In recent years, increasing in energy demand and the importance of using energy with minimum green- house gas emission (GHG) leads researchers to study about renewable energy resources such as biomasses. Biomasses can be converted to biofuels by applying the appropriate technologies. In this study, a hybrid group fuzzy multi-criteria decision making (MCDM) approach based on step-wise weight assessment ratio analysis (SWARA), technique for order preference by similarity to ideal Solution (TOPSIS), additive ratio assessment (ARAS), weighted aggregated sum product assessment (WASPAS) and simple additive weighting (SAW) in the fuzzy environment is applied to rank biomasses in the case of Hormozgan province in Iran, because of being a coastal area and the access to different types of first, second and third generation resources of biofuel. After ranking these resources by mentioned methods, two aggregated multi-criteria decision making (MCDM) methods (mean rank method and Copeland method) are employed to prioritize these biomasses.  Results of mean rank show that municipal solid wastes (MSW), fish wastes and microalgae have the minimum average rank, respectively and the results of Copeland method show that MSW, fish wastes and microalgae have the maximum (wins-loses), respectively. So, these biomasses are the most suitable ones in biofuel production in this province.

Plastic pollution is a threat to the environment because of its slow degradation rate and high usage. The aim of this study is to isolate plastic degrading microorganisms from soils. The soil samples used for this study were collected from dumpsites filled with plastic and plastic materials and the effectiveness of the degradation of plastic materials was studied over a period of six (6) weeks in broth and agar culture under laboratory conditions by weight determination method. Physicochemical and microbiological analysis was carried out on the various soil samples using standard protocols. The biodegradation of polyvinylchloride (PVC) was done in-vitro using the microorganisms isolated from the soil. Microorganisms that were able to degrade a higher percentage of the plastic materials were; Staphylococcus aureus, Streptococcus sp, Bacillus sp, Escherichia coli Aspergillus niger, Aspergillus flavus and Trichoderma viridae. The total viable count for bacteria and fungi were within the range of 11.8x105 CFU/g to 2.0x1010 CFU/g and 3.3x105 CFU/g to 0.1x1011 CFU/g respectively. Staphylococcus aureus, Streptococcus sp, Bacillus sp, Micrococcus sp, Aspergillus niger, Aspergillus flavus, and Trichoderma viridae, degraded plastic up to 25%, 31.2%, 25% 31.2%, 12%, 10% and 10% respectively. These isolates may be used to actively degrade plastics, thereby reducing the rate of plastic pollution in our ecosystem.

International audience | While long-term organic fertilizer (OF) applications tend to decrease copper (Cu) and zinc (Zn) availability in agricultural soils, earthworm bioturbation has been reported to have the opposite effect. Thus, the consequences of OF amendments in earthworm-inhabited soils on Cu and Zn bioavailability to earthworms are still under debate. Here, we assessed the effect of a decade of agronomically realistic OF applications on Cu and Zn availability in earthworm-inhabited soils and the consequences on Cu and Zn bioavailability to earthworms. An epi-endogeic species (Dichogaster saliens) was exposed in microcosms to three field-collected soils that had received either no, mineral, or organic fertilization for a decade. Dissolved organic matter (DOM) properties (i.e., concentration, aromaticity, and binding properties toward Cu), pH, and Cu and Zn availability (i.e., total concentration and free ionic activity) were determined in the solution of the soil containing earthworms. Cu and Zn bioavailability was assessed by measuring the net accumulation (ng) and concentration of Cu and Zn in earthworms (mg kg(-1)). Despite soil Cu and Zn contamination induced by a decade of OF applications, organic fertilization induced an increase in soil pH and DOM properties that drove the reduction of Cu and Zn availability in earthworm-inhabited soils, while bioturbation had little effect on soil pH, DOM properties, and Cu and Zn availability. Consistently, Cu and Zn bioavailability to earthworms did not increase with OF applications. From an ecotoxicological perspective, our results suggest that agronomically realistic applications of OF for a decade should not pose a risk to earthworms in terms of Cu and Zn net accumulation, but further studies have to be undertaken to understand consequent long-term toxicity after exposure.

[Departement_IRSTEA]Ecotechnologies [TR1_IRSTEA]TED [ADD1_IRSTEA]Valoriser les effluents et déchets organiques | International audience | Waste management is a key environmental and socio-economic issue. Environmental concerns are encouraging the use of alternative resources and lower emissions to air, water and soil. Innovative technologies to deal with waste recovery that produce marketable bioproducts are emerging. Bioelectrochemical synthesis systems (BESs) are based on the primary principle of transforming organic waste into added-value products using microorganisms to catalyse chemical reactions. This technology is at the core of a research project called BIORARE (BIoelectrosynthesis for ORganic wAste bioREfinery), an interdisciplinary project that aims to use anaerobic digestion as a supply chain to feed a BES and produce target biomolecules. This technology needs to be driven by environmental strategies. Life Cycle Assessment (LCA) was used to evaluate the BIORARE concept based on expert opinion and prior experiments for the production of biosuccinic acid and waste management. A multidisciplinary approach based on biochemistry and process engineering expertise was used to collect the inventory data. The BES design and the two-step anaerobic digestion process have many potential impacts on air pollution or ecotoxicity-related categories. The comparison of the BIORARE concept with conventional fermentation processes and a water-fed BES technology demonstrated the environmental benefit resulting from the use of both the BES technology and a waste-based substrate as input thus supporting the BIORARE concept. Some trade-offs among the impact categories were identified but led to options to improve the concept. BES design and synergy management may improve the environmental performance of the BIORARE concept

Halogenated flame retardants (HFRs) were measured in 470 waste plastic articles from Ireland between 2019 and 2020. We identified articles containing concentrations of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCDD), and tetrabromobisphenol-A (TBBP-A) exceeding European Union limits. Enforcement of existing limits of 1000 mg/kg will render an estimated 3.1% (2800 t) of articles in the waste categories studied unrecyclable, increasing to: 4.0, 4.9, and 5.6% if limits were reduced to 500, 200, and 100 mg/kg respectively. Meanwhile, enforcing limits of 1,000, 500, 200, and 100 mg/kg will respectively remove 78, 82, 84, and 85% of PBDEs, HBCDD, and TBBP-A present in such waste. Other FRs targeted were detected infrequently and predominantly at very low concentrations. However, 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) was detected in 3 display/IT product samples at 14,000 to 32,000 mg/kg, indicating elevated concentrations of FRs used as alternatives to PBDEs and HBCDD, will likely increase in future. Comparison with data for Ireland in 2015–16, revealed concentrations and exceedances of limits for PBDEs, HBCDD, and TBBP-A were similar or have declined. For end-of-life vehicle fabrics and foams, HBCDD and ΣPBDE concentrations declined significantly (p < 0.05) since 2015–16. Moreover, ΣPBDE concentrations in waste small domestic appliances are significantly lower in 2019–20, with a similarly significant decline for TBBP-A in waste IT and telecommunications articles. In contrast, HBCDD concentrations in waste extruded polystyrene increased significantly between 2015–16 and 2019–20. For other waste categories studied, no statistically significant temporal trends are evident (p > 0.05). Fewer samples exceeded PBDE and HBCDD limits in 2019–20 (7.8%) than 2015–16 (8.7%), while exceedances for TBBP-A fell from 2.4% in 2015–16 to 0.57% in 2019–20. While comparison between the 2015–16 and 2019-20 datasets provide a preliminary indication of changes, further monitoring is required if the impact of legislation designed to eliminate HFRs from the waste stream is to be fully evaluated.

Photoaging is an important reaction for waste plastics in the aquatic environment and plays a key role in the lifetime of plastics. Nevertheless, when natural photosensitive substances such as nitrate participate in this process, the physiochemical changes in plastics and the corresponding reaction mechanisms are not well-understood. In this work, the photochemical behavior of polyethylene terephthalate (PET) bottles in deionized water and nitrate solution was systematically investigated under ultraviolet (UV) irradiation. The analyses of the surface physicochemical properties of the photoaged PET bottles indicated that, after 20 days of photo-irradiation, the presence of nitrate reduced the contact angle from 69.8 ± 0.9° to 60.0 ± 0.3°, and increased the O/C ratio from 0.23 to 0.32, respectively. The leaching rate of dissolved organic carbon (DOC), which was 0.0193 mg g⁻¹·day⁻¹ in nitrate solution, was twice that of 0.00941 mg g⁻¹·day⁻¹ in deionized water. Furthermore, fluorescence spectroscopy revealed that the increasing DOC had aromatic rings with hydroxyl on the side-chain formed after UV irradiation. The positive effect of nitrate on the degradation of PET bottles was mainly through the generation of hydroxyl radicals that were produced through the photolysis of nitrate. In addition, two-dimensional correlation spectroscopy analysis showed that the chain scission of PET plastics could be initiated by nitrate-induced ·OH attacking the carbon-oxygen bonds instead of forming peroxides with oxygen. This work elucidates the mechanism of photodegradation of plastics that was induced by nitrate and highlights the important role of natural photosensitive substances in the photoaging process of plastics.

The immense production of plastic polymers combined with their discordancy with nature has led to vast plastic waste contamination across the geosphere, from the oceans to freshwater reservoirs, wetlands, remote snowpacks, sediments, air and multiple other environments. These environmental pollutants include microplastics (MP), typically defined as small and fragmented plastics less than 5 mm in size, and nanoplastics (NP), particles smaller than a micrometer. The formation of micro and nanoplastics in aqueous media to date has been largely attributed to fragmentation of plastics by natural (i.e., abrasion, photolysis, biotic) or industrial processes. We present a novel method to create small microplastics (≲ 5 μm) and nanoplastics in water from a wide variety of plastic materials using a small volume of a solubilizer liquid, such as n-dodecane, in combination with vigorous mixing. When the suspensions or solutions are subjected to ultrasonic mixing, the particle sizes decrease. Small micro- and nanoparticles were made from commercial, real world and waste (aged) polyethylene, polystyrene, polycarbonate and polyethylene terephthalate, in addition to other plastic materials and were analyzed using dark field microscopy, Raman spectroscopy and particle size measurements. The presented method provides a new and simple way to create specific size distributions of micro- and nanoparticles, which will enable expanded research on these plastic particles in water, especially those made from real world and aged plastics. The ease of NP and small MP formation upon initial mixing simulates real world environments, thereby providing further insight into the behavior of plastics in natural settings.