Temperature can play a significant role in the efficacy of solidifiers in removing oil slicks on water. We studied and quantified the effect of temperature on the performance of several solidifiers using 5 different types of oils under a newly developed testing protocol by conducting experiments in constant temperature rooms set at 22°C and 5°C. The results indicated that solidifier efficiency decreased substantially at the lower temperature, especially at lower application rates. The removal efficiency of the solidifier was in general directly proportional to temperature, except for the heavier oils, where removal by attachment was observed. Solidifier products with lower powder bulk density exhibited the best removal effectiveness. Analysis of experimental data yielded empirical correlations involving certain operational variables such as application rate, temperature, solidifier property (bulk density), and oil property (viscosity). Regression analysis was used to fit a mathematical model to the experimental solidifier effectiveness data.

This study defines and assesses a new operational concept to identify the origin of pollution at sea, based on Synthetic Aperture Radar, Automatic Identification System, and a forward drift model. As opposed to traditional methodologies where the SAR detected pollution is backtracked in the past, our approach assumes that all the vessels pollute all along their way. Based on all the AIS data flows, the forward-tracked simulated pollutions are then compared to the detected pollution, and the potential polluter can be finally identified. Case studies are presented to showcase its usefulness in a variety of maritime situations with a focus on orphan pollutions in a dense traffic area. Out of the identification of the suspected polluters, the age and eventually the type of the pollution can be retrieved.

In the era of plastic and global environmental issues, when large garbage patches have been observed in the main oceanic basins, this work is the first attempt to explore the possibility that similar permanent accumulation structures may exist in the Mediterranean Sea. The questions addressed in this work are: can the general circulation, with its sub-basins scale gyres and mesoscale instabilities, foster the concentration of floating items in some regions? Where are the more likely coastal zones impacted from open ocean sources?Multi-annual simulations of advected surface passive debris depict the Tyrrhenian Sea, the north-western Mediterranean sub-basin and the Gulf of Sirte as possible retention areas. The western Mediterranean coasts present very low coastal impact, while the coastal strip from Tunisia to Syria appears as the favourite destination. No permanent structure able to retain floating items in the long-term were found, as the basin circulation variability brings sufficient anomalies.

We summarize results of two independent studies on plastic pollution in the marine environment that overlap in time and space. One study evaluated the abundance of anthropogenic debris on 37 sandy beaches bordering the Salish Sea in Washington State while the other characterized plastic debris in surface waters of the Salish Sea and the Inside Passage to Skagway, Alaska. Both studies concluded that foam, primarily expanded polystyrene was the dominant pollutant. Plastic was found in surface waters the full length of the Inside Passage but was concentrated near harbors. At the wrack line, an average square meter of Washington’s 1180km of sandy beaches in the Salish Sea had 61 pieces of anthropogenic debris weighing approximately 5g. The total loading for the entire 1m wide band is estimated to be 72,000,000 pieces and 5.8metric tons. Most anthropogenic debris on beaches is generated within the region.

Spatial and temporal changes around an area of conventional coastal engineering can be easily observed from field surveys because of the clear cause-and-effect observable in the before and after stages of the project. However, it is more difficult to determine environmental changes in the vicinity of tidal flats and coastal areas that are a considerable distance from the project. To identify any unexpected environmental impacts of the construction of Saemangeum Dyke in the area, we examined morphological changes identified by satellite-based observations through a field survey on Gomso Bay tidal flats (15km from Saemangeum Dyke), and changes in the suspended sediment distribution identified by satellite-based observations through a hydrodynamic analysis in the Saemangeum and Gomso coastal area. We argue that hydrodynamic changes due to conventional coastal engineering can affect the sedimentation pattern in the vicinity of tidal flats. We suggest that the environmental impact assessment conducted before a conventional coastal engineering project should include a larger area than is currently considered.

The institutional frameworks addressing issues in connection with the marine commons agreed by States are set out in the 1982 UN Convention on the Law of the Sea, which is the basis of the European Union’s common fisheries policy. Despite a substantial body of environmental legislation, provisions concerning the protection of ecosystems and bioversity have not been incorporated into any international measure or EU to control fishing, leading to ecosystem degradation. Regulation should impose the responsibility for rectifying damage to fish stocks and ecosystems as a result of fishing activity on the fishing industry.

To date, little is known about existing relationships between mussels and bacteria in hydrocarbon-contaminated marine environments. The aim of this study is to find crude oil degrading bacteria in some mussels at the Persian Gulf. Twenty eight crude oil degrading bacteria were isolated from three mussels species collected from oil contaminated area at Persian Gulf. According to high growth and degradation of crude oil four strains were selected between 28 isolated strains for more study. Determination the nucleotide sequence of the gene encoding for 16S rRNA show that these isolated strains belong to: Shewanella algae isolate BHA1, Micrococcus luteus isolate BHA7, Pseudoalteromonas sp. isolate BHA8 and Shewanella haliotis isolate BHA35. The residual crude oil in culture medium was analysis by Gas Chromatography (GC). The results confirmed that these strains can degrade: 47.24%, 66.08%, 27.13% and 69.17% of crude oil respectively. These strains had high emulsification activity and biosurfactant production. Also, the effects of some factors on crude oil degradation by isolated strains were studied. The results show that the optimum concentration of crude oil was 2.5% and the best degradation take place at 12% of salinity. This research is the first reports on characterization of crude oil degrading bacteria from mussels at Persian Gulf and by using of these bacteria in the field the effect of oil pollution can be reduce on this marine environment.

The distribution of polychaetes associated with an offshore gas platform built on a muddy–sandy bottom in the northern Adriatic Sea was investigated with emphasis on their feeding structure. Polychaete species were collected at different distances from the rig using a Van Veen grab. Assessment of the polychaete community and trophic groups for impacts related to the presence of the platform demonstrated significantly different abundances at rising distances from the rig. The present findings highlight an effect of the rig on the spatial distribution of polychaete assemblages. Even though the effects of gas platforms on surrounding benthic communities have been investigated in the Adriatic Sea, no studies have addressed the distribution of polychaete trophic groups along a gradient based on distance from the rig.

Sediments in lakes and coasts can release metals into water via static diffusion and especially resuspension. The resuspension under sediment liquefaction may severely affect the concentrations of metals in water. In this study, flume experiments were carried out twice to study the release of two metal combinations (Zn and Pb; Zn and Cu), respectively. Each experiment included three phases: consolidation; non-liquefaction and liquefaction. Results showed that total Zn concentration at liquefaction phase increased by a maximum rate of 26 compared with the consolidation phase. The concentration of particulate Zn at liquefaction phase increased by a maximum rate of 8.30 compared with the non-liquefaction phase. The average concentration of dissolved Zn at the liquefaction phase increased up to 0.24 times from the consolidation phase. Total Zn concentration at the non-liquefaction phase increased by several times compared with the consolidation phase. Metals were homogeneously distributed in the liquefaction layer through wave actions.

The fallowing period is a management measure in aquaculture where the production is paused for a few months to reduce the impact on the benthic environment. We studied the effects of different fallowing periods on the recovery of macrofauna at two salmon farms in Norway. The macrofauna at the farm stations were characterised by high abundances of opportunistic taxa (e.g. Capitella spp.), low diversity and significantly different community structure compared to reference sites. The fallowing initiated macrofauna recovery at both farm stations, indicated by a decline of dominant opportunistic taxa after 2months. Significant changes in taxa composition occurred only after 6months, although indications of disturbance were still evident. Surprisingly, no corresponding spatial or temporal differences were found in the sediment parameters such as redox, TOC and pH. The results suggest that macrofauna is a more sensitive indicator and that the seasonal timing of fallowing may affect recovery dynamics.