The number of products containing engineered nanomaterials (ENMs) has increased due to their high industrial relevance as well as their use in diverse consumer products. At the end of their life cycle ENMs might be released to the environment and therefore concerns arise regarding their environmental impact. In order to track their fate upon disposal, it is crucial to establish methods to trace ENMs in complex environmental samples and to differentiate them from naturally-occurring nanoparticles. The goal of this study was to distinctively trace ENMs by (non-invasive) detection methods. For this, fluorescent ENMs, namely quantum dots (QDs), were distinctively traced in complex aqueous matrices, and were still detectable after a period of two months using fluorescence spectroscopy. In particular, two water-dispersible QD-species, namely CdTe/CdS QDs with N-acetyl-l-cysteine as capping agent (NAC-QDs) and surfactant-stabilized CdSe/ZnS QDs (Brij®58-QDs), were synthesized to examine their environmental fate during disposal as well as their potential interaction with naturally-occurring substances present in landfill leachates. When QDs were spiked into a leachate from an old landfill site, alteration processes, such as sorption, aggregation, agglomeration, and interactions with dissolved organic carbon (DOC), led to modifications of the optical properties of QDs. The spectral signatures of NAC-QDs deteriorated depending on residence time and storage temperature, while Brij®58-QDs retained their photoluminescence fingerprints, indicating their high colloidal stability. The observed change in photoluminescence intensity was mainly caused by DOC-interaction and association with complexing agents, such as fulvic or humic acids, typically present in mature landfill leachates. For both QD-species, the results also indicated that pH of the leachate had no significant impact on their optical properties. As a result, the unique spectroscopic fingerprints of QDs, specifically surfactant-stabilized QDs, allowed distinctive tracing in complex aqueous waste matrices in order to study their long-term behavior and ultimate fate.

Owing to the production and use of chemicals in chemical industry parks (CIPs), these areas are considered to be highly polluted. However, the type of pollutants presents in the wastewater from CIPs and the risk posed to the environment due to the release of these pollutants remains unclear. In this study, suspect screening was combined with traceability analysis to determine the type of pollutants present in wastewaters at 9 chemical enterprises and wastewater treatment plants (WWTPs) in the CIPs. Additionally, the distribution of nine pollutants from the WWTPs’ effluent stage and the risk they posed to the surrounding river was examined through target analysis. Upon conducting suspect analysis, the presence of 65 and 64 chemicals in the 9 chemical enterprises’ wastewaters and WWTPs, respectively, was tentatively identified. Traceability analysis of the compounds screened in the effluent from the WWTPs determined that 41 substances were identified as characteristic pollutants of the chemical enterprises, indicating that the suspect screening strategy enabled relatively more efficient identification of the characteristic pollutants compared to traditional quantitative analysis. Targeting analysis combined with ecological risk assessment showed that metolachlor, carbendazim, atrazine, diuron, and chlorpyrifos posed relatively higher risks to aquatic organisms in the surrounding river. Therefore, the refined management of the wastewater treatment plant in the CIPs is necessary.

This article contains a brief overview of the European and Spanish environmental law framework for the prevention of soil contamination, for the management of contaminated soils and for consumers health protection in relation to agricultural crops. Some important aspects of the legislative framework for the prevention and management of soil contamination include recognising the possible risk to both human health and ecosystems that certain agricultural and industrial activities pose given the use of organic and inorganic chemical substances of a hazardous nature and pathogenic microorganisms. It is worth highlighting the milestone that many national constitutions include about the right to the environment. This right entails the obligation to protect it and to, therefore, protect soil from any degradation, including contamination. Legislation that protects soil from contamination and, consequently human health and ecosystems, is related mainly to agricultural activities (use of sewage sludge on farmlands, use of wastewater for irrigation, use of organic fertilisers and pesticides), and to industrial and commercial soil-contaminating activities. Consumer protection may be achieved through a legal system of environmental liability, specific measures to prevent contaminants entering soil, managing contaminated soils and a food traceability system. It is crucial to make the penalties for soil contamination offenses, and for violators of protective prohibitions, effective, proportionate and dissuasive. Global standards and guidelines on soil contamination could provide national legislative systems with substantive and procedural legal mechanisms to help prevent and manage soil contamination.

Mercury is a toxic compound to which humans are exposed by consumption of fish. Current fish consumption advisories focus on minimizing the risk posed by the species that are most likely to have high levels of mercury. Less accounted for is the variation within species, and the potential role of the geographic origin of a fish in determining its mercury level. Here we surveyed the mercury levels in 117 yellowfin tuna caught from 12 different locations worldwide. Our results indicated significant variation in yellowfin tuna methylmercury load, with levels that ranged from 0.03 to 0.82 μg/g wet weight across individual fish. Mean mercury levels were only weakly associated with fish size (R2 < 0.1461) or lipid content (R2 < 0.00007) but varied significantly, by a factor of 8, between sites. The results indicate that the geographic origin of fish can govern mercury load, and argue for better traceability of fish to improve the accuracy of exposure risk predictions.

Mercury (Hg) contamination testing was conducted on winter-caught male spiny dogfish (Squalus acanthias) in southern New England and results compared to available data on Hg concentrations for this species. A limited risk-reward assessment for EPA (eicosapentanoic acid) and DHA (docosahexanoic acid) lipid concentrations of spiny dogfish was completed in comparison with other commonly consumed marine fish. Mean Hg concentrations were 0.19ppm (±0.30) wet weight. In comparison, mean Hg concentrations in S. acanthias varied geographically ranging from 0.05ppm (Celtic Sea) to 2.07ppm (Crete, Mediterranean Sea). A risk-reward assessment for Hg and DHA+EPA placed S. acanthias in both “low-risk, high-reward” and “high-risk, high-reward” categories for consumption dependent on locations of the catch. Our results are limited and are not intended as consumption advisories but serve to illustrate the need for making more nuanced, geo-specific, consumption guidance for spiny dogfish that is inclusive of seafood traceability and nutritional benefits.

Contamination of the marine environment by human-made plastic litter is a growing and global problem. Our study attempts to explain the presence of two plastic bottles beached on the Ouvéa Island, in the southwest Pacific Ocean, with trademarks from the Solomon Islands and Papua New Guinea (PNG). We simulate the oceanic drift tracks and associated transit times with a Lagrangian interpretation of the surface currents of a high-resolution ocean model. Our results show that it takes less than 2–3months for drifting objects to connect these archipelagos (New Caledonia, Solomon Islands and PNG) and highlight the role of the meridional component of the circulation rather than the dominant zonal jets. This study shows that the origin or traceability of trash represent valuable information that can be used to test and, ultimately, improve our understanding of ocean circulation.

This study applied multivariate statistical analysis (MSA) to synthetic data simulated by a river water quality model to verify whether the MSA can correctly infer the pollution scenario assigned in the river water quality model. The results showed that when assessing the number and possible locations of pollution sources based on the results of cluster analysis (CA), two instead of three pollution point source were identified when considering the hydraulic variations of surface water. When discussing the principal component analysis (PCA) result, the second principal component (PC2) and the Pearson correlation coefficients among the pollutants should also be considered, which can infer that Cu, Pb, Cr, and Ni are contributed by the same pollutant point source, and Cu is also influenced by another pollutant point source. This result also implies that the solid and liquid partition coefficients (Kd) of pollutants can affect the interpretation of the PCA results, so the Kd values should be determined before tracing the pollution sources to facilitate the evaluation of the source characteristics and potential targets. This study established a working framework for surface water pollution traceability to enhance the effectiveness of pollution traceability.

Traceability offers significant information about the quality and safety of Chinese Angelica, a medicine and food homologous substance. In this study, a systematic four-step strategy, including sample collection, specific metal element fingerprinting, multivariate statistical analysis, and benefit-risk assessment, was developed for the first time to identify Chinese Angelica based on geographical origins. Fifteen metals in fifty-six Chinese Angelica samples originated from three provinces were analyzed. The multivariate statistical analysis model established, involving hierarchical cluster analysis (HCA), principal component analysis (PCA), and self-organizing map clustering analysis was able to identify the origins of samples. Furthermore, benefit-risk assessment models were created by combinational calculation of chemical daily intake (CDI), hazard index (HI), and cancer risk (CR) levels to evaluate the potential risks of Chinese Angelica using as traditional Chinese medicine (TCM) and food, respectively. Our systematic strategy was well convinced to accurately and effectively differentiate Chinese Angelica based on geographical origins.

Many parts of the vehicle cabin generate volatile organic compounds (VOCs), and some are hazardous and/or odorous to humans. In this study, VOCs in the inner liner of automobile spare tire, including raw rubbers and resins, were detected by gas chromatography-mass spectrometry (GC-MS) coupled with an extracting method of static headspace sampling (SHS). The results demonstrated that the sources of VOCs can be traced back to raw rubbers and resins: alkylphenol resins can release a large amount of 2,4,4-trimethyl-1-pentene and 2,2,4,6,6-pentamethyl-3-heptene; chlorobutyl rubber (CIIR) contained 3-methyl-pentane, and methyl-cyclopentane, and these VOCs are odorous. When alkylphenol resin and natural rubber (NR) with low VOCs were used to replace the corresponding resin and NR in the initial formulation, the total volatile organic compounds (TVOCs) in the inner liner could be reduced. We expected that the information gained from this work could provide a basic reference for the manufacture of environmental-friendly tire products.

The evidence of the impact of the mismanagement of plastic goods in the environment has captured the attention of scientists, policy makers and manufacturers. Urgent measures, regarding a combination of preventing plastic use and massively improving waste management, have been acclaimed by different stakeholders with the common goal to make a more resilient and competitive plastic industry. European Commission has pledged itself publishing the first EU-wide policy framework on plastics. The new recycling targets and calculation method put under pressure the current waste management system (WMS), characterized by fragmentation in responsibilities and underperforming cost-benefit balance. In addition, the public-private governance and the increasing number in waste consortia and platforms contribute to make the waste streams traceability challenging. The following study, resulting from a collaboration between the University of Bologna (UNIBO), the Emilia-Romagna Region (ERR), and the Regional Agency for Prevention, Environment and Energy (ARPAE), investigates the current panorama of plastic waste recycling system in ERR (Italy) with the aim to find out to what extent the current performance fulfils the future scenario established by the European Commission. The market of secondary plastics (SPs) has been investigated as well. The secondary resources, which are no longer waste, are not registered and monitored by official data collection scheme. Data extrapolated from official waste databases are integrated with results coming from individual questionnaire submitted to local recyclers. The identification of the main polymeric streams and, therefore, the exploitation of economic potential represent the preliminary actions to strategically plan an after-use plastic economy whose main goal is having all recyclable and/or recycled plastic packaging by 2030.