Population’s exponential growth along with drought has increased water resources limitation, especially in arid and semi-arid area. Therefore, the use of non-conventional water is an important tool for water resource management. If unconventional water has no negative impact on soil properties and water, it can be used for irrigation coupled with desertification projects. So, this paper tries to present the effect of irrigation with municipal wastewater, salt water, brackish water, and combination of salty water and wastewater on some soil properties including nitrogen, phosphorus, and potassium in Qom plain. Soil samples were taken from agricultural land treated by wastewater, saline water, brackish water, combination of salty water, and wastewater and range land as control in five treatments from depths of 0-30 and 60-90 centimeter. The results showed that wastewater has increased the amount of N, P, and K to other treatments and control area. The concentration of potassium in surface layer of area treated by combination of salty water and wastewater with amount of 459.39 ppm has the most significant difference to control and other treatments. Also, the maximum amount of nitrogen was observed in sub layer of saline and brackish water treatment with amount of 0.08 percent.

With a mean precipitation rate, much lower than that of the world, Iran is among the countries that face severe water challenges. The present study has dealt with the evaluation of hydrochemistry of Faryab spring water in Hormozgan Province, Iran. Four different composite water samples have been analyzed to detect major anions, cations, total dissolved solids, electrical conductivity, pH, and sodium absorption ratio. The dominant water type was detected as sodium-chloride, with remarkable high concentration of sodium and chloride ions that makes it unfit for drinking purposes. Regarding irrigation use, high values of electrical conductivity (29989 to 31983 µS/cm) and sodium absorption ratio (SAR) (58.1 to 61) indicate a very high risk level for salinity and sodium alkali hazards, respectively. Abundance of secondary minerals such as halite and gypsum is considered to be the main reason for remarkably-high TDS values. Intensity of salt domes within the area would also facilitate solution/dissolution process of Na+ and Cl- into water column.

Corrosion is an environmental and economic global problem. “Smart” or stimuli-responsive colorimetric nanosensors for maritime coatings have been proposed as an asset to overcome the limitations of the current monitoring techniques by changing color in the presence of triggers associated with the early stages of corrosion. Layered double hydroxides (Zn–Al LDH; Mg–Al LDH) and silica mesoporous nanocapsules (SiNC) were used as precursor nanocarriers of active compounds: hexacyanoferrate ions ([Fe(CN)₆]³⁻) and phenolphthalein (PhPh), respectively. Additionally, the safer-by-design principles were employed to optimize the nanosensors in an eco-friendly perspective (e.g., regular vs. warm-washed SiNC-PhPh; immobilization using different carriers: Zn–Al LDH-[Fe(CN)₆]³⁻ vs. Mg–Al LDH-[Fe(CN)₆]³⁻). Therefore, the present study aims to assess the environmental behavior in saltwater and the toxic effects of the nanosensors, their nanocarriers, and the active compounds on the marine microalgae Tetraselmis chuii and the crustacean Artemia salina. Briefly, tested compounds exhibited no acute toxic effects towards A. salina (NOEC = 100 mg/L), apart from SiNC-PhPh (LC₅₀ = 2.96 mg/L) while tested active compounds and nanosensors caused significant growth inhibition on T. chuii (lowest IC₅₀ = 0.40 mg/L for SiNC-PhPh). The effects of [Fe(CN)₆]³⁻ were similar regardless of the nanocarrier choice. Regarding SiNC-PhPh, its toxicity can be decreased at least twice by simply reinforcing the nanocapsules washing, which contributes to the removal (at least partially) of the surfactants residues. Thus, implementing safe-by-design strategies in the early stages of research proved to be critical, although further progress is still needed towards the development of truly eco-friendly nanosensors.

The Pearl River Estuary (PRE), the largest estuary in Southern China, historically has suffered from metal contamination as a result of inputs from different riverine discharges. Determining the sources of metals accumulation in local aquatic flora and fauna remains a great challenge for this estuarine system with complex water circulation. In this study, Zn isotope ratios were measured in local oysters (Crassostrea hongkongensis) collected at 8 locations in the estuary on four occasions from 2014 to 2018, to better understand and assess the contamination sources. The results showed no significant differences (p < 0.05) in δ⁶⁶Zn values in oysters among the four sampling dates within individual sites. However, approximately a 0.67‰ (range from -0.66‰ to 0.01‰) difference in average δ⁶⁶Zn values was consistently found in oysters collected from the east side of the estuary compared to the west side, despite their comparable Zn concentrations. A mixing model was subsequently used to estimate the relative contributions from various sources to the δ⁶⁶Zn values in these oysters. The mixing model predicts that zinc derived from the dissolved fraction (approximately 80 %) was the dominant uptake pathway for oysters collected at the east shore whereas approximately 50 % of the Zn in oysters collected at the west shore was derived from the particulate fraction. The mixing model also was used to estimate the relative impacts of fresh versus saline water on the measured δ⁶⁶Zn values. Contributions from these two sources also varied between the east and west shores. This study presents the first data for Zn isotope ratios in oysters from the PRE, providing new insight for using Zn isotope ratios in oysters as a powerful tracer of sources in a complex estuarine system.

Potentially toxic elements (PTEs) are of major concern due to their high persistence and toxicity. Recently, rare earth elements (REEs) concentration in aquatic ecosystems has been increasing due to their application in modern technologies. Thus, this work aimed to study, for the first time, the influence of REEs (lanthanum, cerium, praseodymium, neodymium, europium, gadolinium, terbium, dysprosium and yttrium) and of salinity (10 and 30) on the removal of PTEs (Cd, Cr, Cu, Hg, Ni and Pb) from contaminated waters by living macroalgae (Fucus spiralis, Fucus vesiculosus, Gracilaria sp., Osmundea pinnatifida, Ulva intestinalis and Ulva lactuca). Experiments ran for 168 h, with each macroalga exposed to saline water spiked with the six PTEs and with the six PTEs plus nine REEs (all at 1 μmol L⁻¹) at both salinities. Results showed that all species have high affinity with Hg (90–99% of removal), not being affected neither by salinity changes nor by the presence of other PTEs or REEs. Cd showed the lowest affinity to most macroalgae, with residual concentrations in water varying between 50 and 108 μg L⁻¹, while Pb removal always increased with salinity decline (up to 80% at salinity 10). REEs influence was clearer at salinity 30, and mainly for Pb. No substantial changes were observed in Ni and Hg sorption. For the remaining elements, the effect of REEs varied among algae species. Overall, the results highlight the role of marine macroalgae as living biofilters (particularly U. lactuca), capable of lowering the levels of top priority hazardous substances (particularly Hg) and other PTEs in water, even in the presence of the new emerging contaminants - REEs. Differences in removal efficiency between elements and macroalgae are explained by the contaminant chemistry in water and by macroalgae characteristics.

Rapidly growing global population adds significant strains on the fresh water resources. Consequently, saline water is increasingly tapped for crop irrigation. Meanwhile, rapid advancement of nanotechnology is introducing more and more engineered nanoparticles into the environment and in agricultural soils. While some negative effects of ENPs on plant health at very high concentrations have been reported, more beneficial effects of ENPs at relatively low concentrations are increasingly noticed, opening doors for potential applications of nanotechnology in agriculture. In particular, we found that cerium oxide nanoparticles (CeO2NPs) improved plant photosynthesis in salt stressed plants. Due to the close connections between salt stress tolerance and the root anatomical structures, we postulated that CeO2NPs could modify plant root anatomy and improve plant salt stress tolerance. This study aimed at testing the hypothesis with Brassica napus in the presence of CeO2NPs (0, 500 mg kg−1 dry sand) and/or NaCl (0, 50 mM) in a growth chamber. Free hand sections of fresh roots were taken every seven days for three weeks and the suberin lamellae development was examined under a fluorescence microscope. The results confirmed the hypothesis that CeO2NPs modified the formation of the apoplastic barriers in Brassica roots. In salt stressed plants, CeO2NPs shortened the root apoplastic barriers which allowed more Na+ transport to shoots and less accumulation of Na+ in plant roots. The altered Na+ fluxes and transport led to better physiological performance of Brassica and may lead to new applications of nanotechnology in agriculture.

Probabilistic environmental quality criteria for Naphthalene (Nap), Phenanthrene (Phe), Fluoranthene (Flu), Pyrene (Pyr), Triclosan (TCS), Tributyltin (TBT), Chlorpyrifos (CPY), Diuron (DUR), γ-Hexaclorocyclohexane (γ-HCH), Bisphenol A (BPA) and 4-Nonylphenol (4-NP) were derived from acute toxicity data using saltwater species representative of marine ecosystems, including algae, mollusks, crustaceans, echinoderms and chordates. Preferably, data concerns sublethal endpoints and early life stages from bioassays conducted in our laboratory, but the data set was completed with a broad literature survey. The Water Quality Criteria (WQC) obtained for TBT (7.1·10⁻³ μg L⁻¹) and CPY (6.6· 10⁻³ μg L⁻¹) were orders of magnitude lower than those obtained for PAHs (ranging from 3.75 to 45.2 μg L⁻¹), BPA (27.7 μg L⁻¹), TCS (8.66 μg L⁻¹) and 4-NP (1.52 μg L⁻¹). Critical values for DUR and HCH were 0.1 and 0.057 μg L⁻¹ respectively. Within this context, non-selective toxicants could be quantitatively defined as those showing a maximum variability in toxicity thresholds (TT) of 3 orders of magnitude across the whole range of marine diversity, and a cumulative distribution of the TT fitting to a single log-logistic curve, while for selective toxicants variability was consistently found to span 5 orders of magnitude and the TT distribution showed a bimodal pattern. For the latter, protective WQC must be derived taking into account the SSD of the sensitive taxa only.

Desalination is a growing activity that has introduced a new impact, brine discharge, which may affect benthic communities. Although the role of polychaetes as indicators to assess organic pollution is well known, their tolerance to salinity changes has not been examined to such a great extent. The aim of this study was to examine the effect of brine discharge over soft bottom polychaete assemblage along the Alicante coast (Southeast Spain) over a two year period. Changes in the polychaete assemblage was analysed using univariate and multivariate techniques. We compared a transect in front of the discharge with two controls. At each transect we sampled at three depths (4, 10 and 15 m) during winter and summer. We have observed different sensitivity of polychaete families to brine discharges, Ampharetidae being the most sensitive, followed by Nephtyidae and Spionidae. Syllidae and Capitellidae showed some resistance initially, while Paraonidae proved to be a tolerant family. The Polychaete assemblage is affected by the brine discharge of the Alicante desalination plant and we detect different sensitivity levels in polychaete families to brine impact.

To evaluate the chemical status of groundwater bodies (GWB) according to the European Groundwater Directive, EU Member States are required to take into account natural background levels (NBLs) where needed. Assessing the NBLs in coastal GWBs is complicated by seawater intrusion which can be amplified by groundwater withdrawals increasing the salinization of such groundwater systems. This paper proposes a new method for the NBLs assessment in coastal areas based on a double pre-selection (PS) with fixed/dynamic limits. A case study in the Apulia region, located in southeastern Italy, is proposed, where we investigated four adjacent GWBs which form the complex karst, fractured Murgia aquifer, hosted in the Jurassic-Cretaceous carbonate platform, bounded by two seas and sustained by saltwater of marine intrusion in the coastal areas. Data related to 139 monitoring stations (MSs) of the regional groundwater monitoring network were used. The first PS, “static”, based on a fixed limit of anthropogenic contamination markers (NO₃ and NH₄), allows for the elimination of MSs impacted by human activities. On these, the second PS, “dynamic”, based on the identification of Cl anomalous values, allows for the identification of additional MSs affected by saline contamination. The residual dataset of MSs was used for the definition of NBLs of Cl, SO₄, F and B. A statistical comparison with historical Cl observations finally allowed us to verify if the salinity of current groundwater is representative of pristine conditions. The calculated NBLs of salinity parameters are higher for the two coastal GWBs, with chloride values between 0.8 and 2 mg/L. Conversely, fluorides always show very low NBLs. The double PS approach seems more effective for NBLs calculation in coastal aquifers affected by saline contamination, where the use of a fixed Cl limit fails. It may respond to the international needs for a standardized procedure for NBL assessment.

Microplastics have been proven to be hotspots of bacterial pathogens and antibiotic resistance genes (ARGs). The enrichment of ARGs in microplastisphere, the specific niche for diverse microbial communities attached to the surface of microplastic, has attracted worldwide attention. By collecting 477 pairs of ARG abundance data belonging to 26 ARG types, based on the standardized mean difference (SMD) under the random effect model, we have performed the first meta-analysis of the ARG enrichment on microplastics in aquatic environments in order to quantitatively elucidate the enrichment effect, with comparison of non-microplastic materials. It was found that ARGs enriched on the microplastics were more abundant than that on the inorganic substrates (SMD = 0.26) and natural water environments (SMD = 0.10), but lower abundant than that on the natural organic substrates (SMD = −0.52). Furthermore, microplastics in freshwater tended to have a higher degree of ARG enrichment than those in saline water and sewage. The biofilm formation stage, structure, and component of microplastisphere may play a significant role in the enrichment of ARGs.