important, the proportion of 5-6 cycles PAH was higher indicating a preferential degradation of lower molecular weight PAH. The extraction treatment induced bacterial and fungal community structures modifications, Pseudomonas and Fusarium solani species were favoured, and the relative quantity of fungi increased. In re-contaminated soil the percentage of PAH-dioxygenase gene increased, with 10 times more Gram negative representatives.

peer reviewed | Polycyclic aromatic hydrocarbons (PAH) are persistent organic compounds of major concern that accumulate in the environment, especially soils, and require remediation. Researches to develop bioremediation and phytoremediation (alternative eco-friendly technologies) are being conducted. First, a bioaccessibility measurement protocol was adapted to a brownfield soil using Tenax® beads in order to compare PAHs bioaccessibility in soil samples. PAHs desorption kinetics were established, described by a site distribution model, and a common extraction time was calculated (48 h). Second, the role of two Fabaceae (Medicago sativa L. or Trifolium pratense L.) root exudates in enhancing PAHs bioaccessibility and biodegradation in the studied soil was evaluated during microcosms experiments (28 °C). The CO2 emissions were significantly higher in presence of T. pratense exudates; the dehydrogenase activities showed improvements of the soil microbial activity in presence of two types of root exudates compared to untreated soil samples; the PAHs residual contents decreased more in untreated samples than in the presence of T. pratense exudates; and M. sativa exudates lowered PAHs bioaccessibility but not residual contents.

International audience | In the last two decades, awareness grew on the matter of the impact of environment on human health. Contaminants sorbed onto soil and settled dust can be ingested and thus represent a hazard, particularly to young children, who play on the ground and bring their hands and objects to their mouth. Metal(loid)s and polycyclic aromatic hydrocarbons (PAHs) are of concern as they are both carcinogenic to humans and ubiquitous in outdoor environments. The present study aims to assess the total and bioaccessible fractions of PAHs and metal(loid)s present in settled dust of four preschools located in industrial, urban, and suburban areas. On the one hand, children’s incremental life cancer risks (ILCR) were calculated according to ingestion pathway. On the other hand, the genotoxicities of the bioaccessible dust-bonded contaminants were determined on gastric cells. PAH concentrations ranged from 50.9 to 2267.3 ng/g, and the bioaccessible fraction represented 10.7% of the total in average. Metal(loid) concentration ranged from 12,430 to 38,941 µg/g, and the mean bioaccessibility was of 40.1%. Cancer risk ranged from 2.8.105 to 8.6.105, indicating that there is a potential cancer risk for children linked to the ingestion of settled dust. The inorganic bioaccessible fraction induced little DNA (< 20%TailDNA) and chromosomal damages (30% increase in micronuclei), whereas the organic bioaccessible fraction induced higher DNA (17–63%TailDNA) and chromosomal damages (88% increase in micronuclei). Such experimental approach needs to be deepen, as a tool complementary to cancer risk calculation, since the latter only lays on a set of targeted contaminants with known toxicity values.

We investigated the biological response of soluble organic fraction (SOF) and water-soluble fraction (WSF) extracted from particulate matter (PM) emitted by an automotive diesel engine operating in a representative urban driving condition. The engine was fueled with ultra-low sulfur diesel (ULSD), and its binary blends by volume with 13% of butanol (Bu13), and with hydrotreated vegetable oil (HVO) at 13% (HVO13) and 20% (HVO20). Cytotoxicity, genotoxicity, oxidative DNA damage and ecotoxicity tests were carried out, and 16 polycyclic aromatic hydrocarbons (PAH) expressed as tbenzo(a)pyrene total toxicity equivalent (BaP-TEQ) were also analyzed. The Hepatocarcinoma epithelial cell line (HepG2) was exposed to SOF for 24 h and analyzed using comet assay, with the inclusion of formamidopyrimidine DNA glycosylase (FPG) and endonuclease III (Endo III) to recognize oxidized DNA bases. The WSF was evaluated through acute ecotoxicity tests with the aquatic microcrustacean Daphnia pulex (D. Pulex). Results showed that there was no cytotoxic activity for all tested SOF concentrations. Genotoxic responses by all the SOF samples were at same level, except for the HVO13 which was weaker in the absence of the enzymes. The addition of the FPG and Endo III enzymes resulted in a significant increase in the comet tail, indicating that the DNA damage from SOF for all tested fuel blends involves oxidative damage including a higher level of oxidized purines for ULSD and Bu13 in comparison with HVO blends, but the oxidized pyrimidines for HVO blends were slightly higher compared to Bu13. The WSF did not show acute ecotoxicity for any of the fuels. Unlike other samples, Bu13-derived particles significantly increase the BaP-TEQ. The contribution to the genotoxic activity and oxidative DNA from SOF was not correlated to BaP-TEQ, which means that the biological activity of PM might be affected also by other toxic compounds present in particulate phase.

In response to the growing worldwide plastic pollution problem, the field of nanoplastics research is attempting to determine the risk of exposure to nanoparticles amidst their ever-increasing presence in the environment. Since little is known about the attributes of environmental nanoplastics (concentration, composition, morphology, and size) due to fundamental limitations in detection and quantification of smaller plastic particles, researchers often improvise by engineering nanoplastic particles with various surface modifications as models for laboratory toxicological testing. Polystyrene and other commercially available or easily synthesized polymer materials functionalized with surfactants or fluorophores are typically used for these studies. How surfactants, additives, fluorophores, the addition of surface functional groups for conjugation, or other changes to surface attributes alter toxicological profiles remains unclear. Additionally, the limited polymers used in laboratory models do not mimic the vast range of polymer types comprising environmental pollutants. Nanomaterials are tricky materials to investigate due to their high surface area, high surface energies, and their propensity to interact with molecules, proteins, and biological probes. These unique properties can often invalidate common laboratory assays. Extreme care must be taken to ensure that results are not artefactual. We have gathered zeta potential values for various polystyrene nanoparticles with different functionalization, in different solvents, from the reported literature. We also discuss the effects of surface engineering and solvent properties on interparticle interactions, agglomeration, particle-protein interactions, corona formation, nano-bio interfaces, and contemplate how these parameters might confound results. Various toxicological exemplars are critically reviewed, and the relevance and shortfalls of the most popular models used in nanoplastics toxicity studies published in the current literature are considered.

The influence of palm oil biodiesel content on the cytotoxicity, mutagenicity and genotoxicity of particle- and gas-phase diesel vehicle emissions was investigated. The emissions were collected on-board of a EURO IV diesel truck, fuelled with mixtures of 10% (B10), 20% (B20) and 100% (B100) of palm oil biodiesel, under real driving conditions. Organic extracts of the particulate matter (PM) and gases were characterised for 17 PAH (including EPA priority) and used for the biological assay. Increasing biodiesel content in the fuel mixture results in a decrease in the PM and PAH emission factors, both in the particulate and gas-phase. The majority of the PAH are present in the gas-phase. The mutagenic potencies, in TA98 bacteria, are higher for B20 in both phases, whereas the mutagenicity emission factor, that takes into account the lower emission of PM and PAH, is not significantly different between the fuels. Higher direct mutagenicity (TA98 + S9) is observed in all the tested fuels, indicating the action of carcinogenic compounds other than non-substituted PAH. The gas-phase extracts present higher cytotoxicity and genotoxicity in lung epithelial cell A549, which may be related to the higher PAH content in the gas-phase. The increase in biodiesel content have a different impact on cytotoxicity, being larger in the gas-phase and lower in the particle-phase. This indicates that pulmonary toxicity may be higher for the gaseous emissions, due to the role of different toxic compounds compared to the PM. The adverse biological effects when biodiesel content increases are not consequent with the reduction of the PAH characterised, indicating that other toxic compounds are more relevant. Further investigations to identify these compounds are required in order to update and focus the efforts regarding emission targets and controls.