Chemicals such as triclosan are a concern because of their presence on daily products (soap, deodorant, hand sanitizers …), consequently this compound has an ubiquitous presence in the environment. Little is known about the effect of this bactericide on aquatic life. The aim of this study is to analyze triclosan exposure (24 h) to an in vitro model, zebrafish hepatocytes cell line (ZF-L), if it can be cytotoxic (mitochondrial activity, membrane stability and apoptosis) and if can activate ATP-binding cassette (ABC) proteins (activity, expression and protein/compound affinity). Triclosan was cytotoxic to hepatocytes when exposed to concentrations (1–4 mg/L). The results showed impaired mitochondria function, as well, plasma membrane rupture and an increase of apoptotic cells. We observed an ABC proteins activity inhibition in cells exposed to 0.5 and 1 mg/L. When ABCBs and ABCC2 proteins expression were analyzed, there was an increase of protein expression in both ABC proteins families on cells exposed to 1 mg/L of triclosan. On molecular docking results, triclosan and the fluorescent used as substrate (rhodamine) presented high affinity with all ABC proteins family tested, showing a greater affinity with ABCC2. In conclusion, this study showed that triclosan can be cytotoxic to ZF-L. Molecular docking indicated high affinity between triclosan and the tested pumps.

Antibiotic resistance is a major public health concern. Triclosan is an antimicrobial compound with direct links to antibiotic resistance that was widely used in soaps in the U.S. until its ban by the U.S. Food and Drug Administration. Benzalkonium chloride (BAC), a quaternary ammonium compound, has widely replaced triclosan in soaps marketed as an antibacterial. BAC has been detected in surface waters and its presence will likely increase following increased use in soap products. The objective of this study was to determine the effect of BAC on relative abundance of antibiotic resistance in a bacterial community from a surface water used as a source for drinking water treatment. Bench-scale microcosm experiments were conducted with microbial communities amended with BAC at concentrations ranging from 0.1 μg L⁻¹ to 500 μg L⁻¹. Phenotypic antibiotic resistance was quantified by culturing bacteria in the presence of different antibiotics, and genotypic resistance was determined using qPCR to quantify antibiotic resistance genes (ARGs). BAC at concentrations ranging from 0.1 μg L⁻¹ to 500 μg L⁻¹ was found to positively select for bacteria resistant to ciprofloxacin and sulfamethoxazole, and negatively select against bacteria with resistance to six other antibiotics. Exposure to BAC for 14 days increased the relative abundance of sul1 and blaTEM. This study re-highlights the importance of employing both culture and non-culture-based techniques to identify selection for antibiotic resistance. The widespread use of BAC will likely impact antibiotic resistance profiles of bacteria in the environment, including in source waters used for drinking water, wastewater treatment plants, and natural waterways.

Triclosan (TCS) is a broad-spectrum antimicrobial used in a variety of consumer products. While it was recently banned from hand soaps in the US, it is still a key ingredient in a top-selling toothpaste. TCS is a hydrophobic micropollutant that is recalcitrant under anaerobic digestion thereby resulting in high TCS concentrations in biosolids. The objective of this study was to determine the impact of TCS on the antibiotic resistome and potential cross-protection in lab-scale anaerobic digesters using shotgun metagenomics. It was hypothesized that metagenomics would reveal selection for antibiotic resistance genes (ARGs) not previously found in pure culture studies or mixed-culture studies using targeted qPCR. In this study, four different levels of TCS were continuously fed to triplicate lab-scale anaerobic digesters to assess the effect of TCS levels on the antibiotic resistance gene profiles (resistome). Blasting metagenomic reads against antibiotic/metal resistance gene database (BacMet) revealed that ARG diversity and abundance changed along the TCS concentration gradient. While loss of bacterial diversity and digester function were observed in the digester treated with the highest TCS concentration, FabV, which is a known TCS resistance gene, increased in this extremely high TCS environment. The abundance of several other known ARG or metal resistance genes (MRGs), including corA and arsB, also increased as the concentrations of TCS increased. Analysis of other functional genes using SEED database revealed the increase of potentially key genes for resistance including different types of transporters and transposons. These results indicate that antimicrobials can alter the abundance of multiple resistance genes in anaerobic digesters even when function (i.e. methane production) is maintained. This study also suggests that enriched ARGs could be released into environments with biosolids land application.

For clearing pollutants and emerging contaminants like ciprofloxacin-500mg from wastewaters generated from pharmaceutical industries, soapnut seeds biochar was synthesized and used as an adsorbent for the effective removal process. Tubular furnace operated under nitrogen gas environment was used to synthesize biochar. The batch analysis were carried out successfully to study the removal mechanism and the removal efficiency of the chosen pollutant. The soapnut seeds biochar showed excellent adsorption of ciprofloxacin at pH 6 and temperature 303 K when the dosage was 0.07 g. The Langmuir removal capacity of 33.44 mg/g was received and the Freundlich model provided the best-fits. The ciprofloxacin-500mg adsorption process correlated well with the pseudo-second-order kinetics equation, and the intraparticle diffusion mechanism mainly controlled the process. The characterization of biochar concluded that O–H groups, CO groups, COO⁻groups and C–F groups, and π-π interactions, pore-filling effect, and cation exchange interactions played a role in the adsorption process. Therefore, the findings of the present work revealed that soapnut seeds biochar would be an excellent low-cost adsorbent for the removal of ciprofloxacin-500mg from wastewater.

The increased use of disinfectants due to the spread of the novel coronavirus infection (e.g. COVID-19) has caused burden in the environment but knowledge on its ecotoxicological impact on the estuary environment is limited. Here we report in vivo and molecular endpoints that we used to assess the effects of chloroxylenol (PCMX) and benzalkonium chloride (BAC), which are ingredients in liquid handwash, dish soap products, and sanitizers used by consumers and healthcare workers on the estuarine rotifer Brachionus koreanus. PCMX and BAC significantly affected the life table parameters of B. koreanus. These chemicals modulated the activities of antioxidant enzymes such as superoxide dismutase and catalase and increased reactive oxygen species even at low concentrations. Also, PCMX and BAC caused alterations in the swimming speed and rotation rate of B. koreanus. Furthermore, an RNA-seq-based ingenuity pathway analysis showed that PCMX affected several signaling pathways, allowing us to predict that a low concentration of PCMX will have deleterious effects on B. koreanus. The neurotoxic and mitochondrial dysfunction event scenario induced by PCMX reflects the underlying molecular mechanisms by which PCMX produces outcomes deleterious to aquatic organisms.

Fish hold effluent and the effluent produced from the cleaning of fish holds may contain organic material resulting from the degradation of seafood and cleaning products (e.g., soaps and detergents). This effluent is often discharged by vessels into near shore waters and, therefore, could have the potential to contribute to water pollution in bays and estuaries. We characterized effluent from commercial fishing vessels with holds containing refrigerated seawater, ice slurry, or chipped ice. Concentrations of trace heavy metals, wet chemistry parameters, and nutrients in effluent were compared to screening benchmarks to determine if there is a reasonable potential for effluent discharge to contribute to nonattainment of water quality standards. Most analytes (67%) exceeded their benchmark concentration and, therefore, may have the potential to pose risk to human health or the environment if discharges are in significant quantities or there are many vessels discharging in the same areas.

Potassium hydroxide (KOH) digestion protocols are currently applied to separate microplastics from biological samples, allowing efficient digestion with minor degradation of polymers in a time- and cost-effective way. For biota samples with high-fat content, KOH reacts with triglycerides generating an overlying soap layer, making difficult the digestion and solubilization and subsequent microplastics extraction. Here we studied the addition of Tween-20 in different concentrations to evaluate the effect on the soap layer of post-digested samples. Addition of 10 % of Tween-20 presented higher flow rate during filtration, being set as optimal value. Incorporation of Tween-20 in the extraction procedure increased recovery rates of LDPE, PC and PET and appears to have a protective effect on PC and PET degradation. Tween-20 did not interfere in FTIR spectrum of polymers available in the marine environment. Being low-toxic, makes addition of Tween-20 a simple and economical way to optimize KOH digestion protocols for microplastics extraction.

Microplastics enter the environment as a result of larger plastic items breaking down (‘secondary’) and from particles originally manufactured at that size (‘primary’). Personal care products are an important contributor of secondary microplastics (typically referred to as ‘microbeads’), for example in toothpaste, facial scrubs and soaps. Consumers play an important role in influencing the demand for these products and therefore any associated environmental consequences. Hence we need to understand public perceptions in order to help reduce emissions of microplastics. This study explored awareness of plastic microbeads in personal care products in three groups: environmental activists, trainee beauticians and university students in South West England. Focus groups were run, where participants were shown the quantity of microbeads found in individual high-street personal care products. Qualitative analysis showed that while the environmentalists were originally aware of the issue, it lacked visibility and immediacy for the beauticians and students. Yet when shown the amount of plastic in a range of familiar everyday personal care products, all participants expressed considerable surprise and concern at the quantities and potential impact. Regardless of any perceived level of harm in the environment, the consensus was that their use was unnatural and unnecessary. This research could inform future communications with the public and industry as well as policy initiatives to phase out the use of microbeads.

In order to reduce the transmission of pathogens, and COVID-19, WHO and NHS England recommend hand washing (HW) and/or the use of hand sanitizer (HS). The planetary health consequences of these different methods of hand hygiene have not been quantified. A comparative life cycle assessment (LCA) was carried out to compare the environmental impact of the UK population practising increased levels of hand hygiene during the COVID-19 pandemic for 1 year. Washing hands with soap and water was compared to using hand sanitizer (both ethanol and isopropanol based sanitizers were studied). The isopropanol-based HS had the lowest environmental impact in 14 out of the 16 impact categories used in this study. For climate change, hand hygiene using isopropanol HS produced the equivalent of 1060 million kg CO₂, compared to 1460 million for ethanol HS, 2300 million for bar soap HW, and 4240 million for liquid soap HW. For both the ethanol and isopropanol HS, the active ingredient was the greatest overall contributing factor to the environmental impact (83.24% and 68.68% respectively). For HW with liquid soap and bar soap, there were additional contributing factors other than the soap itself: for example tap water use (28.12% and 48.68% respectively) and the laundering of a hand towel to dry the hands (10.17% and 17.92% respectively). All forms of hand hygiene have an environmental cost, and this needs to be weighed up against the health benefits of preventing disease transmission. When comparing hand sanitizers to handwashing with soap and water, this study found that using isopropanol based hand sanitizer is better for planetary health. However, no method of hand hygiene was ideal; isopropanol had a greater fossil fuel resource use than ethanol based hand sanitizer. More research is needed to find hand hygiene sources which do not diminish planetary health, and environmental impact is a consideration for public health campaigns around hand hygiene.

A residential lot impacted by spills from a leaking light heating oil tank was treated with a combination of chemical oxidation and bioremediation to avoid technically challenging excavation. The tank left emptied in the ground was used for slow infiltration of the remediation additives to the low permeability, clayey soil. First, hydrogen peroxide and citrate chelate was added for Fenton’s reaction–based chemical oxidation, resulting in a ca. 50% reduction from the initial 25,000 mg/kg average oil concentration in the soil below the tank. Part of this was likely achieved through mobilization of oily soil into the tank, which was beneficial in regards to the following biological treatment. By first adding live bacteria in a soil inoculum, and then oxygen and nutrients in different forms, an approximately 90% average reduction was achieved. To further enhance the effect, methyl-β-cyclodextrin surfactant (CD) was added, resulting finally in a 98% reduction from the initial average level. The applicability of the surfactant was based on laboratory-scale tests demonstrating that CD promoted oil degradation and, unlike pine soap, was not utilized by the bacteria as a carbon source, and thus inhibiting degradation of oils regardless of the positive effect on biological activity. The effect of CD on water solubility for different hydrocarbon fractions was tested to serve as the basis for risk assessment requirements for authorizing the use of the surfactant at the site.