Nitrogen removal by anammox process has been recognized as efficient, cost-effective, and low-energy alternative removal. The longer start-up periods of anammox process hindered the widespread application of anammox-based technology. In this study, four identical unplanted subsurface-flow constructed wetlands (USFCWs) were built up to investigate the effects of electron acceptors (Fe³⁺, Mn⁴⁺, SO₄²⁻) on the start-up of anammox process. Results indicated that the start-up time of anammox process was shortened to 105 days in R1 (with Fe³⁺ addition) and 110 days in R2 (with Mn⁴⁺ addition) with nitrogen removal efficiencies of above 75%, compared with 148 days in R0 (control). The addition of SO₄²⁻ had no significant effect on start-up process. High-throughput sequencing results demonstrated that Shannon index increased significantly from 2.87 (R0) to 5.08 (R1) and 5.00 (R2), and the relative abundance of Candidatus Anammoxoglobus rose from 3.6 to 5.3% in R1. Denitratisoma increased significantly in R2 under addition of Mn⁴⁺, which was beneficial for the occurrence of anammox process. The functional genes that related to signal transduction mechanisms and secondary metabolite biosynthesis, transport, and catabolism were upregulated after addition of electron acceptors. These results demonstrated that adding electron acceptors Fe³⁺ or Mn⁴⁺ could be an effective way to accelerate the start-up of anammox process. Graphical abstract ᅟ

Pistia stratiotes is a common aquatic plant of the northern region of the state of Rio de Janeiro, and its use as adsorbent material was studied in the present work. The preparation process included washing, drying, grinding, and acid activation. The sorption potential for removal of the indigo carmine dye from aqueous solutions was tested under various conditions, such as initial concentration, contact time, and temperature. The tests showed that the obtained biosorbent showed good performance for dye removal with a maximum capacity of 41.2 mg/g. The kinetic studies revealed that the pseudo-second-order equation provided the best fit of the experimental data. The Freundlich isotherm provided the best fit of the experimental sorption data for the system under study. The results obtained show that Pistia stratiotes has great potential to be used as biosorbent for the removal of dyes from aqueous solutions.

Soil contamination with polychlorinated biphenyls (PCBs) is one the most relevant environmental problem in the SIN (Site of National Interest) of Taranto (Apulia Region, Southern Italy) and the surrounding area. Evaluation of PCB contents and their spatial distribution is an essential pre-requisite for soil remediation. Conventional laboratory analyses, although useful and irreplaceable for a precise and detailed evaluation of these contaminants, are costly and time-consuming, thus not very suitable for investigation over large areas. Then, there is a need to develop/validate alternative, rapid and cost-effective techniques, to use as substitutive of integrative to conventional analytical approaches. In this study, the usefulness of soil colour, based on spectrometric measurements, coupled with regression analysis, was assessed. Until now, never an analogous investigation has been realised. Twenty-eight soil samples, previously collected within an area (the ex-MATRA) highly contaminated by the disposal of oil used as dielectric fluid, composed by a mixture of PCB congeners, were used in the investigation. Colour coordinates in different colour systems were calculated from spectroradiometric measurements over the soil samples. Eighteen PCB congeners (i.e. 12 dioxin-like PCBs and six non-dioxin-like “indicator” PCBs), their sum (PCBs₁₈) and the extractable organic halogen content (EOX)—which is an expression of the total content of halogen in organochlorine compounds, including the PCBs—were determined through conventional laboratory analysis. Simple linear regression analysis was carried out to predict the values of PCBs and EOX on the basis of colour variables. Excellent predictive models (R² > 0.80) for PCBs₁₈ and EOX, as well as for some of the individual PCB congener, resulted from the regression analysis. Thus, spectroscopic determination of soil colour can be considered as a promising tool for a rapid screening of PCBs in contaminated soils.

Plants of the order Brassicaceae have evolved a chemical defence against herbivory: the glucosinolate-myrosinase system. Mechanical damage to plant tissues, such as grazing, initiates the production of phenethyl isothiocyanate (PEITC), a compound toxic to invertebrates. Mechanical damage caused during biofumigation and the harvesting and washing of watercress presents routes for PEITC release into waterbodies, such as the chalk stream spawning sites of brown trout (Salmo trutta). This laboratory study exposed developing S. trutta embryos to PEITC at concentrations of 0.01, 0.1 and 1 μg/L. S. trutta exposed to 1 μg/L PEITC during embryonic development resulted in 100% mortality after four dose days. Exposure to 0.1 μg/L PEITC resulted in an approximate fourfold increase in mortality relative to the controls, while exposure to 0.01 μg/L PEITC had a negligible effect on embryo mortality. Embryos exposed to 0.1 μg/L PEITC showed a significant delay in hatching and produced alevins with significantly shorter total lengths, lighter body weights and an approximate threefold increase in spinal deformities relative to those exposed to the controls and 0.01 μg/L PEITC. The results of a motor activity assay demonstrate that alevins exposed to PEITC showed a significant decrease in swimming activity compared with control animals during periods of illumination. The increased mortality, teratogenic effects and impaired behaviour in S. trutta following embryonic exposure to relatively low concentrations of PEITC highlight a need to accurately quantify and monitor environmental levels of PEITC.

Inferring causality has long been a challenging task in environmental impact studies and monitoring programs, mostly because of the problem of confounding bias, i.e. the difficulty of separating impact from natural variation. Traditional approaches for dealing with confounding, despite improvements in study design and statistical analysis, are inadequate. Using aquatic biota as a case study, this review explains the limitations of traditional methods used to separate the impact of human-made pollution from natural variation in the environment. Advantages and disadvantages of the traditional and novel techniques are enumerated. Bayesian networks (BNs) and structural equation modelling (SEM) as causal modelling techniques are introduced as approaches to improve environmental impact monitoring.

A previously isolated indigenous strain of Pseudomonas sp. was used to treat effluents, a synthetic and an industrial-containing benzalkonium chloride (BAC), in continuous upflow biofilm aerobic reactors. The reactor used to treat the synthetic effluent was constructed from Plexiglas® and filled with hollow polyvinyl chloride (PVC) cylinders as support material, whereas the one used to treat the industrial effluent was constructed from PVC and had a high recirculation flow rate and lightweight expanded clay aggregate (LECA®) as support material. Biodegradation was evaluated by spectrophotometry, HPLC, and microbial growth. Detoxification was evaluated by using Vibrio fisheri, Pseudokirchneriella subcapitata, and Lactuca sativa as test organisms. Maximal BAC influent concentrations were of 383.4 and 1172.0 mg L⁻¹ respectively, which corresponds to a maximal organic load of 49.8 and 146.5 g BAC m⁻³ day⁻¹. The efficiency of the reactors was higher than 99.3% in terms of compound removal and 97.0% in terms of COD removal. Complete detoxification of the effluent was demonstrated for the synthetic effluent, whereas a toxicity removal higher than 97% was reached in the case of the industrial effluent. The promising behavior of the isolated indigenous strain to degrade BAC in continuous reactors allows us to suggest its possible use in remediation processes.

Chemical treatment could improve the adsorption performance of biochars (BC). In order to deal with Pb(II) pollution, four types of biochars including unmodified, acid-treated, alkali-treated, and magnetic-treated pig manure-derived biochars (PBCs) were prepared. The effect of chemical treatment on the physical property, chemical composition, and the adsorption behavior of biochars was compared. Magnetic and alkali treatment improved pore volume and specific surface areas, and the adsorption capacity and rates were enhanced. In contrast, the adsorption capacity of acid-treated BC decreased due to the significant decrease of ash content. The magnetic samples displayed the satisfactory absorption performance, which could achieve 99.8% removal efficiency within 15 min at a Pb(II) concentration of 50 mg/L. Considering its properties of excellent adsorption performance, fast reaction rate, and convenient recovery by an external magnetic field, magnetic biochar based on pig manure may provide an effective way to remove heavy metals and decrease the pig manure solid waste.

The issues of heavy metal contamination in water sources have been increasing substantially along with the rapid pace of industrial revolution. Lead, particularly, is one of the heavy metals that received considerable attention lately due to its frequent detection in the environment and hazardous effects. Although conventional water treatment processes had been utilized for ages, it is still a challenge to remove lead in the treatment plant effectively. In line with the advancement of chemistry and nanotechnology, the study on hydroxyapatite (HAp) nanopowder made from fish waste (skin, bones, and scales) has brought to its beneficial use as an adsorbent for lead removal in water. This paper reviews on the sources, occurrences, and health effects of lead as well as the treatment of lead using HAp adsorbent for its removal in water.

Crude water extract of the ground longan seeds which have been disposed in a large amount annually in Northern Thailand has been used in a simple and rapid microwave synthesis of ZnO nanoparticles. The particles were characterized by the UV-vis spectroscopy, Fourier-transformed infrared spectroscopy, X-ray diffraction, electron diffraction, energy dispersive X-ray spectroscopy, and transmission electron microscopy and revealed to be pure hexagonal phase. Influences of zinc precursor in the extract, microwave power, and irradiation time on particle sizes were studied. The use of 800 W and 30 cycles of the microwave irradiation provided the ZnO particles of 10–100 nm in size with an active surface area, a band gap energy, and a zero-point charge of 35 m²·g⁻¹, 3.42 eV, and pH 7.7, respectively, after the calcination. Photocatalytic efficiencies of the synthesized particles were evaluated through the decolorization of methylene blue, malachite green, methyl orange, and orange II, and proved to be on par with commercially available titanium dioxide (Arroxide®P-25) under the same conditions. The use of the longan seeds biowaste as a sustainable supply of natural reagents for the green synthesis of ZnO nanoparticles which can be employed further for waste water treatment of the local textile dyeing industry is therefore presented. Graphical Abstract

The application of conventional physicochemical and microbiological techniques for the removal of organic pollutants has limitations for its utilization on wastewaters as landfill leachates because of their high concentration of not easily biodegradable organic compounds. The use of ozone-based technologies is an alternative and complementary treatment for this type of wastewaters. This paper reports the study of the degradation of landfill leachates from different stages of a treatment plant using ozone and ozone + UV. The experimental work included the determination of the temporal evolution of COD, TOC, UV254, and color. Along the experimental runs, the instantaneous off-gas ozone concentration was measured. The reaction kinetics follows a global second order expression with respect to COD and ozone concentrations. A kinetic model which takes into account the gas liquid mass transfer coupled with the chemical reaction was developed, and the corresponding parameters of the reacting system were determined. The mathematical model is able to appropriately simulate COD and ozone concentrations but exhibiting limitations when varying the leachate type. The potential application of ozone was verified, although the estimated efficiencies for COD removal and ozone consumption as well as the effect of UV radiation show variations on their trends. In this sense, it is interesting to note that the relative ozone yield has significant oscillations as the reaction proceeds. Finally, the set of experimental results demonstrates the crucial importance of the selection of process conditions to improve ozone efficiencies. This approach should consider variations in the ozone supply in order to minimize losses as well as the design of exhaustion methods as multiple stage reactors using chemical engineering design tools.