To investigate the effect of organic matter evolution on heavy metal sorption, fluorescence excitation–emission matrix (EEM) spectra combined with parallel factor (PARAFAC) analysis were employed to characterize the evolution and metal-complexing potential of fluorescent water-extractable organic matter (WEOM) from composted municipal solid wastes (MSWs). The WEOMs examined comprised humic-, fulvic-, tryptophan-, and tyrosine-like substances. Composting treatment increased the content of humic- and fulvic-like matter, and changed the existence pattern of tryptophan- and tyrosine-like substances (i.e., the tryptophan- and tyrosine-like substances from uncomposted MSWs were mainly bound in protein-like matter, whereas those from composted MSWs were primarily bound in humic- and fulvic-like substances). Furthermore, composting treatment increased the polar functional group, aromaticity, and humification degree of the WEOMs, but decreased the aliphatic and hydroxyl group. These evolutions decreased the Cu(II) affinities of fulvic- and humic-like substances and the Pb(II) affinities and complexing capacities of fulvic-like substances, but increased the Cu(II) complexing capacities of fulvic- and humic-like substances. These results reveal that mature composts from the MSWs can be used for the remediation of Cu- and Pb-contaminated soils in situ, whereas immature composts can enhance the metal transferability from soil to plant.

The coking wastewater generally comprises highly concentrated, recalcitrant, and toxic organic pollutants, so its treatment has been of great importance to prevent living beings and their environment from these hazardous contaminations. The treatment of pretreated coking wastewater by flocculation-coagulation, alkali out, air stripping, and three-dimensional (3-D) electrocatalytic oxidation was performed (gap between the used β-PbO₂/Ti anode and titanium cathode, 12 mm; mass ratio of Cu-Mn/granular activated carbon (GAC) to effluent, 1:4; cell voltage, 7 V). The results showed that the pH adjusting from 3.7 to 6.1 was necessary for coagulants; alkali out played an important role because it brought up precipitation containing higher fatty acids as well as other contaminants to decrease the chemical oxygen demand (COD) in the effluent, and it had also forced the reduction of ammonia nitrogen (NH₃-N) by incorporating with air stripping; for 3-D electrocatalytic oxidation with a bleaching liquid assisting, the initial pH 8.5 of effluent was suitable for Cu-Mn/GAC; moreover, it was considered that its Cu component was dedicated to the decrease of COD and NH₃-N, while the Mn component specialized in the decay of NH₃-N. The residual COD and NH₃-N values in the final effluent with pH 6.5 were 95.8 and 8.8 mg/L, respectively, demonstrating that the whole processes applied were feasible and low in cost.

Nanoscale zero-valent iron (nZVI) has recently gained great interest in the scientific community as in situ reagent for installation of permeable reactive barriers in aquifer systems, since nZVI is highly reactive with chlorinated compounds and may render them to harmless substances. However, nZVI has a high tendency to agglomerate and sediment; therefore it shows very limited transport ranges. One new approach to overcome the limited transport of nZVI in porous media is using a suited carrier colloid. In this study we tested mobility of a carbon colloid supported nZVI particle “Carbo-Iron Colloids” (CIC) with a mean size of 0.63 μm in a column experiment of 40 cm length and an experiment in a two-dimensional (2D) aquifer test system with dimensions of 110 × 40 × 5 cm. Results show a breakthrough maximum of 82 % of the input concentration in the column experiment and 58 % in the 2D-aquifer test system. Detected residuals in porous media suggest a strong particle deposition in the first centimeters and few depositions in the porous media in the further travel path. Overall, this suggests a high mobility in porous media which might be a significant enhancement compared to bare or polyanionic stabilized nZVI.

Acetaminophen is globally one of the most prescribed drugs due to its antipyretic and analgesic properties. However, it is highly toxic when the dosage surpasses the detoxification capability of an exposed organism, with involvement of an already described oxidative stress pathway. To address the issue of the ecotoxicity of acetaminophen, we performed acute exposures of two aquatic plant species, Lemna gibba and Lemna minor, to this compound. The selected biomarkers were number of fronds, biomass, chlorophyll content, lipid peroxidation (TBARS assay), and proline content. Our results showed marked differences between the two species. Acetaminophen caused a significant decrease in the number of fronds (EC₅₀ = 446.6 mg/L), and the establishment of a dose-dependent peroxidative damage in L. minor, but not in L. gibba. No effects were reported in both species for the indicative parameters chlorophyll content and total biomass. However, the proline content in L. gibba was substantially reduced. The overall conclusions point to the occurrence of an oxidative stress scenario more prominent for L. minor. However, the mechanisms that allowed L. gibba to cope with acetaminophen exposure were distinct from those reported for L. minor, with the likely involvement of proline as antioxidant.

The growing need to evaluate the quality of aquatic ecosystems led to the development of numerous monitoring tools. Among them, the development of biomarker-based procedures, that combine precocity and relevance, is recommended. However, multi-biomarker approaches are often hard to interpret, and produce results that are not easy to integrate in the environmental policies framework. Integrative index have been developed, and one of the most used is the integrated biomarker response (IBR). However, an analysis of available literature demonstrated that the IBR suffers from a frequent misuse and a bias in its calculation. Then, we propose here a new calculation method based on both a more simple formula and a permutation procedure. Together, these improvements should rightly avoid the misuse and bias that were recorded. Additionally, a case study illustrates how the new procedure enabled to perform a reliable classification of site along a pollution gradient based on biomarker responses used in the IBR calculations.

In this study, the degradation of molinate through heterogeneous photocatalysis, using two different types of the semiconductor TiO₂ as photocatalyst, as well as through homogeneous treatment, applying the photo-Fenton reaction, has been investigated. As far as heterogeneous photocatalysis is concerned, the degradation of the pesticide follows apparent first-order kinetics, while the type of the catalyst and the pH value of the solution affect the degradation rate. The effect of the addition of electron scavengers (H₂O₂ and K₂S₂O₈) was also studied. In the case of photo-Fenton-assisted system, the degradation also follows pseudo-first-order kinetics. Parameters such as iron’s and electron scavenger’s concentration and inorganic ions strongly affect the degradation rate. The extent of pesticide mineralization was investigated using dissolved organic carbon (DOC) measurements. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fischeri. The detoxification and mineralization efficiency was found to be dependent on the system studied, and although it did not follow the rate of pesticide disappearance, it took place in considerable extent. The study of the photodegradation treatment was completed by the determination of the intermediate by-products formed during the process, which was carried out using LC-MS/MS technique and led to similar compounds with both processes.

The relevance of a risk assessment of the built heritage was clearly justified due to the fact that it acts as a pollutant repository and hazardous pollutants have the capacity to penetrate into materials. However, the limitation of the sampling processes due to the high value of the built heritage makes a correct evaluation difficult. For that reason, in the present work, the potential of agar gels as non-invasive samplers of built heritage deterioration products, like crusts and patinas, was evaluated. Different gels of agar and Carbopol® (as control gel) were applied on these built surfaces considering several factors: the treatment time, the effectiveness of the addition of EDTA (ethylenediaminetetraacetic acid, C₁₀H₁₆N₂O₈) and its concentration and the use of a buffer at pH 7.5. All these factors were evaluated in order to determine the capacity of these gels as sampling systems under non-controlled atmospheric conditions. The results obtained in the assays were evaluated by visual examination, by evolution of pH and by the most important techniques used in the risk assessment analysis of the built heritage (Raman spectroscopy, scanning electron microscope (SEM)/energy dispersive X-ray (EDX) and inductively coupled plasma mass spectrometry (ICP-MS)). In this evaluation, the agar gels showed an intrinsic capacity as sampler with respect to the gel Carbopol® and thus, the best option between the studied gels consisted on agar gels with 2 % of EDTA and the longest application time. On the whole, the agar gels showed an interesting potential as non-invasive samplers of built heritage deterioration materials which should be studied more in depth.

The treatment of a non-biodegradable agrochemical wastewater has been studied by coupling of preliminary coagulation—flocculation step and further Fenton oxidation. High percentages of chemical oxygen demand (COD) removal (up to 58 %) were achieved in a first step using polyferric chloride as coagulant. This reduced significantly the amount of H₂O₂ required in the further Fenton oxidation. Using the stoichiometric amount relative to COD around 80 % of the remaining organic load was mineralized. The combined treatment allowed achieving the regional discharge limits of ecotoxicity at a cost substantially lower than the solution used so far where these wastewaters are managed as hazardous wastes.

In this study, thermal desorption was combined with the addition of nano zerovalent iron (nZVI) to remediate polychlorinated biphenyl (PCB)-contaminated soil collected from a storage point for PCB-contaminated capacitors and transformers. The thermal desorption test conditions were varied from 300 to 600 °C, both with blank soil and with 100 mg of nZVI added. Next, the effect of the amount of nZVI added (0, 20, 40, 100, 200 mg) was investigated by thermal treatment at 400 °C. The test results show that thermal desorption eliminates most of the PCB load and that the presence of nZVI clearly enhances thermal desorption. After thermal treatment at 400 °C, a removal efficiency of 94.2 % was reached, with the use of 200 mg of nZVI. At 600 °C, the PCB removal efficiency after 1 h attained 98.35 % with 100 mg of nZVI and 97.40 % without nZVI. The presence of nZVI effectively decreased both the sum and the WHO-TEQ value of the 12 dl-PCBs.

Total suspended and size-segregated atmospheric particles were collected in four seasons at three representative points in different functional areas of Dongguan City. The detailed size distributions of six nitro-PAHs [2-nitrofluorene (2-NF), 9-nitroanthracene, 2-nitrofluoranthene (2-NFL), 3-nitrofluoranthene, 1-nitropyrene, and 2-nitropyrene (2-NP)] were determined by high-performance liquid chromatography (HPLC) with UV detection using a binary elution gradient (methanol and water). We used a toxicity assessment based on potency equivalency factors (PEFs) to estimate the inhalation risk of the particulate matter. The results showed that, aside from 2-NF and 2-NFL, the content of the other four nitro-PAHs in the microparticles (<0.4 μm) were more than 20 %, a percentage significantly higher than other fractions of particulate matter. The seasonal distribution of nitro-PAHs shows that their concentrations were higher in the winter, while the PAH concentrations were higher in the summer. The study found that secondary formation (2-NFL and 2-NP) had a positive correlation with NO ₓ and NO₂, but a negative correlation with O₃. The benzo[a]pyrene equivalent (BaPeq) toxicity of particulate matter in Dongguan City ranged from 0.04 to 2.63 ng m⁻³, and the carcinogenic index ranged from 0.04 × 10⁻⁶to 2.39 × 10⁻⁶. These values do not represent a serious threat to human health.