PURPOSE: PCDD/Fs, PCBs, and PAHs, ubiquitous environmental pollutants which are part of the POPs, are mainly produced by anthropogenic activities as well as by natural processes. Occurrences of these pollutants in different sites in Trieste are presented. PCDD/Fs distribution and their possible emission sources are discussed. METHODS: Air samples were collected in different sites near the industrial area, in the city center, and in a background area, using a high-volume sampler equipped with a quartz fiber filter and a PUF. Each sampling lasted a week. RESULTS: The concentrations of the organochlorinated pollutants are consistent with literature data (ΣPCDD/Fs and Σdl-PCBs were 5–38 fg TEQ/Nm3 and 4–31 fg TEQ/Nm3, respectively), and an apparent seasonal trend was found with slightly higher concentrations in the winter and lower levels in both summer campaigns. Moreover, the isomer profile of each sampling campaign was compared to the fingerprint of a sintering plant, a cement plant, and an incinerator, the main industrial activities in Trieste. CONCLUSIONS: The organic micropollutants were detected in levels consistent with literature data. The results show that the pollutants are uniformally distributed in the atmosphere of Trieste. PCDD/F fingerprints in each site remained almost identical during summer and winter, confirming the yearly prevalence of the emissions from the nearby sintering plant.

PURPOSE: To examine (1) the effect of organic (poultry manure) and inorganic (residue mud and phosphogypsum) amendments on nutrient leaching losses from residue sand and (2) whether amendments improve the growth of plants in residue sand. METHODS: Leaching columns were established using residue sand. The phosphogypsum-treated surface layer (0–15 cm) was amended with poultry manure and/or bauxite residue mud and the subsurface layer (15–45 cm) was either left untreated or amended with phosphogypsum. RESULTS: Much of the Na+, K+, Cl− and SO 4 2− was lost during the first four leachings. Additions of phosphogypsum to both surface and subsurface layers resulted in partial neutralization of soluble alkalinity. Mean pH of leachates ranged from 8.0 to 8.4, the major cation leached was Na+ and the major balancing anion was SO 4 2− . Where gypsum was not applied to the subsurface, mean pH of leachates was 10.0–10.9, the main cation leached was still Na+ and the main balancing anions were a combination of SO 4 2− and HCO 3 − /CO 3 2− . At the end of the experiment, concentrations of exchangeable Na+ in the subsurface layers were similar regardless of whether gypsum had been applied to that layer or not. Yields of Acacia saligna were promoted by additions of poultry manure to the surface layer but unaffected by gypsum incorporation into the subsurface layer. CONCLUSIONS: Lack of reaction of phosphogypsum with the subsurface layer is unlikely to be a major factor limiting revegetation of residue sand since in the absence of phosphogypsum the excess Na+ leaches with the residual alkalinity (HCO 3 − /CO 3 2− ) rather than SO 4 2− .

Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental horizontal subsurface flow (HSSF), gravel-based constructed wetlands (CWs) and challenged by treated dairy processing factory wastewater with a median electrical conductivity of 8.9 mS cm−1. The hydraulic loading rate was tested at 3.75 cm day−1. In general, the plants grew well during the 7-month study period, with no obvious signs of salt stress. The major water quality parameters monitored (biological oxygen demand (BOD), suspended solids (SS) and total nitrogen (TN) but not total phosphorus) were generally improved after the effluent had passed through the CWs. There was no significance different in removal efficiencies between the planted beds and unplanted gravel beds (p > 0.007), nor was there any significant difference in removal efficiencies between the A. donax and P. australis beds for most parameters. BOD, SS and TN removal in the A. donax and P. australis CWs was 69, 95 and 26 % and 62, 97 and 26 %, respectively. Bacterial removal was observed but only to levels that would allow reuse of the effluent for use on non-food crops under Victorian state regulations. As expected, the A. donax CWs produced considerably more biomass (37 ± 7.2 kg wet weight) than the P. australis CWs (11 ± 1.4 kg wet weight). This standing crop equates to approximately 179 and 68 tonnes ha−1 year−1 biomass (dry weight) for A. donax and P. australis, respectively (assuming a 250-day growing season and single-cut harvest). The performance similarity of the A. donax and P. australis planted CWs indicates that either may be used in HSSF wetlands treating dairy factory wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilisation of the biomass produced.

INTRODUCTION AND AIMS: A review was undertaken on the occurrence, toxicity, and degradation of triclosan (TCS; 5-chloro-2,4-dichlorophenoxy)phenol) in the environment. TCS is a synthetic, broad-spectrum antibacterial agent incorporated in a wide variety of household and personal care products such as hand soap, toothpaste, and deodorants but also in textile fibers used in a range of other consumer products (e.g., toys, undergarments and cutting boards among other things). OCCURRENCE: Because of its partial elimination in sewage treatment plants, most reports describe TCS as one of the most commonly encountered substances in solid and water environmental compartments. It has been detected in a microgram per liter or microgram per kilogram level in sewage treatment plants (influents, effluents, and sludges), natural waters (rivers, lakes, and estuarine waters), and sediments as well as in drinking water. TOXICITY: Moreover, due to its high hydrophobicity, TCS can accumulate in fatty tissues and has been found in fish and human samples (urine, breast milk, and serum). TCS is known to be biodegradable, photo-unstable, and reactive towards chlorine and ozone. DISCUSSION: As a consequence, it can be transformed into potentially more toxic and persistent compounds, such as chlorinated phenols and biphenyl ethers after chlorination, methyl triclosan after biological methylation, and chlorinated dibenzodioxins after photooxidation. The toxicity of TCS toward aquatic organisms like fish, crustaceans, and algae has been demonstrated with EC50 values near TCS environmental concentrations. It has even been shown to produce cytotoxic, genotoxic, and endocrine disruptor effects. CONCLUSION: Furthermore, the excessive use of TCS is suspected to increase the risk of emergence of TCS-resistant bacteria and the selection of resistant strains.

BACKGROUND, AIM, AND SCOPE: The purpose of this study was to monitor and present the heavy metal concentrations in the blood of residents of areas near municipal waste incinerators (MWIs), who are more prone to environmental pollution. We also sought to compare and analyze the residents’ perception of environmental pollution as one of the factors affecting heavy metal concentrations in the blood using a survey about the perceived damage caused by the facilities. Since heavy metal levels in the blood can be affected not only by local environmental pollution but also by personal and occupational factors, heavy metal levels in the blood need to be verified and consistently monitored. METHODS: Residents who live within 300 m of MWIs in Seoul are acknowledged to be under indirect influence according to the Waste Disposal Act. A survey was given to 841 residents living within 300 m of a MWI from 2006 to 2009. The concentrations of heavy metals (lead, cadmium, and mercury) in the blood were measured in the 841 surveyed residents and in 105 residents in reference areas. Additionally, the perception of the damage caused by municipal waste incinerators was investigated using scores from 1 to 5 on a Likert scale. RESULTS: The measurements of the heavy metal concentrations in the blood showed that the mean concentrations of lead, cadmium, and mercury were 43.1, 1.7, and 1.3 ug/L, respectively. The blood levels of lead and cadmium were slightly higher in the group of the subjects who had resided the longest near the municipal waste incinerators. When compared with the domestic investigation by the Ministry of Environment, the concentrations of lead and cadmium were a little higher, while that of mercury was a little lower. Overall, there was no significant difference in the distribution of heavy metal levels in the blood among age groups. Additionally, the investigation of the perceived damage from municipal waste incinerators showed that the subjects

INTRODUCTION: While the literature is replete with studies of the toxic potency of pentachlorophenol (PCP), site-specific criteria for native aquatic species that can be used in ecological risk assessments has been lacking and application of toxicity information for non-native species is controversial. MATERIALS AND METHODS: In the present study, acute and chronic toxicities of PCP to six aquatic species native to the Yangtze River were determined. The HC5 and HC50 (hazardous concentration for 5% and 50% of species) were derived from dose–response curves for these native aquatic species and were then compared with those derived for non-native species. RESULTS: The acute toxicity values for the native species ranged from 8.8 × 10−2 mg l−1 (Plagiognathops microlepis) to 1.1 mg l−1 (Soirodela polyrhiza), while chronic toxicity values based on no observed effect concentrations (NOECs) ranged from 0.01 mg l−1 (Macrobrachium superbum) to 0.25 mg l−1 (Soirodela polyrhiza). Native aquatic benthos was more sensitive to acute PCP exposure than non-native species. There was no significant difference in NOECs derived from native fish species and those based on non-native fish species. The median acute HC5 and HC50 derived from the toxicity data of native taxa were both less than those derived from non-native taxa. There was no significant difference between chronic HC5s derived from the two sets of taxa. However, the median chronic HC50 derived from native taxa was less than that derived from non-native taxa. CONCLUSION: The study upon which we report here provides site-specific toxicity information developed for native species which can be used for the protection of local aquatic life from a common contaminant, PCP.

PURPOSE: Feathers are one of the most abundant bioresources. They are discarded as waste in most cases and could cause environmental pollution. On the other hand, keratin constituted by amino acids is the main component of feathers. In this article, we reported on biorefined feathers and integrants and application of degraded products. MATERIALS AND METHODS: The fermentation of whole chicken feathers with Stenotrophomonas maltophilia DHHJ in a scale-up of a 5-L bioreactor was investigated in this article. The fermentation process was controlled at 0.08 MPa pressure, 2.5 L/min airflow, and 300 rpm as 100% oxygen saturation level, 40°C, and pH 7.8. RESULTS: Feathers were almost completely degraded in the tested fermentation reaction with the following conditions: 80 g of whole feathers in 3 L fermentation broth for 72 h, seed age of 16 h, 100 mL inoculation amount, and 50% oxygen saturation level. The degraded products contain 397.1 mg/L soluble protein that has mass weight ranging from 10 to 160 kD, 336.9 mg/L amino acids, and many kinds of metal ions. The fermentation broth was evaluated as leaf fertilizer and found to increase plant growth to 82% or 66% for two- or fourfold dilutions, respectively. In addition, in a hair care assay, the broth showed a hair protective function by increasing weight, flexibility, and strength of the treated hair. CONCLUSIONS: The whole feathers were degraded completely by S. maltophilia DHHJ. The degraded product includes many factors to life, such as peptides, amino acids, and mineral elements. It could be applied as leaf fertilizer and hair care product.

INTRODUCTION: This study proposes three methodologies to define artificial neural network models through genetic algorithms (GAs) to predict the next-day hourly average surface ozone (O3) concentrations. GAs were applied to define the activation function in hidden layer and the number of hidden neurons. METHODS: Two of the methodologies define threshold models, which assume that the behaviour of the dependent variable (O3 concentrations) changes when it enters in a different regime (two and four regimes were considered in this study). The change from one regime to another depends on a specific value (threshold value) of an explanatory variable (threshold variable), which is also defined by GAs. The predictor variables were the hourly average concentrations of carbon monoxide (CO), nitrogen oxide, nitrogen dioxide (NO2), and O3 (recorded in the previous day at an urban site with traffic influence) and also meteorological data (hourly averages of temperature, solar radiation, relative humidity and wind speed). The study was performed for the period from May to August 2004. RESULTS AND DISCUSSION: Several models were achieved and only the best model of each methodology was analysed. In threshold models, the variables selected by GAs to define the O3 regimes were temperature, CO and NO2 concentrations, due to their importance in O3 chemistry in an urban atmosphere. CONCLUSION: In the prediction of O3 concentrations, the threshold model that considers two regimes was the one that fitted the data most efficiently.

BACKGROUND: In this study, manganese dioxide-coated multiwall carbon nanotube (MnO2/CNT) nanocomposite has been successfully synthesized. METHODS: The as-produced nanocomposite was characterized by different characteristic tools, such as X-ray diffraction, SEM, and FTIR. The MnO2/CNT nanocomposite was utilized as a fixed bed in a column system for removal of lead(II) from water. The experimental conditions were investigated and optimized. The pH range between 3 and 7 was studied; the optimum removal was found when the pH was equal to 6 and 7. The thickness of MnO2/CNT nanocomposite compact layer was also changed to find the optimum parameter for higher removal. RESULT: It was observed that the slower the flow rates of the feed solution the higher the removal because of larger contact time.

Binding of heavy metal ions by calcium alginate has been described in the literature with many different models. In the present study, two most basic models were used to systematically compare their simultaneous description of metal uptake dependence on pH and metal ion concentration in the bulk solution. The experimental datasets corresponding to the binary sorption systems containing protons and heavy metal ion (cadmium, lead, or copper) were taken from the literature. The applicability and limitations of both models are discussed. Neither of the models gave a completely satisfactory description of all data. The two-site occupancy model yielded better results compared to the one-site occupancy model when considering the coherence of the parameters (e.g., affinity constants) but the quality of the obtained fits is similar in both cases.