Oxygen vacancy-enriched N/P co-doped cobalt ferrite (NPCFO) was synthesized using ionic liquid as N and P sources, and then the catalytic performance and mechanism of NPCFO upon peroxymonosulfate (PMS) activation for the degradation of organic pollutants were investigated. The as-synthesized NPCFO-700 exhibited excellent catalytic performance in activating PMS, and the degradation rate constant of 4-chlorophenol (4-CP) increased with the increase of OV concentration in NPCFO-x. EPR analysis confirmed the existence of ·OH, SO₄·⁻, and ¹O₂ in the NPCFO-700/PMS system, in which OV could induce the generation of ¹O₂ by PMS adsorption and successive capture, and also served as electronic transfer medium to accelerate the redox cycle of M²⁺/M³⁺ (M denotes Co or Fe) for the generation of radical to synergistically degrade organic pollutants. In addition, the contribution of free radical and nonradical to 4-CP degradation was observed to be strongly dependent on solution pH, and SO₄·⁻ was the major ROS in 4-CP degradation under acid and alkaline condition, while ¹O₂ was involved in the degradation of 4-CP under neutral condition due its selective oxidation capacity, as evidenced by the fact that such organic pollutants with ionization potential (IP) below 9.0 eV were more easily attacked by ¹O₂. The present study provided a novel insight into the development of transition metal-based heterogeneous catalyst containing massive OV for high-efficient PMS activation and degradation of organic pollutants.

Industrial metalworking facilities emit a variety of air toxics including volatile organic compounds, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. In order to investigate these emissions, a 1-month multi-instrument field campaign was undertaken at an industrial site in Grande-Synthe, Dunkirk (France), in May and June 2012. One of the main objectives of the study was to provide new information on the chemical composition of particulate matter with aerodynamic diameters smaller than 2.5 μm (PM₂.₅) in the vicinity of metalworking facilities. An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed to provide size-resolved chemical mixing state measurements of ambient single particles at high temporal resolution. This mixing state information was then used to apportion PM₂.₅ to local metalworking facilities influencing the receptor site. Periods when the site was influenced by metalworking sources were characterised by a pronounced increase in particles containing toxic metals (manganese, iron, lead) and polycyclic aromatic hydrocarbons (PAHs) with a variety of chemical mixing states. The association of specific particle classes with a nearby ferromanganese alloy manufacturing plant was confirmed through comparison with previous analysis of raw materials (ores) and chimney filter particle samples collected at the facility. Particles associated with emissions from a nearby steelworks were also identified. The contribution of local metalworking activities to PM₂.₅ at the receptor site for the period when the ATOFMS was deployed ranged from 1 to 65% with an average contribution of 17%, while the remaining mass was attributed to other local and regional sources. These findings demonstrate the impact of metalworking facilities on air quality downwind and provide useful single particle signatures for future source apportionment studies in communities impacted by metalworking emissions.

Pfaffia glomerata is a candidate for the remediation of heavy metal-contaminated soil, but phytoremediation efficiency requires enhancement. In this study, we evaluated how application of DA-6, EDTA, or CA affected the growth and heavy metal accumulation of P. glomerata and soil microorganisms. We found that P. glomerata removed more Cd and Zn than Pb or Cu from contaminated soil. When compared to the control, application of DA-6, CA, or CA + DA-6 increased plant biomass and increased stem Cd concentration by 1.28-, 1.20-, and 1.31-fold respectively; increased leaf Cd concentration by 1.25-, 1.28-, and 1.20-fold, respectively; and increased the total quantity of Cd extracted by 1.37-, 1.37-, and 1.38-fold, respectively. When compared to the control, application EDTA or EDTA + DA-6 significantly increased the soil available metal and Na concentrations, which harmed plant growth. Application of EDTA or EDTA + DA-6 also significantly decreased the Cd concentration in roots and stems. 16S rRNA high-throughput sequencing analysis revealed that application of EDTA or CA alone to soil significantly reduced the richness and diversity of soil bacteria, while foliar spraying of DA-6 combined with EDTA or CA slightly alleviated this reduction. EDTA or CA addition significantly changed the proportion of Actinobacteria and Proteobacteria. In addition, EDTA or CA addition caused changes in soil properties (e.g. heavy metal availability, K concentration, Na concentration, soil pH, soil CEC, and soil DOC concentration) that were associated with changes in the bacterial community. EDTA addition mainly affected the soil bacterial community by changing soil DOC concentration, the soil available Pb and Na concentration, and CA addition mainly affected the soil bacterial community by changing the soil available Ca concentration.

Investigating the long-term trends of alkyl nitrates (RONO₂) is of great importance for evaluating the variations of photochemical pollution. Mixing ratios of C₁–C₅ RONO₂ were measured in autumn Hong Kong from 2002 to 2016, and the average level of 2-butyl nitrate (2-BuONO₂) always ranked first. The C₁–C₄ RONO₂ all showed increasing trends (p < 0.05), and 2-BuONO₂ had the largest increase rate. The enhancement in C₃ RONO₂ was partially related to elevated propane, and dramatic decreases (p < 0.05) in both nitrogen monoxide (NO) and nitrogen dioxide (NO₂) also led to the increased RONO₂ formation. In addition, an increase of hydroxyl (OH) and hydroperoxyl (HO₂) radicals (p < 0.05) suggested enhanced atmospheric oxidative capacity, further resulting in the increases of RONO₂. Source apportionment of C₁–C₄ RONO₂ specified three typical sources of RONO₂, including biomass burning emission, oceanic emission, and secondary formation, of which secondary formation was the largest contributor to ambient RONO₂ levels. Mixing ratios of total RONO₂ from each source were quantified and their temporal variations were investigated. Elevated RONO₂ from secondary formation and biomass burning emission were two likely causes of increased ambient RONO₂. By looking into the spatial distributions of C₁–C₅ RONO₂, regional transport from the Pearl River Delta (PRD) was inferred to build up RONO₂ levels in Hong Kong, especially in the northwestern part. In addition, more serious RONO₂ pollution was found in western PRD region. This study helps build a comprehensive understanding of RONO₂ pollution in Hong Kong and even the entire PRD.

Root-triggered microscale variations in O₂ distribution in the rhizosphere of young Phragmites australis are important for nutrient removal in sediments. In this study, the micro-scale O₂ dynamics and the small-scale changes of soluble reactive phosphorus (SRP) and ammonium (NH₄⁺) in the rhizosphere of P. australis were investigated using planar optodes and high-resolution dialysis (HR-Peeper), respectively. Results suggested that root O₂ leakage has a highly variable distribution depending on the stage of root growth, the site of O₂ leakage gradually shift from the entire emerging main roots to the main root tip and subsequently shifted the emerging lateral roots. The O₂ concentration increased in the rhizosphere with increasing light intensity and O₂ levels in the overlying water. Continuous O₂ release from the lateral roots causes the formation of iron plaque on the surface of lateral roots, which reduce the mobility of P by adsorption of iron plaque in the rhizosphere. The oscillation of oxic-anoxic root zones improves nitrogen removal through the processes of anammox, heterotrophic denitrification and nitrification. This work from the micro-scale demonstrates that the O₂ concentration is the spatio-temporal variations in the rhizosphere, and it presents an important role for nutrient removal in sediments.

Ambient ozone (O₃) concentrations have shown an upward trend in China and its health hazards have also been recognized in recent years. High-resolution exposure data based on statistical models are needed. Our study aimed to build high-performance random forest (RF) models based on training data from 2013 to 2017 in the Beijing-Tianjin-Hebei (BTH) region in China at a 0.01 ° × 0.01 ° resolution, and estimated daily maximum 8h average O₃ (O₃-8hmax) concentration, daily average O₃ (O₃-mean) concentration, and daily maximum 1h O₃ (O₃-1hmax) concentration from 2010 to 2017. Model features included meteorological variables, chemical transport model output variables, geographic variables, and population data. The test-R² of sample-based O₃-8hmax, O₃-mean and O₃-1hmax models were all greater than 0.80, while the R² of site-based and date-based model were 0.68–0.87. From 2010 to 2017, O₃-8hmax, O₃-mean, and O₃-1hmax concentrations in the BTH region increased by 4.18 μg/m³, 0.11 μg/m³, and 4.71 μg/m³, especially in more developed regions. Due to the influence of weather conditions, which showed high contribution to the model, the long-term spatial distribution of O₃ concentrations indicated a similar pattern as altitude, where high concentration levels were distributed in regions with higher altitude.

Red mud and phosphogypsum are voluminous industrial by-products worldwide. They have long been disposed of in landfills or open storage, leading to a waste of resource and environmental pollution. This study provides a novel approach to recycle these industrial by-products as sustainable red mud-phosphogypsum-Portland cement (RPPC) binders for stabilization/solidification (S/S) of multimetal-contaminated soil. The physical strength, metal leachability and microstructure of S/S soil were investigated after 7-day and 28-day curing, as well as freezing-thawing (F-T) cycle and wetting-drying (W-D) cycle. The results show that the strength of soil treated by all binders fulfilled the uniaxial compressive strength requirement (350 kPa) of S/S waste in landfills. Microstructural analyses show that the main hydration products of the RPPC S/S soil are ilmenite, ettringite, anhydrite and hydrated calcium silicate. The 10% and 15% RPPC binders have a competitive metal immobilization ability compared with 10% PC, but the immobilization priority is different: Pb > Zn > Cd in RPPC system and Zn > Cd > Pb in PC system, respectively, probably due to the precipiataion of Pb²⁺ with the abundant SO₄²⁻ in phosphogypsum in RPPC system. The strength of RPPC and PC treated soil was still higher than 350 kPa except for RPPC7.5 after 10 freeze-thaw or 10 wetting-drying cycles. The RPPC binder performed worse than PC binder after both freeze-thaw and wetting-drying cycles, especially at a lower dosage. Only the metal leaching concentrations of samples treated by RPPC15 and PC10 could fulfil the Chinese standards for hazardous wastes.

To help understand the pathophysiologic mechanisms linking air pollutants and cardiovascular disease (CVD), we employed a repeated measures design to investigate the associations of four short-term air pollution exposures – particulate matter less than 2.5 μm in diameter (PM₂.₅), nitrogen dioxide (NO₂), ozone (O₃) and sulfur dioxide (SO₂), with two blood markers involved in vascular effects of oxidative stress, soluble lectin-like oxidized LDL receptor-1 (sLOX-1) and nitrite, using data from the Multi-Ethnic Study of Atherosclerosis (MESA). Seven hundred and forty participants with plasma sLOX-1 and nitrite measurements at three exams between 2002 and 2007 were included. Daily PM₂.₅, NO₂, O₃ and SO₂ zero to seven days prior to blood draw were estimated from central monitors in six MESA regions, pre-adjusted using site-specific splines of meteorology and temporal trends, and an indicator for day of the week. Unconstrained distributed lag generalized estimating equations were used to estimate net effects over eight days with adjustment for sociodemographic and behavioral factors. The results showed that higher short-term concentrations of PM₂.₅, but not other pollutants, were associated with increased sLOX-1 analyzed both as a continuous outcome (percent change per interquartile increase: 16.36%, 95%CI: 0.1–35.26%) and dichotomized at the median (odds ratio per interquartile increase: 1.21, 95%CI: 1.01–1.44). The findings were not meaningfully changed after adjustment for additional covariates or in several sensitivity analyses. Pollutant concentrations were not associated with nitrite levels. This study extends earlier experimental findings of increased sLOX-1 levels following PM inhalation to a much larger population and at ambient concentrations. In light of its known mechanistic role in promoting vascular disease, sLOX-1 may be a suitable translational biomarker linking air pollutant exposures and cardiovascular outcomes.

Bisphenol A (BPA), an endocrine-disrupting chemical that is largely produced and used in the plastics industry, causes environmental pollution and is absorbed by humans through consumption of food and liquids in polycarbonate containers. BPA exerts developmental and genetic toxicities to embryos and offsprings, but the embryotoxicity mechanism of this chemical is unclear. This study aimed to explore the toxic effect of BPA on embryonic development and elucidate its toxicity mechanism. Embryos of Xenopus laevis as a model were treated with different concentrations (0.1, 1, 10, and 20 μM) of BPA at the two-cell stage to investigate the developmental toxicity of BPA. Embryonic development and behaviors were monitored 24 h–96 h of BPA exposure. BPA concentrations greater than 1 μM exerted significant teratogenic effects on the Xenopus embryos, which showed short tail axis, miscoiled guts, and bent notochord as the main malformations. The 20 μM BPA-treated embryos were seriously damaged in all aspects and exhibited deformity, impaired behavioral ability, and tissue damage. The DNA integrity and apoptosis of the Xenopus embryos were also investigated. Exposure to BPA concentrations higher than 0.1 μM significantly induced DNA damage (p < 0.05). The 10 and 20 μM BPA-treated embryos exhibited higher levels of cleaved caspase-3 protein than the control. The ratios of bax/bcl-2 mRNA were significantly higher in the 10 μM and 20 μM-treated embryos than the ratio in the control group. Overall, data indicated that BPA can delay the early development, induce DNA damage and apoptosis, and eventually cause multiple malformations in Xenopus embryos.

As an important form of urban water resource, urban artificial lakes are severely affected by rapid urbanization and interference from human activities. These small lakes are characterized by their unique irregular shape, fragile ecosystem, and relatively closed, stagnant waterbodies. However, few studies have focused on their hydrodynamics and water quality, in particular the restoration methods and mechanisms remaining unclear. The present study applied the MIKE 21 FM model to investigate the effects of water diversion on water quality in a typical urban artificial lake. By considering different flow arrangements, several model scenarios were set up to predict the impacts of water diversion on selected water quality parameter. The results showed that the effectiveness of water diversion was directly related to flow velocity, the relative position to the fresh water inlet, the amount and quality of fresh water and water remaining to be diluted, and the circulation direction of flow field. The inflow–outflow arrangement was the primary factor determining the flow field and NH₃–N variation trends across the lake, and an increased discharge exhibited unequal effects in individual zones. Wind was also important for the formation of flow circulation and pollutant variation. Methods were proposed for enhancing water quality in urban small-scale lakes, including changing the way diversion projects are managed, improving the quality of diverted flow, enhancing flow fluidity, or utilizing wind effects and local topography.