An event-driven, urban, drinking water quality early warning and control system (DEWS) is proposed to cope with China’s urgent need for protecting its urban drinking water. The DEWS has a web service structure and provides users with water quality monitoring functions, water quality early warning functions, and water quality accident decision-making functions. The DEWS functionality is guided by the principles of control theory and risk assessment as applied to the feedback control of urban water supply systems. The DEWS has been deployed in several large Chinese cities and found to perform well insofar as water quality early warning and emergency decision-making is concerned. This paper describes a DEWS for urban water quality protection that has been developed in China.

This research investigated whether environmental conditions, biological fish characteristics and anthropogenic impacts influenced mercury (Hg) assimilation into the muscle tissue of two fish species from two Brazilian bays, Ilha Grande Bay and Guanabara Bay. Fish and superficial water were collected in different periods. Hg was determined by CV-AAS. Methylmercury (MeHg) was identified and quantified by ECD-GC. Chlorophyll a concentrations in the water column indicated that Ilha Grande Bay and Guanabara Bay were oligotrophic and eutrophic, respectively. Hg in fish ranged from 2.10 to 870.17 μg kg⁻¹ dry wt. in Ilha Grande Bay and 40.90 to 809.24 μg kg⁻¹ dry wt. in Guanabara Bay. Slight differences were found between the length-normalized Hg concentrations and its percent of Hg in a voracious predator from the bays. In Guanabara Bay, where the presence of a chlor-alkali plant causes Hg input, the iliophagous fish species showed the highest length-normalized Hg concentrations and the voracious predator the lowest. Iliophagous fish is consumed by voracious predator and, consequently, acts as their MeHg food supply. Iliophagous fish from Ilha Grande Bay presented a higher percent of MeHg (80.0 %) than specimens from Guanabara Bay (54.5 %). This fact suggests that more MeHg was transferred from iliophagous fish to voracious predator in Ilha Grande Bay. At Guanabara Bay, the bioproduction is greater than that at Ilha Grande Bay, presenting the highest biomass in it ecosystem, which may subsequently dilute Hg and reduce its availability to the biota; i.e., influencing in Hg and MeHg availability throughout the food chain. Consequently, more MeHg is available in the aquatic environment of Ilha Grande Bay.

The performance of two bacteria, Arthrobacter viscosus and Streptococcus equisimilis, and the effect of the interaction of these bacteria with four different clays on the retention of diethylketone were investigated in batch experiments. The uptake, the removal percentages and the kinetics of the processes were determined. S. equisimilis, by itself, had the best performance in terms of removal percentage, for all the initial diethylketone concentrations tested: 200, 350 and 700 mg/L. The uptake values are similar for both bacteria. A possible mechanism to explain the removal of diethylketone includes its degradation by bacteria, followed by the adsorption of the intermediates/sub-products by the functional groups present on the cells' surfaces. The assays performed with bacteria and clays indicated that the uptake values are similar despite of the clay used, for the same microorganism and mass of clay, but in general, higher values are reached when S. equisimilis is used, compared to A. viscosus. Kinetic data were described by pseudo-first- and pseudo-second-order models.

Activated carbons (ACs) were developed from bio-waste materials like rice husk and peanut shell (PS) by various physicochemical activation methods. PS char digested in nitric acid followed by treatment at 673 K resulted in high surface area up to ∼585 m²/g. The novelty of the present study is the identification of oxygen functional groups formed on the surface of activated carbons by infrared and X-ray photoelectron spectroscopy and quantification by using temperature programmed decomposition (TPD). Typical TPD data indicated that each activation method may lead to varying amounts of acidic and basic functional groups on the surface of the adsorbent, which may be a crucial factor in determining the adsorption capacity. It was shown that ACs developed during the present study are good adsorbents, especially for the removal of a model textile dye methylene blue (MB) from aqueous solution. As MB is a basic dye, H₂O₂-treated rice husk showed the best adsorption capacity, which is in agreement with the acidic groups present on the surface. Removal of the dye followed Langmuir isotherm model, whereas MB adsorption on ACs followed pseudo-second-order kinetics.

Cryogenic time-resolved laser-induced fluorescence spectroscopy was successfully used to identify uranium binding forms in selected German mineral waters of extremely low uranium concentrations (<2.0 μg/L). The measurements were performed at a low temperature of 153 K. The spectroscopic data showed a prevalence of aquatic species Ca2UO2(CO3)3 in all investigated waters, while other uranyl-carbonate complexes, viz, UO2CO3(aq) and UO2(CO3)2 (2-), only existed as minor species. The pH value, alkalinity (CO3 (2-)), and the main water inorganic constituents, specifically the Ca(2+) concentration, showed a clear influence on uranium speciation. Speciation modeling was performed using the most recent thermodynamic data for aqueous complexes of uranium. The modeling results for the main uranium binding form in the investigated waters indicated a good agreement with the spectroscopy measurements.

Bulk atmospheric deposition measurements for selected persistent toxic substances (PTS) were performed along environment gradients (urban–suburban–rural–background sites) in Brazil. The aim with this work is to investigate the fate of PTS and their emissions in South America, particularly along environment transects. Bulk sampler systems (polyurethane foams, 1 × 1 m²) were fixed along environment gradients (urban–suburban–rural–background) over summer and winter periods (2005–2007) at sites of different climate zones of Brazil. Organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) were analyzed by gas chromatography coupled to electron capture detector (Shimadzu 2010, 20i GC-ECD). Urban sites reported the highest deposition rates for all PTS, ranging from tens to thousands of pictograms per square meter per day. Basically, there were no obvious seasonal differences in deposition rate concentrations for PTS along the urban–suburban–rural–background gradient. Dichlorodiphenyltrichloroethane (DDT) and its metabolites were the OCs most frequently detected at relatively high deposition rate levels (>1,000 pg m⁻² day⁻¹). Other legacy and current-use pesticides such as hexachlorocyclohexanes, endosulfans, hexachlorcyclobenzine, dieldrin, aldrin, metoxichlor, and chlodanes were also detected at lower deposition rate levels (10–100 pg m⁻² day⁻¹). PCBs were detected at extremely high deposition rate levels (1,000–10,000 pg m⁻² day⁻¹) with highest contributions from the tetra-PCBs (PCB-52, PCB-44, PCB-66, PCB-81, and PCB-77) and penta-PCB congeners (PCB-101, PCB-105, PCB-114, PCB-118, and PCB-126). The greatest deposition rate concentrations for total PCBs were mainly detected at urban sites in connection with high population densities. The observed high deposition rate concentrations for PCBs and DDTs at urban sites are probably associated with old PTS stocks emissions. For PCBs in particular, the high levels are strongly associated with local population densities, highlighting the effect of local/regional urban sources on these target PTS. These results are important to show that even though the use of PTS is regulated, the deposition of selected PTS is still impacted by local and regional emissions in Brazil and may be related to the historical and continued emissions from old PTS stocks.

Perfluorinated chemicals (PFCs) have been used for many years in numerous industrial products and are known to accumulate in organisms. A recent survey showed that tissue levels of PFCs in aquatic organisms varied among compounds and species being undetected in freshwater zebra mussels Dreissena polymorpha. Here we studied the bioaccumulation kinetics and effects of two major PFCs, perfluorooctane sulfonic acid compound (PFOS) and perfluorooctanoic acid (PFOA), in multixenobiotic transporter activity (MXR) and filtration and oxygen consumption rates in zebra mussel exposed to a range of concentrations of a PCF mixture (1–1,000 μg/L) during 10 days. Results indicate a low potential of the studied PFCs to bioaccumulate in zebra mussel tissues. PFCs altered mussel MXR transporter activity being inhibited at day 1 but not at day 10. Bioaccumulation kinetics of PFCs were inversely related with MXR transporter activity above 9 ng/g wet weight and unrelated at tissue concentration lower than 2 ng/g wet weight suggesting that at high tissue concentrations, these type of compounds may be effluxed out by MXR transporters and as a result have a low potential to be bioaccumulated in zebra mussels. Oxygen consumption rates but not filtering rates were increased in all exposure levels and periods indicating that at environmental relevant concentrations of 1 μg/L, the studied PFCs enhanced oxidative metabolism of mussels. Overall, the results obtained in this study confirm previous findings in the field indicating that an important fraction of PFC accumulated in mussel tissues is eliminated actively by MXR transporters or other processes that are metabolically costly.

The removal of steroid and phenolic endocrine-disrupting compounds (EDCs) from an aqueous environment was investigated using magnetic particles encapsulated by a duo-molecularly imprinted polymer (duo-MIP). The effect of environmental variables on the binding efficiency was studied. Experimental results showed that the amount of EDCs adsorbed was neither affected by up to 10.0 mM NaCl nor significantly interfered by up to 10.0 mg/L humic acid. Negligible influence was observed from pH 3.3 to pH 6.8, but a decrease started at pH 9. Freundlich isotherm parameters indicated binding capacities in the order of DES > E2 ∼ E1 > BPA. The applicability of class-selective removal was verified using river water samples spiked with these EDCs at 10 μg/L; the binding efficiencies were 90, 90, 88, and 98 % for estrone (E1), 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES), respectively. A reuse investigation verified constant binding capacities exhibiting <2 % reduction after seven cycles of regeneration.

A microarray for the detection of toxic algal species was developed in the European Union 7th Framework project MIDTAL. We initially tested all available fluorescence in situ hybridisation probes for toxic algae, which are normally designed to a length of 18 nt, and found that in most cases the signal was rather weak or all probes designed from the second half of the molecule were inaccessible in a microarray format because of secondary structure of the ribosomal RNA molecule We modified the length of the probes, the fragmentation of the rRNA, the stringency of the washing buffers and the length of the spacer molecules linking the probes to the glass surface of the microarray. Because of the secondary structure of the rRNA molecule, regions of the molecule can be difficult to access by the probes. Each of these modifications has improved probe accessibility and probe specificity to reduce false positives.

PURPOSE: Heavy metals are toxic pollutants released into the environment as a result of different industrial activities. Biosorption of heavy metals from aqueous solutions is a new technology for the treatment of industrial wastewater. The aim of the present research is to highlight the basic biosorption theory to heavy metal removal. MATERIALS AND METHODS: Heterogeneous cultures mostly dried anaerobic bacteria, yeast (fungi), and protozoa were used as low-cost material to remove metallic cations Pb(II), Cr(III), and Cd(II) from synthetic wastewater. Competitive biosorption of these metals was studied. RESULTS: The main biosorption mechanisms were complexation and physical adsorption onto natural active functional groups. It is observed that biosorption of these metals was a surface process. The main functional groups involved in these processes were hydroxyl (–OH) and carboxylic groups (C=O) with 37, 52, and 31 and 21, 14, and 34 % removal of Pb(II), Cr(III), and Cd(II), respectively. Langmuir was the best model for a single system. While extended Langmuir was the best model for binary and ternary metal systems. The maximum uptake capacities were 54.92, 34.78, and 29.99 mg/g and pore diffusion coefficients were 7.23, 3.15, and 2.76 × 10⁻¹¹ m²/s for Pb(II), Cr(III), and Cd(II), respectively. Optimum pH was found to be 4. Pseudo-second-order was the best model to predict the kinetic process. Biosorption process was exothermic and physical in nature. CONCLUSIONS: Pb(II) offers the strongest component that is able to displace Cr(III) and Cd(II) from their sites, while Cd(II) ions are the weakest adsorbed component.