A novel composite with an enhanced photocatalytic activity was prepared and applied to study the removal of bezafibrate (BZF), a hypolypemic pharmaceutical, from an aqueous environment. For the enhancement of titanium dioxide photoactivity a fullerene derivative, 2-(ferrocenyl) fulleropyrrolidine (FcC₆₀), was synthesized and applied. Obtained composite was found to show a higher catalytic activity than pristine TiO₂. Therefore, high hopes are set in composites that are based on carbonaceous nanomaterials and TiO₂as a new efficient photocatalysts.

Terephthalic acid (TA) is considered as a refractory model compound. For this reason, the TA degradation usually requires a prolonged reaction time to achieve mineralization. In this study, vanadium oxide (VₓOy) supported on titanium oxide (TiO₂) served as a photocatalyst in the ozonation of the TA with light-emitting diodes (LEDs), having a bandwidth centered at 452 nm. The modified catalyst (VₓOy/TiO₂) in combination with ozone and LEDs improved the TA degradation and its by-products. The results obtained by this system were compared with photolysis, single ozonation, catalytic ozonation, and photocatalytic ozonation of VₓOy/TiO₂ with UV lamp. The LED-based photocatalytic ozonation showed almost the same decomposition efficiency of the TA, but it was better in comparison with the use of UV lamp. The oxalic acid accumulation, as the final product of the TA decomposition, was directly influenced by either the presence of VₓOy or/and the LED irradiation. Several by-products formed during the TA degradation, such as muconic, fumaric, and oxalic acids, were identified. Besides, two unidentified by-products were completely removed during the observed time (60 min). It was proposed that the TA elimination in the presence of VₓOy/TiO₂ as catalyst was carried out by the combination of different mechanisms: molecular ozone reaction, indirect mechanism conducted by ·OH, and the surface complex formation.

The ozonation involved in drinking water treatment raises issues of water quality security when the raw water contains bromide (Br⁻). Br⁻ions may be converted to bromate (BrO₃⁻) during ozonation and some brominated disinfection by-products (Br-DBPs) in the following chlorination. In this study, the effects of ozone (O₃) dosage, contact time, pH, and Br⁻and ammonia (NH₃-N) concentrations on the formation of BrO₃⁻and Br-DBPs have been investigated. The results show that decreasing the initial Br⁻concentration is an effective means of controlling the formation of BrO₃⁻. When the concentration of Br⁻was lower than 100 μg/L, by keeping the ratio of O₃dosage to dissolved organic carbon (DOC) concentration at less than 1, BrO₃⁻production was effectively suppressed. The concentration of BrO₃⁻steadily increased with increasing O₃dosage at high Br⁻concentration (>900 μg/L). Additionally, a longer ozonation time increased the concentrations of BrO₃⁻and total organic bromine (TOBr), while it had less impact on the formation potentials of brominated trihalomethanes (Br-THMFP) and haloacetic acids (Br-HAAFP). Higher pH value and the presence of ammonia may lead to an increase in the formation potential of BrO₃⁻and Br-DBPs.

Lead (Pb) is the most common heavy metal contaminant in the environment. The present study was undertaken to determine the effect of Pb treatment on medicarpin production and accumulation in Medicago sativa L. To this aim, 7- and 30-day-old plants were treated with 0, 120, 240, 500, and 1,000 μM Pb during 10 days. The content of medicarpin was determined by HPLC, and the extent of medicarpin production was deduced from the result of semiquantitative RT-PCR performed on PAL, CHS, and VR genes. HPLC results indicated that medicarpin concentration has been reduced in the roots, while its exudation to the culture medium has been increased. RT-PCR results indicated that the transcript levels of PAL, CHS, and VR genes have not been affected following Pb stress in seedlings. At the vegetative stage, transcript levels of PAL and CHS genes have been reduced in the roots. However, the transcript level of VR gene increased at 120 and 240 μM Pb, while it decreased at higher concentrations. In the shoot, the transcript levels of PAL, CHS, and VR genes were increased following increased concentration of lead in the medium. Overall, q-PCR results suggest that medicarpin biosynthesis has been induced in the shoots and reduced in the roots of the plants treated with a toxic concentration of Pb.

Municipal solid wastes (MSW) are unavoidable sources of environmental pollution. Improper disposal of municipal waste results in the leaching of toxic metals and organic chemicals, which can contaminate the surface and ground water leading to serious health hazard. In this study, the toxic effects of the leachate prepared from municipal solid waste samples were examined in root meristem cells of barley (Hordeum vulgare L.) at various stages of cell cycle, i.e., G₁, S, and G₂. Seeds of barley were exposed to 2.5, 5, and 10 % of leachates in soil and aqueous media in 48 h at different cell cycle stages. The physicochemical data of the present study revealed that municipal solid waste leachate contains high amount of heavy metals, which significantly affected growth and physiological activities of barley. Significant inhibition in hypocotyl length, germination, and mitotic index were observed at all concentration of leachate treatment. Induction of chromosomal aberrations (CA’s) and micronuclei (MN) formation were also observed with different concentrations of leachate treatment at 7, 17, and 27 h of presoaking durations, which falls in G₁, S, and G₂phase of the cell cycle, respectively. Also, exposure of leachate at S phase of the cell cycle had significant effects in barley through chromosomal aberration and micronuclei formation.

Perchlorate concentrations in rice samples from many different provinces, and correlation with surface water contamination, were investigated in the Republic of Korea. Perchlorate levels in the 51 rice samples purchased from local markets ranged from below the detection limit to 1.79 ± 0.39 μg/kg with a mean level of 0.21 μg/kg and 7 samples collected from the Nakdong River watershed ranged from 0.38 ± 0.1 to 3.23 ± 0.47 μg/kg with a mean level of 0.9 μg/kg. The correlation coefficient between perchlorate levels in rice samples from the Nakdong river watershed and the levels in surface water was estimated to be approximately 0.904 in the 95 % confidence interval. These results show that surface water contamination was highly related to the perchlorate pollution of rice in the Republic of Korea.

Anogenital distance (AGD), a useful anthropometric measurement for genital development in both animals and humans, was originally found by reproductive toxicologists in rodent experiments. As an easy-to-measure and sensitive marker, AGD has become a bioassay of fetal androgen action and a well-established reproductive toxicity endpoint in animals. It is generally accepted that AGD is sexually dimorphic in many mammals, with males having longer AGD than females. Exposure to proposed endocrine disruptors may result in reduced AGD; thus, it has been used to measure health effects of compounds with endocrine-altering properties or endocrine-disrupting chemicals (EDCs) in environmental toxicology. Moreover, AGD is an important clinical measure to address endocrine-sensitive endpoints in the first year of life and to assess the adverse impact of in utero exposure to environmental EDCs. Recently, AGD has been identified as one of the endpoints in the US Environmental Protection Agency guidelines for reproductive toxicity studies in humans, but use of AGD in human studies is still rare, and the results remain mixed and inconclusive due to many reasons. In order to achieve a breakthrough, researchers are endeavoring to standardize the measurement of AGD, normalize age-specific population data in different ethnic groups, and conduct more in-depth human researches in this field.

Twenty-nine sediment samples were collected from Lake Chaohu, a shallow eutrophic lake in Eastern China, and were analyzed for 15 priority polycyclic aromatic hydrocarbons (PAHs) to determine the spatial distribution and exposure risks of PAHs. Three receptor models, the principal component analysis-multiple linear regression (PCA-MLR) model, the positive matrix factorization (PMF) model, and the Unmix model, were used in combination with the PAHs diagnostic ratios to investigate the potential source apportionment of PAHs. A clear gradient in the spatial distribution and the potential toxicity of PAHs was observed from west to east in the sediments of Lake Chaohu. ∑₁₅PAH concentrations and the TEQ were in the range of 80.82-30 365.01 ng g⁻¹ d.w. and 40.77-614.03, respectively. The highest values of the aforementioned variables were attributed to urban–industrial pollution sources in the west lake region, and the levels decreased away from the river inlets. The three different models yielded excellent correlation coefficients between the predicted and measured levels of the 15 PAH compounds. Similarly, source apportionment results were derived from the three receptor models and the PAH diagnostic ratios, suggesting that the highest contribution to the PAHs was from coal combustion and wood combustion, followed by vehicular emissions. The PMF model yielded the following contributions to the PAHs from gasoline combustion, diesel combustion, unburned petroleum emissions, and wood combustion: 34.49, 24.61, 16.11, 13.01, and 11.78 %, respectively. The PMF model produced more detailed source apportionment results for the PAHs than the PCA-MLR and Unmix models.

In a research project on risk management of harmful substances in water cycles, clindamycin and 12 further antibiotics were determined in different sewage samples. In contrast to other antibiotics, an increase of the clindamycin concentration in the final effluent in comparison to the influent of the sewage treatment plant (STP) was observed. A back transformation from the main metabolite clindamycin sulfoxide to clindamycin during the denitrification process has been discussed. Therefore, the concentration of this metabolite was measured additionally. Clindamycin sulfoxide was stable in the STP and the assumption of back transformation of the metabolite to clindamycin was confuted. To explain the increasing clindamycin concentration in the STP, the ratio of clindamycin sulfoxide to clindamycin was observed. The ratio increased in dry spells with concentrated samples and with long dwell time in the sewer system. A short hydraulic retention in waste water system and diluted samples in periods of extreme rainfall lead to a lower ratio of clindamycin sulfoxide to clindamycin concentration. A plausible explanation of this behavior could be that clindamycin was adsorbed strongly to a component of the sewage during this long residence time and in the STP, clindamycin was released. In the common sample preparation in the lab, clindamycin was not released. Measurements of clindamycin and clindamycin sulfoxide in the influent and effluent of STP is advised for sewage monitoring.

Among the different organic pollutants, persistent organic pollutants and emerging organic contaminants (EOCs) are of particular concern due to their potentially dangerous effects on the ecosystems and on human health. In the framework of the analysis of some of these organic pollutants in water samples, sorptive extraction devices have proven to be adequate for their monitoring. The efficiency of four commercially available and low-cost polymeric materials [polypropylene, poly(ethylene terephthalate), Raffia, and polyethersulfone (PES)] for the simultaneous extraction of 16 organic compounds from five different families from environmental water samples was evaluated in this work. Firstly, the homogeneity of the sorbent materials was confirmed by means of Raman spectroscopy. After the optimization of the parameters affecting the extraction and the liquid desorption steps, it was found that PES showed the largest efficiencies for slightly polar analytes and, to a lesser extent, for nonpolar analytes. Additionally, Raffia rendered good extraction efficiencies for nonpolar compounds. Thus sorptive extraction methods followed by large volume injection-programmable temperature vaporizer-gas chromatography-mass spectrometry were validated using PES and Raffia as sorbent materials. The validation of the method provided good linearity (0.978 < r ² < 0.999 for PES and 0.977 < r ² < 0.999 for Raffia), adequate repeatability (below 19 % and 14 % for PES and Raffia, respectively), and low method detection limits (low ng · l⁻¹ level). Finally, these materials were applied to the analysis of contaminants in environmental water samples.