Refinar búsqueda
Resultados 1-10 de 76
Environmental and individual PAH exposures near rural natural gas extraction
2018
Paulik, L Blair | Hobbie, Kevin A. | Rohlman, Diana | Smith, Brian W. | Scott, Richard P. | Kincl, Laurel | Haynes, Erin N. | Anderson, Kim A.
Natural gas extraction (NGE) has expanded rapidly in the United States in recent years. Despite concerns, there is little information about the effects of NGE on air quality or personal exposures of people living or working nearby. Recent research suggests NGE emits polycyclic aromatic hydrocarbons (PAHs) into air. This study used low-density polyethylene passive samplers to measure concentrations of PAHs in air near active (n = 3) and proposed (n = 2) NGE sites. At each site, two concentric rings of air samplers were placed around the active or proposed well pad location. Silicone wristbands were used to assess personal PAH exposures of participants (n = 19) living or working near the sampling sites. All samples were analyzed for 62 PAHs using GC-MS/MS, and point sources were estimated using the fluoranthene/pyrene isomer ratio. ∑PAH was significantly higher in air at active NGE sites (Wilcoxon rank sum test, p < 0.01). PAHs in air were also more petrogenic (petroleum-derived) at active NGE sites. This suggests that PAH mixtures at active NGE sites may have been affected by direct emissions from petroleum sources at these sites. ∑PAH was also significantly higher in wristbands from participants who had active NGE wells on their properties than from participants who did not (Wilcoxon rank sum test, p < 0.005). There was a significant positive correlation between ∑PAH in participants' wristbands and ∑PAH in air measured closest to participants’ homes or workplaces (simple linear regression, p < 0.0001). These findings suggest that living or working near an active NGE well may increase personal PAH exposure. This work also supports the utility of the silicone wristband to assess personal PAH exposure.
Mostrar más [+] Menos [-]Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan
2017
Junaid, Muhammad | Malik, Riffat Naseem | Pei, De-Sheng
Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals’ exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation.
Mostrar más [+] Menos [-]Polybrominated diphenyl ethers in indoor and outdoor dust from Southeast Asia: An updated review on contamination status, human exposure, and future perspectives
2021
Hoang, Anh Quoc | Tran, Tri Manh | Tu, Minh Binh | Takahashi, Shin
Contamination status, potential emission sources, environmental fate, and human exposure risk of polybrominated diphenyl ethers (PBDEs) are reviewed for indoor and outdoor dust from Southeast Asian countries, under an international comparison point of view. PBDEs have been widely detected in house, workplace, car, and road dust samples collected from Indonesia, Philippines, Singapore, Thailand, and Vietnam. The highest PBDE levels up to hundreds of μg/g were found in settled dust from some e-waste processing areas in Thailand and Vietnam. Concentrations of PBDEs in house, car, and road dust from this region were generally lower than those reported in China and Western developed countries. BDE-209 was the most predominant congener in almost all analyzed samples, reflecting the widespread application of materials and products treated with commercial deca-BDE mixtures in this region. The market demand and application rate of commercial PBDE mixtures in Southeast Asia were lower than those documented for other regions in the world. As a result, PBDE contamination levels in the environments (e.g., indoor and outdoor dust) and associated risks in these countries were not significantly high. However, more attention should be paid to informal processing activities and management strategies for modern wastes such as e-waste, plastics, and end-of-life vehicles. There exist several knowledge gaps about spatiotemporal trends, potential sources, risk assessment, inventory, management, and legislation regarding PBDEs in dust from this region, which should be filled by additional comprehensive, detailed studies with relevant inter-country/regional monitoring schemes.
Mostrar más [+] Menos [-]Dissemination of blaNDM-5 via IncX3 plasmids in carbapenem-resistant Enterobacteriaceae among humans and in the environment in an intensive vegetable cultivation area in eastern China
2021
Zhao, Qian | Berglund, Björn | Zou, Huiyun | Zhou, Ziyu | Xia, Huiyu | Zhao, Ling | Nilsson, Lennart E. | Li, Xuewen
The environment of a large-scale vegetable production area can be exposed to antibiotic residues and antibiotic-resistant bacteria (ARB) via animal manure and irrigation with contaminated water, which can facilitate the dissemination of ARB. However, the occurrence of ARB in plantation areas and their dissemination in this environment remain largely unexplored. In total, 382 samples including those from vegetable (n = 106), soil (n = 87), well water (n = 24), river water (n = 20), river sediments (n = 20), farmer feces (n = 58) and farmer hands (n = 67) were collected in 2019 from a large-scale cultivation area in Shandong, China. Selective agar plates were used to screen for carbapenem-resistant Enterobacteriaceae (CRE) and whole-genome sequencing and Southern blotting were used to characterise isolates and mobile genetic elements carrying carbapenem resistance determinants. A total of nine NDM-5-producing isolates of Escherichia coli, Klebsiella pneumoniae, and Citrobacter spp. were identified from environmental sources and human feces, all of which were multidrug-resistant. Single nucleotide polymorphism analysis suggested clonal transmission of carbapenem-resistant Citrobacter sedlakii within greenhouse soils in the area. Eight of the isolates carried closely related or identical IncX3 plasmids carrying blaNDM₋₅, which were shown to be conjugative via filter mating experiments, indicating the highly transmissible nature of this genetic element. Isolates of E. coli and Citrobacter freundii were detected in the feces of local farm workers and contained similar IncX3 plasmids with blaNDM₋₅ environmental isolates, suggesting a potential risk of CRE transfer from the work environment to the farm workers. Thus, further research is required to investigate the potential health risks associated with environmental exposure to CRE in vegetable cultivation areas.
Mostrar más [+] Menos [-]Pulmonary exposure to metal fume particulate matter cause sleep disturbances in shipyard welders
2018
Chuang, Hsiao-Chi | Su, Ting-Yao | Chuang, Kai-Jen | Hsiao, Ta-Chih | Lin, Hong-Ling | Hsu, Yuan-Ting | Pan, Chih-Hong | Lee, Kang-Yun | Ho, Shu-Chuan | Lai, Ching-Huang
Sleep disorders may pose a risk to workers in the workplace. We aimed to investigate the associations between metal fume fine particulate matter (PM2.5) and sleep quality in workers. We assessed the effects of personal exposure to metal fume PM2.5 on lung functions, urinary biomarkers, and sleep quality in shipyard welding workers. In total, 96 welding workers and 54 office workers were recruited in the present study; office workers were exposed to 82.1 ± 94.1 μg/m³ PM2.5 and welding workers were exposed to 2166.5 ± 3149.1 μg/m³. Welding workers had significantly lower levels of FEV25-75 than office workers (p < 0.05). An increase in 1 μg/m³ PM2.5 was associated with a decrease of 0.003 ng/mL in urinary serotonin (95% CI = −0.007–0.000, p < 0.05) in all workers and with a decrease of 0.001 ng/mL in serotonin (95% CI = −0.004–0.002, p < 0.05) in welding workers, but these were not observed in office workers. There was no significant association of PM2.5 with urinary cortisol observed in any workers. Urinary serotonin was associated with urinary Cu, Mn, Co, Ni, Cd, and Pb. Urinary cortisol was associated with Cu, Mn, Co, Ni, Cd, and Pb. Sixteen subjects were randomly selected from each of the office and welding workers for personal monitoring of sleep quality using a wearable device. We observed that welding workers had greater awake times than did office workers (p < 0.05). Our study observed that exposure to heavy metals in metal fume PM2.5 may disrupt sleep quality in welding workers.
Mostrar más [+] Menos [-]Development of a calibration chamber to evaluate the performance of low-cost particulate matter sensors
2019
Sayahi, T. | Kaufman, D. | Becnel, T. | Kaur, K. | Butterfield, A. | Collingwood, S. | Zhang, Y. | Gaillardon, P.-E. | Kelly, K.E.
Low-cost particulate matter (PM) air quality sensors are becoming widely available and are being increasingly deployed in ambient and home/workplace environments due to their low cost, compactness, and ability to provide more highly resolved spatiotemporal PM concentrations. However, the PM data from these sensors are often of questionable quality, and the sensors need to be characterized individually for the environmental conditions under which they will be making measurements. In this study, we designed and assessed a cost-effective (∼$700) calibration chamber capable of continuously providing a uniform PM concentration simultaneously to multiple low-cost PM sensors and robust calibration relationships that are independent of sensor position. The chamber was designed and evaluated with a Computational Fluid Dynamics (CFD) model and a rigorous experimental protocol. We then used this new chamber to calibrate 242 Plantower PMS 3003 sensors from two production lots (Batches I and II) with two aerosol types: ammonium nitrate (for Batches I and II) and alumina oxide (for Batch I). Our CFD models and experiments demonstrated that the chamber is capable of providing uniform PM concentration to 8 PM sensors at once within 6% error and with excellent reliability (intraclass correlation coefficient > 0.771). The study identified two malfunctioning sensors and showed that the remaining sensors had high linear correlations with a DustTrak monitor that was calibrated for each aerosol type (R2 > 0.978). Finally, the results revealed statistically significant differences between the responses of Batches I and II sensors to the same aerosol (P-value<0.001) and the Batch I sensors to the two different aerosol types (P-value<0.001). This chamber design and evaluation protocol can provide a useful tool for those interested in systematic laboratory characterization of low-cost PM sensors.
Mostrar más [+] Menos [-]Concentrations of polybrominated diphenyl ethers (PBDEs) in central air-conditioner filter dust and relevance of non-dietary exposure in occupational indoor environments in Greece
2014
Besis, Athanasios | Katsoyiannis, Athanasios | Botsaropoulou, Elisavet | Samara, Constantini
Polybrominated Diphenyl Ethers (PBDEs) are ubiquitous in the indoor environment owing to their use in consumer products and various studies around the world have found higher concentrations indoors than outdoors. Central air conditioner (A/C) systems have been widely used in many workplaces, therefore, studying of PBDEs in central A/C filter dust is useful to better understand the occurrences and health implications of PBDEs in indoor environments. The present study examined the occurrence of PBDEs in central A/C filter dust collected from various workplaces (n = 20) in Thessaloniki, Greece. The sum concentrations of 21 target congeners (∑21PBDE) in A/C dust ranged between 84 and 4062 ng g−1 with a median value of 1092 ng g−1, while BDE-209 was found to be the most abundant BDE congener. The daily intake via dust ingestion of PBDEs estimated for the employees of the occupational settings ranged from 3 to 45 ng day−1 (median 12 ng day−1).
Mostrar más [+] Menos [-]Polybrominated diphenyl ethers (PBDEs) in the indoor and outdoor environments – A review on occurrence and human exposure
2012
Besis, Athanasios | Samara, Constantini
Polybrominated diphenyl ethers (PBDEs) constitute an important group of brominated flame retardants that have been massively produced and extensively used in numerous everyday products, providing longer escape times in case of fire and thus saving lives, as well as reducing the damage of property. In recent years, PBDEs have been recognized as significant pollutants of the indoor environment. This article provides a synthesis and critical evaluation of the state of the knowledge about the occurrence of PBDEs in the indoor environment (air and dust in homes, workplaces and cars) in different countries in Europe, North America, Asia and Australia, as well as about the human exposure via indoor air inhalation and dust ingestion in comparison to outdoor air inhalation and dietary intake.
Mostrar más [+] Menos [-]Health Effects of Occupational Noise
2021
Pretzsch, Anna | Seidler, Andreas | Hegewald, Janice
PURPOSE OF REVIEW: Workplace noise negatively impacts health, and noise-induced hearing loss is the most common work-related disease in many countries. Occupational noise may also cause cardiovascular disease, and there is epidemiologic evidence on the non-auditory effects of noise. This paper aims to briefly present and summarize the latest evidence on the auditory and non-auditory health effects of occupational noise exposure from the last 5 years. RECENT FINDINGS: Two systematic reviews assessing the cardiovascular effects of occupational noise exposure were published in the last year. Our own recent review found convincing evidence of an association between occupational noise exposure > 80 dB(A) and hypertension and a dose-response relationship between noise exposure and hypertension risk. Another review of cardiovascular disease conducted by the World Health Organization (WHO) and the International Labour Organization (ILO) found an increased risk of incident ischemic heart disease at noise exposures ≥ 85 dB(A). Recent reviews on work-related injuries, diabetes, acoustic neuroma, and pregnancy outcomes also find noise-related associations. Evidence of an association between occupational noise and cardiovascular outcomes was recently evaluated. We found the risk of hypertension increases with a clear dose-response relationship at noise levels > 80 dB(A). The WHO/ILO review highlights the lack of quality research including women. Additional high-quality research on epigenetic effects, oxidative stress, work-related injuries, diabetes, acoustic neuroma, and pregnancy outcomes is also needed. Urgently needed (increased) measures of workplace noise reduction will reduce the incidence of noise-induced hearing loss and help prevent cardiovascular diseases, especially hypertension.
Mostrar más [+] Menos [-]Biomonitoring of 2,4’–methylene diphenyldianiline for assessment of exposure to methylene diphenyl diisocyanate aerosol
2013
Mirmohammadi, Seyedtaghi | Najafpour, Ghasem | Ahmad, Anees | Hakimi, Ibrahim
The exposure to methylene diphenyl diisocyanate (MDI) aerosol was investigated by biomnitoring of 2,4’–methylene diphenyldianiline (MDA) in urines of exposed workers. Biological monitoring was done for its metabolite by the analysis of isocyanate–derived diamines released from protein adducts in urine or plasma by GC–MS. The urine samples, at the end of working shifts of polyurethane factory, were collected in polystyrene bottles containing 10 g citric acid, and stored at 4 °C until analysis. The mean concentration values of MDA in the five selected factories were in the range of 3.01 to 3.58 µmol/mol creatinine for all subjects and the highest mean value of MDI concentration was 99 µg/m³ from indoor air samples analysis. The results show a linear relationship between MDI and MDA concentrations with a value of R2=0.801 (P<0.05). This study demonstrates that not only urinary MDA is detectable following diisocyanates aerosol exposure but also it is likely to be a useful practical biomarker to monitor diisocyanates exposure in the workplaces or for the epidemiologic studies.
Mostrar más [+] Menos [-]