Plastic debris is one of the major environmental concerns for the coastal area of Brunei Darussalam. It reduces the aesthetic appeals of the beaches in the country. The current study investigates marine debris on six different beaches of Brunei Darussalam along the South China Sea. Plastic was found the most abundant among whole debris by number (90.02%) and by weight (39.12%). It was classified by size (micro (<5 mm), meso (5-20 mm), macro (21-100), and mega (>100 mm)), colour (transparent, coloured, white and black). Fourier Transform Infrared Spectroscopy (FT-IR) was used to investigate the types of plastics and additives present in it. Statistical analysis using Minitab 17 and Kruskal-Wallis test was performed for comparison of data at different study sites. All major types of plastics were found in different forms with varying quantities from which toxic chemicals may leach out during degradation. The highest abundance by the number of plastic debris was found on Muara beach with a mean value 74.428 n/m2 ± 34.33 n/m2, while the lowest abundance was found on Lumut beach 53 n/m2 ± 20.9 n/m2. The study shows beaches used for recreational facilities are likely to have more debris as compared to other beaches.

Plastic floating on the ocean surface represents about 1 % of all plastic in the ocean, despite the buoyancy of most plastics. Biofouling can help to sink debris, which could explain this discrepancy. A set of laboratory experiments was conducted to investigate biofilm-induced effects on the buoyancy of different plastic debris. Ten materials of different densities (buoyant/non-buoyant), sizes (micro/meso/macro), and shapes (irregular/spherical/cylindrical/ flat), including facemasks and cotton swabs, were evaluated. Biofilm was incubated in these materials from a few weeks to three months to investigate the effect of different growth levels on their buoyancy. Biofilm levels and rising/settling velocities were measured and compared at seven time-points. The results show a hindered buoyancy for solid materials, while hollow and open materials showed the opposite trend in early biofilm colonization stages. A relationship was established between biofilm-growth and equivalent sphere diameter that can be used to improve predictive modeling of plastic-debris transport. | This work was funded by the European Regional Development Funds (Interreg Maritime IT FR program) under the SPlasH & Co project (contract number D35F21002010001). The first author was supported by a Margarita Salas Postdoctoral Fellowship funded by the European Union-NextGenerationEU, Ministry of Universities and Recovery Transformation and Resilience Plan, through a call from the University of Cantabria and the Government of Cantabria through the Fénix program.

Plastic debris is a significant threat to marine and coastal ecosystems. Previous research found that waves, wind, as well as density, size, and shape of microplastics, drive their transport and dispersion. In this paper, a set of laboratory experiments on the effect of waves and wave-induced currents on the input rate and cross-shore transport and dispersion of different types of plastic debris, including the macro and mesosizes, in addition to microplastics is presented. 15 plastic-debris types characterized by different sizes, shapes, and densities, including facemasks, were analyzed under regular and irregular wave conditions. The results show that input and transport rates of plastics depend on their terminal velocities and wave steepness. Plastics with higher settling velocities under less-steep wave conditions are likely to escape coastal entrapment and end up in the breaking zone. However, plastics with greater buoyancy rates under steeper waves show a predominant accumulation closer to the shoreline. | P.N. is supported by a Margarita Salas post-doctoral fellowship funded by 638 European Union-NextGenerationEU,Ministry of Universities and Recovery Trans639 formation and Resilience Plan, through a call fromthe University of Cantabria. The 640 financial support from the Government of Cantabria through the FÉNIX Program 641 (ID 2020.03.03.322B.742.09) is warmly acknowledged. We acknowledge M.S. and the IHLab-Hydro team for all the technical support.

peer reviewed | Plastic debris are accumulating in the marine environment and aggregate microorganisms that form a new ecosystem called the plastisphere. Better understanding the plastisphere is crucial as it has self-sufficient orga- nization and carries pathogens or organisms that may be involved in the pollutant adsorption and/or plastic degradation. To date, the plastisphere is mainly described at the taxonomic level and the functioning of its microbial communities still remains poorly documented. In this work, metagenomic and metaproteomic analyzes were performed on the plastisphere of polypropylene and polyethylene plastic debris sampled on a pebble beach from the Mediterranean Sea. Our results confirmed that the plastisphere was organized as self-sufficient eco- systems containing highly active primary producers, heterotrophs and predators such as nematode. Interestingly, the chemical composition of the polymer did not impact the structure of the microbial communities but rather influenced the functions expressed. Despite the fact that the presence of hydrocarbon-degrading bacteria was observed in the metagenomes, polymer degradation metabolisms were not detected at the protein level. Finally, hydrocarbon degrader (i.e., Alcanivorax) and pathogenic bacteria (i.e., Vibrionaceae) were observed in the plas- tispheres but were not very active as no proteins involved in polymer degradation or pathogeny were detected. This work brings new insights into the functioning of the microbial plastisphere developed on plastic marine debris.

Microbial biofilms can rapidly colonize plastic debris in aquatic environments and subsequently, accumulate chemical pollutants from the surrounding water. Here, we studied the microbial colonization of different plastics, including polyethylene terephthalate (PET), polypropylene (PP), polyvinyl chloride (PVC), and polyethylene (PE) exposed in three freshwater systems (the Qinhuai River, the Niushoushan River, and Donghu Lake) for 44 days. We also assessed the biofilm mass and associated metals attached to plastics. The plastics debris characteristics, such as contact angle and surface roughness, greatly affected the increased biofilm biomass. All types of metal accumulation onto the plastic substrate abundances significantly higher than the concentrations of heavy metal in the water column, such as Ba (267.75 μg/g vs. 42.12 μg/L, Donhu Lake), Zn (254 μg/g vs. 0.023 μg/L the Qinhuai River), and Cr (93.75 μg/g vs. 0.039 μg/L, the Niushoushan River). Compared with other metals, the heavy metal Ba, Cr and Zn accumulated easily on the plastic debris (PET, PP, PVC, and PE) at all incubation sites. Aquatic environmental factors (total nitrogen, total phosphorus, and suspended solids concentrations) largely shaped metal accumulation onto plastic debris compared with plastic debris properties.

Studies of microplastics (MPs) in remote, trans-boundary and alpine rivers are currently lacking. To understand the sinks and transport mechanisms of MPs, this study investigated the distributions and sources of MPs in the surface waters and sediments of five tributaries of the Koshi River (KR), a typical alpine river in the Himalayas between China and Nepal. Mean abundances of MPs in water and sediment were 202 ± 100 items/m³ and 58 ± 27 items/kg, dry weight, respectively. The upstream tributary, Pum Qu in China, had the smallest abundance of MPs, while the middle tributary, Sun Koshi in Nepal, had the greatest abundance. Compared to international values in rivers, contamination of the KR with MPs was low to moderate. Fibers represented 98% of all MP particles observed, which consisted of polyethylene, polyethyleneterephthalate, polyamide, polypropylene, and polystyrene. Blue and black MPs were prevalent, and small MPs (<1 mm) accounted for approximately 60% of all MPs. Atmospheric transmission and deposition were considered to be the principal sources of MPs in the upstream tributary. The results imply that point sources associated with mostly untreated sewage effluents and solid wastes from households, major settlements, towns, and cities were most important sources of MPs in the KR. Non-point sources from agricultural runoff and atmospheric transport and deposition in the middle stream tributaries also contribute a part of microplastics, while the least amount was from fishing in the downstream tributary. Urbanization, agriculture, traffic, and tourism contributed to pollution in the KR by MPs. Equations to predict abundances of MPs based on river altitudes revealed that different trends were affected by both natural and human factors within the KR basin. This study presents new insights into the magnitude of MP pollution of a remote alpine river and provides valuable data for developing MP monitoring and mitigation strategies in similar environments worldwide.

Microplastics in commercially important seafood species is an emerging area of food safety concern. While there have been reports of plastic particles in the gastrointestinal tract of several species, presence of microplastics in edible fish tissues has not yet been reported from India. This study examined the presence of microplastics in the edible (muscle and skin) and inedible (gill and viscera) tissues of nine commercially important pelagic fish species from Kerala, India. A total of 163 particles consisting mainly of fragments (58%) were isolated. Out of 270 fishes analysed (n = 30 per species), 41.1% of the fishes had microplastics in their inedible tissues while only 7% of fishes had microplastics in their edible tissues. The quantity of microplastics in inedible tissue was significantly larger in filter feeders than, that in visual predators (p < 0.05). The average abundance of microplastics in edible tissues was 0.07 ± 0.26 items/fish (i.e., 0.005 ± 0.02 items/g) and was 0.53 ± 0.77 items/fish (i.e., 0.054 ± 0.098 items/g) in inedible tissues. The results suggest the possibility of human intake of microplastics by the consumption of pelagic fishes from this region, albeit in small quantities.

Plastic pollution in the marine environment poses threats to wildlife and habitats through varied mechanisms, among which are the transport and transfer to the food web of hazardous substances. Still, very little is known about the metal content of plastic debris and about sorption/desorption processes, especially with respect to weathering. In this study, plastic debris collected from the North Atlantic subtropical gyre was analyzed for trace metals; as a comparison, new packaging materials were also analyzed. Both the new items and plastic debris showed very scattered concentrations. The new items contained significant amounts of trace metals introduced as additives, but globally, metal concentrations were higher in the plastic debris. The results provide evidence that enhanced metal concentrations increase with the plastic state of oxidation for some elements, such as As, Ti, Ni, and Cd. Transmission electron microscopy showed the presence of mineral particles on the surface of the plastic debris. This work demonstrates that marine plastic debris carries complex mixtures of heavy metals. Such materials not only behave as a source of metals resulting from intrinsic plastic additives but also are able to concentrate metals from ocean water as mineral nanoparticles or adsorbed species.

Marine plastic waste has become an ever-increasing environmental threat in the world’s ocean largely due to their unique properties and ubiquitous occurrence. They include diverse forms of land- and ocean-based sources of plastics and are estimated to account for up to 85% of marine debris worldwide. As secondary pollutants, marine microplastic particles (<5 mm) are derived from pellet loss and degradation of macroplastics. Up to now, several reports have proposed negative impacts of both macro-sized and micro-sized plastics on marine biota. As one of the rapidly growing economies, China is the topmost contributor of plastic waste in the world. China’s massive impact on the plastic levels of the ocean are a definite cause of concern and is developing multiple economic, environmental and biological complications. The research of plastics impact on coastal environments in China is only incipient. Here we review the available information on plastic waste, their impacts on marine biota and human health, and Chinese government policies and management initiatives. Although Chinese coastal environments (surface water, coastal sediments, water column) are affected by microplastics pollution, both from land-based and sea-based activities, their impacts on marine biota remain to be elucidated. Though national-level policies are modern and well suited for minimizing the impacts of plastic pollution, there is hardly any legislation for containment of microplastic pollution. Our objective is to review and summarize the information about the occurrence, impacts, and management of plastic pollution in the Chinese coastal environments in order to comprehend their widespread repercussions.Microplastics are increasingly being detected and quantified in Chinese coastal environments and legislation for containment of such pollution is highly recommended.

Plastic debris incidence in marine environment was already highlighted in the early 1970s. Over the last decade, microplastic pollution in the environment has received increasing attention and is now an emerging research area. Many studies have focused on quantifying microplastic abundance in the marine environment, while there are relatively few data on microplastic occurrence in freshwater environment. Recent studies have reported high concentrations of microplastics in lakes and rivers, although the understanding of several factors influencing source, transport and fate is still limited. This study compares different lakes and the common factors, which could influence the occurrence and distribution of microplastics. The three subalpine lakes monitored include Lake Maggiore, Iseo and Garda. The selected sampling transects reflect the hydrologic conditions, the morphometric characteristics of these lakes, and other factors influencing the release of plastics debris in lakes. Particles of microplastics (<5 mm) were found in all sampled surfaces. The particles collected were classified depending on their number, shape and composition. The shape distribution showed the dominating occurrence of fragments (73.7%). The chemical composition of all examined samples clearly shows dominating presence of polyethylene (45%), polystyrene (18%) and polypropylene (15%). The results provide significant relations among the different contribution of direct and diffuse sources to the quantity of microplastics, highlighting the importance of understanding the spatial distribution dynamics of microplastics within a lake system that acts as a sink and source of plastic particles.