Macrophytes play an important role in aquatic ecosystems, and thus are often used in ecological risk assessments of potentially deleterious anthropogenic substances. Risk assessments for macrophyte populations or communities are commonly based on inferences drawn from standardized toxicity tests conducted on floating non-rooted Lemna species, or submerged-rooted Myriophyllum species. These tests follow strict guidelines to produce reliable and robust results with legal credibility for environmental regulations. However, results and inferences from these tests may not be transferrable to emergent macrophytes due to their different morphology and physiology. Emergent macrophytes of the genus Typha L. are increasingly used for assessing phytotoxic effects of environmental stressors, although standardized testing protocols have not yet been developed for this genus. In this review we present a synthesis of previous toxicity studies with Typha, based on which we evaluate the potential to develop standard toxicity tests for Typha spp. with seven selection criteria: ecological relevance to the ecosystem; suitability for different exposure pathways; availability of plant material; ease of cultivation; uniform growth; appropriate and easily measurable toxicity endpoints; and sensitivity toward contaminants. Typha meets criteria 1–3 fully, criteria 4 and 5 partly based on current limited data, and we identify knowledge gaps that limit evaluation of the remaining two criteria. We provide suggestions for addressing these gaps, and we summarize the experimental design of ecotoxicology studies that have used Typha. We conclude that Typha spp. can serve as future standard test species for ecological risk assessments of contaminants to emergent macrophytes.

This is a research comment on the ochratoxin A (OTA) degradation mechanism by Lysobacter sp. CW239 regarding the previous publication in Environmental Pollution (Wei et al., 2020). Three possible degradation mechanisms were discussed in the referred publication, but without definite evidences, it was not clear which one worked actually. Here, the gene cp4 deficient mutant CW239Δᶜᵖ⁴ was successfully constructed, and the carboxypeptidase CP4 role on OTA degradation in strain CW239 was validated in vivo. As a result, the mutant CW239Δᶜᵖ⁴ without gene cp4 showed less than 10% reduction of 24 hrs degradation ratio compared to wide-type strain CW239. After the gene cp4 complemented to CW239Δᶜᵖ⁴, the complementary strain (+)cp4 recovered the degradation ability to wide-type. The validation result indicated that the third degradation mechanism (i.e., OTA is degraded by joint action of multiple enzymes in CW239) proposed previous (Wei et al., 2020) was correct route for the degradation strain. This commentary was significant to the following studies on the pollutant detoxify strains with similar degradation characters between identified enzyme and the host strain.

With the exploitation of lead-zinc deposits, lead content around mining areas has seriously exceeded the recommended level. The most challenging problem is how to reduce lead contamination in soil efficiently. In this study, we developed a method to remediate lead-contaminated soil by adding Morchella mycelium. First, we compared the repair effects of mycelium and hyperaccumulator by conducting pot experiments. Then, we investigated the mechanism through which mycelium repairs lead-contaminated soil by conducting simulation experiments. Results showed that using mycelium was a more efficient way to repair soil than using hyperaccumulator. Compared with the untreated group, mycelium reduced the lead content of crops by 34.83 % and raised dry biomass by 134.05 % when lead addition was 800 mg/kg. After mycelium fixation, soil catalase, urease, cellulase, and sucrase activities were significantly enhanced, and the bioavailability of lead decreased significantly. The lead solution exposure simulation test showed that Morchella mycelium immobilized lead due to its extracellular secretions. That is, mycelium secreted metabolites and lead to form salt crystals, reducing bioavailable lead content. In addition, Morchella mycelium restoration may effectively improve soil fertility and increase crop yields. Thus, mycelium may be used successfully in alternative green repair methods for environmental heavy metal remediation.

House dust is an important medium for exposure to persistent pollutants, such as metals. Detailed characterization of metal composition is needed to identify sources and potential health impacts of exposure. In this study we show that specific metals in dust dominate in different locations within residential homes in a mid-size Canadian city (Fort McMurray, Alberta), up to two years after a major wildfire event in 2016. Dust samples were collected in high-traffic (e.g. bedroom, N = 186), low-traffic (e.g. basement, N = 158), and entranceway areas (N = 171) of residential homes (N = 125), and analyzed for 25 trace metal elements using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The profile of metal concentrations in the entranceway resembled that of outdoor soils, especially for crustal elements. On the other hand, Cu, Zn, and Pb concentrations in dust sampled in indoor living areas were on average three to six times higher than in other indoor locations indicating indoor sources for these elements. In general, Pb concentrations were similar or lower than in an average Canadian residence, but a substantial fraction showed anomalously high concentrations in the low-traffic areas, particularly on concrete surfaces in basements. Notably, the 2016 wildfires showed limited influence on metal concentrations in indoor dust, despite the widespread concerns in the community about long term exposure. Enrichment factor ratio calculations and principal component analysis showed two classes of sources of metals in dust that represent geogenic-outdoor sources and anthropogenic-indoor sources. Overall, we demonstrate that outdoor and indoor sources of dust impact its composition, and these influences are reflected in the different areas of a home.

Allergic diseases have been one of the leading causes of chronic disorders in the United States. Animal studies have suggested that exposures to perchlorate, nitrate, and thiocyanate could induce allergic inflammation. However, the associations have not been examined among general populations. Here, we investigated data of 7030 participants aged ≥6 years from the National Health and Nutritional Examination Survey (NHANES) 2005–2006. Urinary levels of perchlorate, nitrate, and thiocyanate were measured by ion chromatography combined with electrospray tandem mass spectrometry. Information on allergic symptoms (hay fever, allergy, rash, sneeze, wheeze, eczema, and current asthma) was collected by questionnaire. Allergic sensitization was defined by a concentration ≥150 kU/L for total immunoglobulin E (IgE) levels. The associations were estimated using multivariate-adjusted logistic regression models. A positive association was observed for urinary nitrate and eczema (p < 0.001 for the trend). Compared with quartile 1 (lowest quartile), the odds ratios of eczema with 95% confidence intervals [ORs (95% CIs)] from quartiles 2 to 4 were 1.72 (95% CI, 1.41, 2.09), 1.94 (1.53, 2.47) and 2.10 (1.49, 2.97) for urinary nitrate. In addition, urinary thiocyanate was positively related to sneeze (ORQ₄ ᵥₛ. Q₁: 1.25, 95% CI: 1.01, 1.55; p = 0.015 for the trend). However, urinary perchlorate was not correlated with any allergic-related outcome. Additionally, the associations were different among subgroups in a four-level polytomous model. Thus, our results suggested that exposures to nitrate and thiocyanate may be associated with allergic symptoms. Further investigations are warranted to concentrate on the practical strategies to monitor exposure levels and the latent mechanisms of the relationship between exposure and allergy.

Industrial metalworking facilities emit a variety of air toxics including volatile organic compounds, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. In order to investigate these emissions, a 1-month multi-instrument field campaign was undertaken at an industrial site in Grande-Synthe, Dunkirk (France), in May and June 2012. One of the main objectives of the study was to provide new information on the chemical composition of particulate matter with aerodynamic diameters smaller than 2.5 μm (PM₂.₅) in the vicinity of metalworking facilities. An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed to provide size-resolved chemical mixing state measurements of ambient single particles at high temporal resolution. This mixing state information was then used to apportion PM₂.₅ to local metalworking facilities influencing the receptor site. Periods when the site was influenced by metalworking sources were characterised by a pronounced increase in particles containing toxic metals (manganese, iron, lead) and polycyclic aromatic hydrocarbons (PAHs) with a variety of chemical mixing states. The association of specific particle classes with a nearby ferromanganese alloy manufacturing plant was confirmed through comparison with previous analysis of raw materials (ores) and chimney filter particle samples collected at the facility. Particles associated with emissions from a nearby steelworks were also identified. The contribution of local metalworking activities to PM₂.₅ at the receptor site for the period when the ATOFMS was deployed ranged from 1 to 65% with an average contribution of 17%, while the remaining mass was attributed to other local and regional sources. These findings demonstrate the impact of metalworking facilities on air quality downwind and provide useful single particle signatures for future source apportionment studies in communities impacted by metalworking emissions.

Pfaffia glomerata is a candidate for the remediation of heavy metal-contaminated soil, but phytoremediation efficiency requires enhancement. In this study, we evaluated how application of DA-6, EDTA, or CA affected the growth and heavy metal accumulation of P. glomerata and soil microorganisms. We found that P. glomerata removed more Cd and Zn than Pb or Cu from contaminated soil. When compared to the control, application of DA-6, CA, or CA + DA-6 increased plant biomass and increased stem Cd concentration by 1.28-, 1.20-, and 1.31-fold respectively; increased leaf Cd concentration by 1.25-, 1.28-, and 1.20-fold, respectively; and increased the total quantity of Cd extracted by 1.37-, 1.37-, and 1.38-fold, respectively. When compared to the control, application EDTA or EDTA + DA-6 significantly increased the soil available metal and Na concentrations, which harmed plant growth. Application of EDTA or EDTA + DA-6 also significantly decreased the Cd concentration in roots and stems. 16S rRNA high-throughput sequencing analysis revealed that application of EDTA or CA alone to soil significantly reduced the richness and diversity of soil bacteria, while foliar spraying of DA-6 combined with EDTA or CA slightly alleviated this reduction. EDTA or CA addition significantly changed the proportion of Actinobacteria and Proteobacteria. In addition, EDTA or CA addition caused changes in soil properties (e.g. heavy metal availability, K concentration, Na concentration, soil pH, soil CEC, and soil DOC concentration) that were associated with changes in the bacterial community. EDTA addition mainly affected the soil bacterial community by changing soil DOC concentration, the soil available Pb and Na concentration, and CA addition mainly affected the soil bacterial community by changing the soil available Ca concentration.

Soil-borne diseases have become increasingly problematic for farmers producing crops intensively under protected agriculture. Although soil fumigants are convenient and effective for minimizing the impact of soil-borne disease, they are most often detrimental to beneficial soil microorganisms. Previous research showed that bio-activation of soil using biological control agents present in biofertilizers or organic fertilizers offered promise as a strategy for controlling soil-borne pathogens when the soil was bio-activated after fumigation. Our research sought to determine how bio-activation can selectively inhibit pathogens while promoting the recovery of beneficial microbes. We monitored changes in the soil’s physicochemical properties, its microbial community and reductions in soil-borne pathogens. We found that the population density of Fusarium and Phytophthora were significantly reduced and tomato yield was significantly increased when the soil was bio-activated. Soil pH and soil catalase activity were significantly increased, and the soil’s microbial community structure was changed, which may have enhanced the soil’s ability to reduce Fusarium and Phytophthora. Our results showed that soil microbial diversity and relative abundance of beneficial microorganisms (such as Sphingomonas, Bacillus, Mortierella and Trichoderma) increased shortly after bio-activation of the soil, and were significantly and positively correlated with pathogen suppression. The reduction in pathogens may have been due to a combination of fumigation-fertilizer that reduced pathogens directly, or the indirect effect of an optimized soil microbiome that improved the soil’s non-biological factors (such as soil pH, fertility structure), enhanced the soil’s functional properties and increased tomato yield.

Air pollution is well recognized as a central player in cardiovascular disease. Exhaust particulate from diesel engines (DEP) is rich in nanoparticles and may contribute to the health effects of particulate matter in the environment. Moreover, diesel soot emitted by modern engines denotes defective surfaces alongside chemically-reactive sites increasing soot cytotoxicity. We recently demonstrated that engineered nanoparticles can cross the air/blood barrier and are capable to reach the heart. We hypothesize that DEP nanoparticles are pro-arrhythmogenic by direct interaction with cardiac cells. We evaluated the internalization kinetics and the effects of DEP, collected from Euro III (DEPe3, in the absence of Diesel Particulate Filter, DPF) and Euro IV (DEPe4, in the presence of DPF) engines, on alveolar and cardiac cell lines and on in situ rat hearts following DEP tracheal instillation. We observed significant differences in DEP size, metal and organic compositions derived from both engines. DEPe4 comprised ultrafine particles (<100 nm) and denoted a more pronounced toxicological outcome compared to DEPe3. In cardiomyocytes, particle internalization is fastened for DEPe4 compared to DEPe3. The in-vivo epicardial recording shows significant alteration of EGs parameters in both groups. However, the DEPe4-instilled group showed, compared to DEPe3, a significant increment of the effective refractory period, cardiac conduction velocity, and likelihood of arrhythmic events, with a significant increment of membrane lipid peroxidation but no increment in inflammation biomarkers. Our data suggest that DEPe4, possibly due to ultrafine nanoparticles, is rapidly internalized by cardiomyocytes resulting in an acute susceptibility to cardiac electrical disorder and arrhythmias that could accrue from cellular toxicity. Since the postulated transfer of nanoparticles from the lung to myocardial cells has not been investigated it remains open whether the effects on the cardiovascular function are the result of lung inflammatory reactions or due to particles that have reached the heart.

Organic-matter decomposition has long been proposed as a tool to assess stream functional integrity, but this indicator largely depends on organic-matter selection. We assessed eight decomposition-based indicators along two well-known environmental gradients, a nutrient-enrichment gradient (0.2–1.4 mg DIN/L) in central Portugal and an acidification gradient (pH: 4.69–7.33) in north-eastern France to identify the most effective organic-matter indicator for assessing stream functional integrity. Functional indicators included natural leaf litter (alder and oak) in 10-mm and 0.5-mm mesh bags, commercial tea (Lipton green and rooibos teas in 0.25-mm mesh bags), wood sticks (wood tongue depressors) and cotton strips. Biotic indices based on benthic macroinvertebrates (IPtIN for Portugal and IBGN for France) were calculated to compare the effectiveness of structural and functional indicators in detecting stream impairment and to assess the relationship between both types of indicators. The effectiveness of organic-matter decomposition rates as a functional indicator depended on the stressor considered and the substrate used. Decomposition rates generally identified nutrient enrichment and acidification in the most acidic streams. Decomposition rates of alder and oak leaves in coarse-mesh bags, green and rooibos teas and wood sticks were positively related with pH. Only decomposition rates of rooibos tea and wood sticks were related with DIN concentration; decomposition rates along the nutrient-enrichment gradient were confounded by differences in shredder abundance and temperature among streams. Stream structural integrity was good to excellent across streams; the IPtIN index was unrelated to DIN concentration, while the IBGN index was positively related with pH. The relationships between decomposition rates and biotic indices were loose in most cases, and only decomposition rates of alder leaves in coarse-mesh bags and green tea were positively related with the IBGN. Commercial substrates may be a good alternative to leaf litter to assess stream functional integrity, especially in the case of nutrient enrichment.