Refinar búsqueda
Resultados 1-10 de 48
Nanocomposites for Packaging Applications: Synthesis, Characterization, Thermal and Microbial Degradation of Its Residues for Plant Growth
2022
Abbasi, Zahra | Motamedi, Hossein | Zirrahi, Zinat | Taghavi, Mehdi | Farrokhnia, Abdolhadi | Aghaie, Ermia | Behnamian, Yashar
Environmental pollution, caused by traditional plastic packaging, has recently become more severe due to non-biodegradable nature of petroleum-based plastics. The present research studies the preparation of polyvinyl alcohol (PVOH)/Starch (ST)/Humic Acid (HA) contained sodium montmorillonite clay (MMT) as a plastic packaging method. It also investigates biodegradability of films in terms of microbial and thermal degradation and their residual effect on plant growth. For doing so, the research utilizes Broido Technique to obtain the activation energy of the films’ thermal degradation. The influence of HA/MMT ratio on the surface morphology and physical characteristics has also been assessed, using the Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscope (SEM), and thermogravimetric analysis (TA). After 12 days of microbial degradation, the total remaining solids are 32.12 wt% (PVOH/ST/HA (3%)/MMT (1%)); 48.17 wt% (PVOH/ST/HA (3%)/MMT (3%)), and 58.82 wt% (PVOH/ST/HA (1%)/MMT (3%)). The research shows that the highest activation energy for PVOH/ST/HA (3%)/MMT (3%) is 75 kJ/mol.
Mostrar más [+] Menos [-]Simultaneous observation of atmospheric peroxyacetyl nitrate and ozone in the megacity of Shanghai, China: Regional transport and thermal decomposition
2021
Zhang, Gen | Jing, Shengao | Xu, Wanyun | Gao, Yaqin | Yan, Chao | Liang, Linlin | Huang, Cheng | Wang, Hongli
Atmospheric peroxyacetyl nitrate (PAN) and ozone (O₃) are two typical indicators for photochemical pollution that have adverse effects on the ecosystem and human health. Observation networks for these pollutants have been expanding in developed regions of China, such as North China Plain (NCP) and Pearl River Delta (PRD), but are sparse in Yangtze River Delta (YRD), meaning their concentration and influencing factors remain poorly understood. Here, we performed a one-year measurement of atmospheric PAN, O₃, particulate matter with aerodynamic diameter smaller than 2.5 μm (PM₂.₅), nitrogen oxides (NOₓ), carbon monoxide (CO), and meteorological parameters from December 2016 to November 2017 in Shanghai. Overall, high hourly maximum PAN and O₃ were found to be 7.0 and 185 ppbv in summer, 6.2 and 146 ppbv in autumn, 5.8 and 137 ppbv in spring, and 6.0 and 76.7 ppbv in winter, respectively. Continental air masses probably carried atmospheric pollutants to the sampling site, while frequent maritime winds brought in less polluted air masses. Furthermore, positive correlations (R: 0.72–0.85) between PAN and O₃ were found in summer, indicating a predominant role of photochemistry in their formation. Unlike in summer, weak or no correlations between PAN and O₃ were featured during the other seasons, especially in winter, due to their different loss pathways. Unexpectedly, positive correlations between PAN and PM₂.₅ were found in all seasons. During summer, moderate correlation could be attributed to the strong photochemistry acting as a common driver in the formation of secondary aerosols and PAN. During winter, high PM₂.₅ might promote PAN production through HONO production, hence resulting in a good positive correlation. Additionally, the loss of PAN by thermal decomposition (TPAN) only accounted for a small fraction (ca. 1%) of the total (PAN + TPAN) during a typical winter episode, while it significantly reached 14.4 ppbv (71.1% of the total) in summer.
Mostrar más [+] Menos [-]Recent advances in the removal of persistent organic pollutants (POPs) using multifunctional materials:a review
2020
Sun, Bohua | Li, Qianqian | Zheng, Minghui | Su, Guijin | Lin, Shijing | Wu, Mingge | Li, Chuanqi | Wang, Qingliang | Tao, Yuming | Dai, Lingwen | Qin, Yi | Meng, Bowen
Persistent organic pollutants (POPs) have gained heightened attentions in recent years owing to their persistent property and hazard influence on wild life and human beings. Removal of POPs using varieties of multifunctional materials have shown a promising prospect compared with conventional treatments. Herein, three main categories, including thermal degradation, electrochemical remediation, as well as photocatalytic degradation with the use of diverse catalytic materials, especially the recently developed prominent ones were comprehensively reviewed. Kinetic analysis and underlying mechanism for various POPs degradation processes were addressed in detail. The review also systematically documented how catalytic performance was dramatically affected by the nature of the material itself, the structure of target pollutants, reaction conditions and treatment techniques. Moreover, the future challenges and prospects of POPs degradation by means of multiple multifunctional materials were outlined accordingly. Knowing this is of immense significance to enhance our understanding of POPs remediation procedures and promote the development of novel multifunctional materials.
Mostrar más [+] Menos [-]Transformation of gaseous 2-bromophenol on clay mineral dust and the potential health effect
2019
Wang, Yi | Peng, Anping | Chen, Zeyou | Jin, Xin | Gu, Cheng
Iron-bearing clays are ubiquitously distributed as mineral dusts in the atmosphere. Bromophenols were reported as the major products from thermal decomposition of the widely used brominated flame retardants (BFRs). However, little information is available for the reactivity of iron associated with mineral dusts to interact with the atmospheric bromophenols and the subsequent toxic effects. Herein, three common clay minerals (montmorillonite, illite and kaolinite) were used to simulate mineral dusts, and the reactions with gaseous 2-bromophenol were systematically investigated under environmentally relevant atmospheric conditions. Our results demonstrate that structural Fe(III) in montmorillonite and Fe(III) from iron oxide in illite mediated the dimerization of 2-bromophenol to form hydroxylated polybrominated biphenyl and hydroxylated polybrominated diphenyl ether. The surface reaction is favored to occur at moisture environment, since water molecules formed complex with 2-bromophenol and the reaction intermediates via hydrogen bond to significantly lower the reaction energy and promote the dimerization reaction. More importantly, the formed dioxin-like products on clay mineral dust increased the toxicity of the particles to A549 lung cell by decreasing cell survival and damaging cellular membrane and proteins. The results of this study indicate that not only mineral dust itself but also the associated surface reaction should be fully considered to accurately evaluate the toxic effect of mineral dust on human health.
Mostrar más [+] Menos [-]Brominated dioxins/furans and hydroxylated polybrominated diphenyl ethers: Occurrences in commercial 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and 2,4,6-tribromophenol, and formation during synthesis of BTBPE
2017
Ren, Man | Zeng, Hao | Peng, Ping-An | Li, Hui-Ru | Tang, Cai-Ming | Hu, Jian-Fang
Polybrominated dibenzo-p-dioxins (PBDDs) and hydroxylated polybrominated diphenyl ethers (OH-PBDEs) can be formed from bromophenols (BPs) by thermal degradation, biosynthesis or phototransformation. However, it is unknown whether PBDDs and OH-PBDEs can be formed during the chemical production processes that utilize BPs as raw materials. 2,4,6-tribromophenol (2,4,6-TBP) is an important raw material for the synthesis of 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), a novel brominated flame retardant. In this study, PBDDs, polybrominated dibenzofurans (PBDFs) and OH-PBDEs have been identified and quantified in commercially available BTBPE and 2,4,6-TBP. Furthermore, their formation as unintentional by-products during the laboratory synthesis of BTBPE from 2,4,6-TBP and 1,2-dibromoethane in the presence of sodium carbonate has also been investigated. 2,3,7,8-substituted PBDDs and PBDFs (2,3,7,8-PBDD/Fs) were undetectable in commercial samples of BTBPE and present in low levels (nanogram per gram) in 2,4,6-TBP. Two tetrabrominated dibenzo-p-dioxins (TeBDDs), namely 1,3,6,8- and 1,3,7,9-TeBDD, and three hydroxylated pentabrominated diphenyl ethers (OH-pentaBDEs), namely 4′-OH-BDE121, 2′-OH-BDE121, and 6′-OH-BDE100, were identified or tentatively identified, and quantitatively estimated to be at concentrations in the range of undetectable to several thousands of nanograms per gram in commercial BTBPE and 2,4,6-TBP. TeBDDs and OH-pentaBDEs were formed as by-products from 2,4,6-TBP during BTBPE synthesis. Further studies need to be conducted in order to determine whether PBDD/Fs and OH-PBDEs are also formed during the industrial synthesis of other chemical compounds that utilize BPs as raw materials or intermediates.
Mostrar más [+] Menos [-]Study on the remediation of tetracycline antibiotics and roxarsone contaminated soil
2021
Zhan, Lu | Xia, Zhiwen | Hsu, Chen-Min | Xie, Bing
Antibiotics are commonly used in livestock and poultry breeding along with organic arsenic. Through long-term accumulation, they can enter into the surrounding soil through various pathways and contaminate the soil. In this paper, tetracycline antibiotics (TCs) and roxarsone (ROX) contaminated soil were used as the representatives of the two kinds of veterinary drugs contaminated soil, respectively, to study the thermal desorption behavior and arsenic stabilization process. Different parameters like heating temperatures, heat duration, stabilizer type and dosage were optimized for effective removal of TCs and ROX. Furthermore, TCs and ROX removal path and ROX stabilization mechanism were explored. Results of the study showed that over 98% of tetracycline antibiotics and roxarsone were effectively removed at 300 °C for 60 min. The heat treatment process of TCs contaminated soil was controlled by the first-order kinetics. Based on the detection of degradation products and thermogravimetric analysis, the possible thermal degradation path of TCs and ROX was proposed. Addition of FeSO₄.7H₂O (10% by weight) as stabilizer during the heat treatment process yielded 96.7% stabilization rate. Through the analysis of arsenic fractions, valence and the characterization of soil samples collected after the heat treatment, mechanism of arsenic stabilization in ROX was explored. The results show that thermal treatment combined with chemical stabilization technology can not only degrade TCs and ROX efficiently and completely, but also convert organic arsenic into inorganic state, which is conducive to better stabilization, and finally achieve effective and safe remediation of this kind of contaminated soil.
Mostrar más [+] Menos [-]Co-combustion of anthracite coal and wood pellets: Thermodynamic analysis, combustion efficiency, pollutant emissions and ash slagging
2018
Guo, Feihong | Zhong, Zhaoping
This work presents studies on the co-combustion of anthracite coal and wood pellets in fluidized bed. Prior to the fluidized bed combustion, thermogravimetric analysis are performed to investigate the thermodynamic behavior of coal and wood pellets. The results show that the thermal decomposition of blends is divided into four stages. The co-firing of coal and wood pellets can promote the combustion reaction and reduce the emission of gaseous pollutants, such as SO₂ and NO. It is important to choose the proportion of wood pellets during co-combustion due to the low combustion efficiency caused by large pellets with poor fluidization. Wood pellets can inhibit the volatilization of trace elements, especially for Cr, Ni and V. In addition, the slagging ratio of wood pellets ash is reduced by co-firing with coal. The research on combustion of coal and wood pellets is of great significance in engineering.
Mostrar más [+] Menos [-]Fabrication of activated carbon supported modified with bimetallic-platin ruthenium nano sorbent for removal of azo dye from aqueous media using enhanced ultrasonic wave
2022
Herein, activated carbon supported modified with bimetallic-platin ruthenium nano sorbent (PtRu@AC) was synthesized by a thermal decomposition process and used in the removal of methylene blue (MB) from aqueous solutions. The synthesized nano sorbents were characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS) spectroscopic techniques. The data obtained from characterization studies showed that PtRu@AC nano sorbent was highly crystalline and in a form of PtRu alloy with a monodispersed composition. The results indicated that the maximum adsorption capacity (qemax) for the removal of MB with PtRu@AC under optimum conditions was detected to be 1.788 mmol/g (569.4 mg/g). The experimental kinetic results of the study revealed that the adsorption of methylene blue was found to be more compatible with the false second-order model compared to some tested models. Calculations for thermodynamic functions including enthalpy change (ΔHo), entropy change (ΔSo), and Gibbs free energy change (ΔGo) values were performed to get an idea about the adsorption mechanism. As a result, the synthesized PtRu@AC nano adsorbent was detected as a highly effective adsorbent material in the removal of MB from aquatic mediums.
Mostrar más [+] Menos [-]Textural, surface and chemical properties of polyvinyl chloride particles degraded in a simulated environment
2018
Tang, Chih-Cheng | Chen, Huey-Ing | Brimblecombe, Peter | Lee, Chon-Lin
Virgin polyvinyl chloride (PVC) particles were exposed to heat, ultraviolet B (UVB) and solar radiation either in artificial seawater or in air for different periods of time. The surface and chemical properties of fresh and degraded particle surfaces were determined via image analysis using scanning electron micrographs, a Brunauer-Emmett-Teller (BET) specific surface area analyzer and infrared spectroscopy. Thermal and UVB degradation resulted in unique PVC morphologies. In addition, the increased presences of functional groups were evident as dehydrochlorination and oxidation during the degradation process, which altered the chemical properties of PVC. In contrast, under solar exposure with or without seawater, unevenness to the surface was noted that seems to originate from degradation of the PVC surface; in addition, no new functional groups were found. This suggests that the chemical properties of PVC are stable over extended periods in the marine environment.
Mostrar más [+] Menos [-]Pollutant content in marine debris and characterization by thermal decomposition
2017
Iñiguez, M.E. | Conesa, J.A. | Fullana, A.
Marine debris (MDs) produces a wide variety of negative environmental, economic, safety, health and cultural impacts. Most marine litter has a very low decomposition rate (plastics), leading to a gradual accumulation in the coastal and marine environment. Characterization of the MDs has been done in terms of their pollutant content: PAHs, ClBzs, ClPhs, BrPhs, PCDD/Fs and PCBs. The results show that MDs is not a very contaminated waste. Also, thermal decomposition of MDs materials has been studied in a thermobalance at different atmospheres and heating rates. Below 400–500K, the atmosphere does not affect the thermal degradation of the mentioned waste. However, at temperatures between 500 and 800K the presence of oxygen accelerates the decomposition. Also, a kinetic model is proposed for the combustion of the MDs, and the decomposition is compared with that of their main constituents, i.e., polyethylene (PE), polystyrene (PS), polypropylene (PP), nylon and polyethylene-terephthalate (PET).
Mostrar más [+] Menos [-]