Soil is a heterogeneous porous media that is comprised of a variety of organo-mineral aggregates. Sorption of heavy metals onto these composite solids is a key process that controls heavy metal mobility and fate in the natural environment. Pollution from a combination of heavy metals is common in soil, therefore, understanding the competitive binding behavior of metal ions to organo-mineral composites is important in order to predict metal mobility and fate. In this study, batch experiments were paired with spectroscopic studies to probe the sorption characteristics of ternary CdNiCu sorbates to a binary organo-goethite composite made with Bacillus cereus cells. Scanning electron microscopy shows that goethite nano-sized crystals are closely associated with the bacterial surfaces. Sorption experiments show a larger adsorptivity and affinity for Cu than Cd/Ni on goethite and B. cereus, and the goethite–B. cereus composite. X-ray photoelectron spectroscopy reveals that carboxylate and phosphate functional moieties present on the bacterial cell walls are primarily responsible for metal sorption to the goethite–B. cereus composite. Synchrotron-based X-ray fluorescence shows that Cu and Ni are predominately associated with the bacterial fraction of the goethite–B. cereus composite, whereas Cd is mainly associated with the goethite fraction. The findings of this research have important implications for predicting the mobility and fate of heavy metals in soil multi-component systems.

Black carbon (BC) plays a crucial role in sequestering hydrophobic organic contaminants in the environment. This study investigated key factors and mechanisms controlling nonideal sorption (e.g., sorption irreversibility and slow kinetics) of model hydrophobic organic contaminants (nitrobenzene, naphthalene, and atrazine) by rice-straw-derived BC. After removing the fraction of leachable pyrogenic organic carbon (LPyOC) (referring to composites of dissoluble non-condensed organic carbon and associated mineral components) with deionized water or 0.5 M NaOH, sorption of these sorbates to BC was enhanced. The sorption enhancement was positively correlated with sorbate molecular size in the order of atrazine > naphthalene > nitrobenzene. The removal of LPyOC also accelerated sorption kinetics and reduced sorption irreversibility. These observations were attributed to increased accessibility of BC micropores initially clogged by the LPyOC. Comparison of BC pore size distributions before and after atrazine sorption further suggested that the sorbate molecules preferred to access the micropores that were more open, and the micropore accessibility was enhanced by the removal of LPyOC. Consistently, the sorption of nitrobenzene and atrazine to template-synthesized mesoporous carbon (CMK3), a model sorbent with homogeneous pore structures, showed decreased kinetics, but increased irreversibility by impregnating sorbent pores with surface-grafted alkylamino groups and by subsequent loading of humic acid. These findings indicated an important and previously unrecognized role of LPyOC (i.e., micropore clogging) in the nonideal sorption of organic contaminants to BC.

We observed that the sorption kinetics of nitrobenzene and 2,4-dinitrotoluene (two model polar compounds) was significantly slower than that of 1,4-dichlorobenzene and phenanthrene (two model apolar compounds). The difference was attributable to the strong non-hydrophobic interactions between the polar molecules and soil. Interestingly, sorption kinetics of the polar sorbates to the soil organic matter-free soil, humic/fulvic acid-free soil, and extracted humic acids was very fast, indicating that different soil components played a synergetic role in the observed slow kinetics. We propose that slow sorption kinetics of highly polar sorbates stems mainly from the strong specific interactions (H-bonding, electron donor–acceptor interactions, etc.) with humic/fulvic acids; such specific interactions occur when sorbate molecules diffuse through humic/fulvic acids coiled, in relatively compressed confirmations, within the complex, tortuous, and porous soil matrices formed by mineral grains/particles and soil organic matter.

High-density polyethylene (HDPE) is a known sorbent for non-ionic organic compounds in technical applications. Nevertheless, there is little information available describing sorption to industrial HDPE for a broad range of compounds. With a better understanding of the sorption properties of synthetic polymers, environmental risk assessment would achieve a higher degree of accuracy, especially for microplastic interactions with organic substances. Therefore, a robust methodology for the determination of sorbent properties for non-ionic organic compounds by HDPE is relevant for the understanding of molecular interactions for both technical use and environmental risk assessment.In this work, sorption properties of HDPE material used for water pipes were characterized using a poly-parameter linear free-energy relationship (ppLFER) approach. Sorption batch experiments with selected probe sorbates were carried out in a three-phase system (air/HDPE/water) covering an aqueous concentration range of at least three orders of magnitude. Sorption in the concentration range below 10⁻² of the aqueous solubility was found to be non-linear and the Freundlich model was used to account for this non-linearity. Multiple regression analysis (MRA) using the determined distribution coefficients and literature-tabulated sorbate descriptors was performed to obtain the ppLFER phase descriptors for HDPE. Sorption properties of HDPE were then derived from the ppLFER model and statistical analysis of its robustness was conducted. The derived ppLFER model described sorption more accurately than commonly used single-parameter predictions, based i.e., on log Kₒ/w. The ppLFER predicted distribution data with an error 0.5 log units smaller than the spLFERs. The ppLFER was used for a priori prediction of sorption by the characterized sorbent material. The prediction was then compared to experimental data from literature and this work and demonstrated the strength of the ppLFER, based on the training set over several orders of magnitude.

The presence of microscale polymer particles (i.e., microplastics) in the environment has become a major concern in recent years. Sorption of organic compounds by microplastics may affect the phase distribution within both sediments and aqueous phases. To investigate this process, isotherms were determined for the sorption of seven aliphatic and aromatic organic probe sorbates by four polymers with different physico-chemical properties. Sorption increased in the order polyamide < polyethylene < polyvinylchloride < polystyrene. This order does not reflect the particle sizes of the investigated microplastics within the aqueous dispersions, indicating the influence of additional factors (e.g., π-π-interactions) on the sorption of aromatic compounds by polystyrene. Linear isotherms by polyethylene suggested that sorbate uptake was due to absorption into the bulk polymer. In contrast, non-linear isotherms for sorption by PS, PA, and PVC suggest a predominance of adsorption onto the polymer surface, which is supported by the best fit of these isotherms using the Polanyi-Manes model. A strong relationship between the sorption coefficients of the microplastics and the hydrophobicity of the sorbates suggests that hydrophobic interactions are of major importance.

Aided phytostabilization using a combination of compost, zerovalent iron grit and coal fly ash (CZA) amendments and revegetation effectively promoted the biological recovery of mining spoils generated at a gold mine in Portugal. Selective dissolution of spoil samples in combination with solid phase characterization using microbeam X-ray absorption near edge structure (μXANES) spectroscopy and microbeam X-ray fluorescence (μXRF) mapping were used to assess As associations in spoils ten years after CZA treatment. The results show that As preferentially associates with poorly crystalline Fe-oxyhydroxides as opposed to crystalline Fe-(oxyhydr)oxide phases. The crystalline Fe(III)-phases dominated in the treated spoil and exceeded those of the untreated spoil three-fold, but only 2.6–6.8% of total As was associated with this fraction. Correlation maps of As:Fe reveal that As in the CZA-treated spoils is primarily contained in surface coatings as precipitates and sorbates. Arsenic binding with poorly crystalline Fe-oxyhydroxides did not inhibit As uptake by plants.

To better understand interaction mechanisms of pine needles with persistent organic pollutants, single-solute and bi-solute sorption of phenanthrene and pyrene onto isolated cuticular fractions of pine needle were investigated. The structures of cuticular fractions were characterized by elemental analysis, Fourier transform infrared spectroscopy and solid-state 13C NMR. Polymeric lipids (cutin and cutan) exhibited notably higher sorption capabilities than the soluble lipids (waxes), while cellulose showed little affinity with sorbates. With the coexistence of the amorphous cellulose, the sorption of cutan (aromatic core) was completely inhibited, so the cutin components (nonpolar aliphatic moieties) dominated the sorption of bulk needle cuticle. By the consumption of the amorphous cellulose under acid hydrolysis, sorption capacities of the de-sugared fractions were dramatically enhanced, which controlled by the exposed aromatic cores and the aliphatic moieties. Furthermore, the de-sugared fractions demonstrated nonlinear and competitive sorption due to the specific interaction between aromatic cores and polycyclic aromatic hydrocarbon.

Sorption of 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) on a range of dealuminated zeolites were investigated to understand the mechanism of their sorption on microporous minerals, while the influence of common metal cations, solution pH, and humic acid was also studied. Sorption of chlorophenols was found to increase with the hydrophobicity of the sorbates and that of the microporous minerals, indicating the important role of hydrophobic interactions, while sorption was also stronger in the micropores of narrower sizes because of greater enhancement of the dispersion interactions. The presence of metal cations could enhance chlorophenol sorption due to the additional electrostatic attraction between metal cations exchanged into the mineral micropores and the chlorophenolates, and this effect was apparent on the mineral sorbent with a high density of surface cations (2.62 sites/nm²) in its micropores. Under circum-neutral or acidic conditions, neutral chlorophenol molecules adsorbed into the hydrophobic micropores through displacing the “loosely bound” water molecules, while their sorption was negligible under moderately alkaline conditions due to electrostatic repulsion between the negatively charged zeolite framework and anionic chlorophenolates. The influence of humic acid on sorption of chlorophenols on dealuminated Y zeolites suggests that its molecules did not block the micropores but created a secondary sorption sites by forming a “coating layer” on the external surface of the zeolites. These mechanistic insights could help better understand the interactions of ionizable chlorophenols and metal cations in mineral micropores and guide the selection and design of reusable microporous mineral sorbents for sorptive removal of chlorophenols from aqueous stream.

New, sustainable, and low-cost materials that can simultaneously remove a range of wastewater contaminants, such as heavy metals and pharmaceutical residues, are needed. In this work, modified biochars were produced by dip-coating hickory or bagasse biomass in carbon nanotube (CNT) suspensions with or without sodium dodecylbenzenesulfonate (SDBS)-aided dispersion prior to slow pyrolysis in a N₂ environment at 600 °C. The sulfapyridine (SPY) and lead (Pb) sorption ability of pristine hickory (HC) and bagasse (BC) biochars and the modified biochars with (HC-SDBS-CNT and BC-SDBS-CNT, respectively) and without (HC-CNT and BC-CNT) SDBS was assessed in laboratory aqueous batch single- and binary-solute system. The greatest removal of SPY and Pb was observed for HC-SDBS-CNT (86 % SPY and 71 % Pb) and BC-SDBS-CNT (56 % SPY and 53 % Pb), whereas HC-CNT, BC-CNT, and the pristine biochars removed far less. This can be attributed to the fact that surfactant could prevent the aggregation of CNTs and thus promote the distribution and stabilization of individual CNT nanoparticle on the biochar surface to adsorb the contaminants. The observation of no significant change in Pb sorption capacities of the surfactant-dispersed CNT-modified biochars in the presence of SPY, or vice versa, was indicative of site-specific sorption interactions and a lack of significant competition for functional groups by the two sorbates. These results suggest that products of hybrid technologies, such as biochars modified with CNTs, can yield multi-sorbents and may hold excellent promise as a sustainable wastewater treatment alternative.

The feasibility of using biochar as a sorbent to remove nine halogenated phenols (2,4-dichlorophenol, 2,4-dibromophenol, 2,4-difluorophenol, 2-chlorophenol, 4-chlorophenol, 2-bromophenol, 4-bromophenol, 2-fluorophenol, and 4-fluorophenol) and two pharmaceuticals (triclosan and ibuprofen) from water was examined through a series of batch experiments. Types of biochar, synthesized using various biomasses including fallen leaves, rice straw, corn stalk, used coffee grounds, and biosolids, were evaluated. Compared to granular activated carbon (GAC), most of the biochar samples did not effectively remove halogenated phenols or pharmaceuticals from water. The increase in pH and deprotonation of phenols in biochar systems may be responsible for its ineffectiveness at this task. When pH was maintained at 4 or 7, the sorption capacity of biochar was markedly increased. Considering maximum sorption capacity and properties of sorbents and sorbates, it appears that the sorption capacity of biochar for halogenated phenols is related to the surface area and carbon content of the biochar and the hydrophobicity of halogenated phenols. In the cases of triclosan and ibuprofen, the sorptive capacities of GAC, graphite, and biochars were also significantly affected by pH, according to the point of zero charge (PZC) of sorbents and deprotonation of the pharmaceuticals. Pyrolysis temperature did not affect the sorption capacity of halogenated phenols or pharmaceuticals. Based on the experimental observations, some biochars are good candidates for removal of halogenated phenols, triclosan, and ibuprofen from water and soil.