We used a section-segment method to determine the copper (Cu) fluxes from the Yangtze River to the East China Sea during 2012–2016 in this study, including the maximum, minimum and mean annual fluxes of dissolved and suspended Cu. The Cu fluxes exhibited a pronounced inter-annual variability. June was characterized with the highest monthly dissolved and suspended Cu fluxes, while the lowest monthly Cu fluxes was in February. The monthly Cu concentration and Cu fluxes both increased from January to June and decreased from July to December. The monthly Cu fluxes showed a positive correlation with the water flux and monthly mean Cu concentration; however, it had a negative correlation with the ratio of tidal flux to river runoff flux. Both natural (53%) and anthropogenic inputs (32.8%) were the main sources of Cu. The discharges of industrial and domestic sewage wastewater were the main anthropogenic factors affecting the entry of Cu.

This study is focused on delivery and fate of floating marine litter (FML) carried by rivers to coastal sea. We examine a large flooding event which happened in the northeastern part of the Black Sea in October 2018. A high resolution circulation model coupled with a Lagrangian particle model is applied to simulate transport of riverine FML in the coastal sea. During this flood multiple river plumes in the study area coalesced into one stripe of freshened water which occupied large segment of coastal sea along the shoreline. Riverine FML was transported within this stripe far off its sources in river mouths and remained arrested near the shore. As a result, approximately half of the discharged FML was washed ashore by the Stokes drift. FML, which remained in the sea, accumulated at convergence lines associated with large salinity gradients at the fronts between the river plumes and the ambient sea.

Here, we examined the coral bleaching responses during the 2016 thermal stress event and post-bleaching changes in coral communities in the heavily disturbed reefs of the Bolinao-Anda Reef Complex (BARC), northwestern Philippines. Less than 25% of colonies bleached, with 77% attributed to five genera (Dipsastrea, Porites, Fungia, Seriatopora, and Montipora). Coral bleaching prevalence was associated with site location, coral composition, and coral abundance, suggesting that small-scale variation (<20 km) in coral communities (taxa and density) influences spatial variation in coral bleaching prevalence. There was no noticeable change in coral composition and cover two years after the bleaching event as exposure to chronic disturbance likely selected for the dominance of stress tolerant coral taxa and communities. Results show that the 2016 thermal stress event caused coral bleaching but with low prevalence at the BARC, which suggests that disturbed reefs may provide spatial refuge to coral communities from thermal stress.

Sandstone reefs may be considered a unique geomorphologic feature within the subtropical Southwestern Atlantic Ocean region; however, biodiversity on these reefs has received little to no attention. Herein, we recorded the fish assemblage and benthic cover of sandstone reefs between 23 and 29 m depth in Southern Brazil and evidenced potential threats to habitat health. Video analysis and underwater censuses recorded 30 fish species. The unexpected high biomass of Epinephelus marginatus indicated that sandstone reefs may contain suitable habitats for the recovery of this endangered species. A rich benthic coverage including bryozoans, algae, hydrozoans, sponges, and octocorals increased local habitat structural complexity. However, a wide diversity of tangled fishing gear and broken sandstone slabs suggested that a valuable feature from Southern Brazil seascape is being lost by cumulative fishing impacts. An extensive mapping of sandstone reefs is urgently needed for better delineation of marine protected areas network in Southeast and Southern Brazil.

A model is proposed for the beach process of buoyant marine plastics, specifically its beaching and backwashing, by introducing beaching and backwashing diffusion coefficients and the onshore-offshore advection-diffusion equations of plastics for the upper layers in the beach and adjacent coastal sea. The backwashing diffusion coefficient was estimated from the average residence time of the beached plastics and the beach width, and then the beaching diffusion coefficient was estimated from the flux-balance assumption between the beaching and backwashing fluxes. Finite difference calculations in the staggered-grid system demonstrated that the amount of beached plastics responds as predicted by the linear system analysis when the beach had an exponential decay type of unit impulse response regardless of the ratio between the residence time and the period of beaching flux fluctuation from the nearshore. The condition in which the flux balance assumption holds was also discussed.

PURPOSE OF THE REVIEW: Freshwater wetlands are found in various climatic zones ranging from tropics to tundra, and their roles from groundwater recharge and flood control to water quality management and biodiversity protection are well recognized. Phosphorus (P) is a limiting nutrient for algal growth in freshwater systems, including wetlands. Various physico-chemical and biological characteristics of wetlands regulate cycles of nutrients such as P. Thus, estimating internal loading of P in wetlands would be crucial in the formulation of effective P management strategies in the wetland systems. This review and limnological data presented may offer needed knowledge/evidence for the effective control of P inputs in wetlands and provide insights on possible ways for interventions in controlling eutrophication and saving the ecosystem from collapse. RECENT FINDINGS: Various ways of P losses such as agriculture, urbanization, etc., to the water bodies have severely impacted water quality of wetlands by altering physical and chemical nature of the P compounds and release bound P to the water columns. Studies indicate that P sorption–desorption dynamic, mineralization, and enzymatic hydrolysis of P in freshwater wetlands’ soils/sediments are crucial in causing internal loading or sink of P in wetland systems. Thus, extensive studies on abovementioned arenas are crucial to restore natural freshwater wetlands or to increase the efficiency of constructed wetlands in retaining P. In general, researchers have elucidated significant amounts of limnological data to understand eutrophication processes in freshwater wetlands; however, studies on the interactions of P stability and hydro-climatic changes are not well understood. Such changes could significantly influence localized limnology/microenvironments and exacerbate internal P loading in freshwater wetlands; thus, studies in such direction deserve the attention of scientific communities.

Due to rapid urbanization and industrialization, heavy metal (HM) pollution in coastal areas of the East China Sea (ECS) has attracted extensive attention. This article attempts to review recent studies on the temporal and spatial distributions, ecological risks, and possible sources of HMs in typical bays and estuaries of ECS. The levels of HMs are closely related to local economic development and local characteristics. The anthropogenic activities and the particle size of sediments are important factors affecting the distribution of HMs. During the late 1970s to the 1990s, HMs levels in the Yangtze Estuary (YRE) sediments showed an upward tendency due to the increased emissions. However, HMs levels in the early 2000s were lower than that in the late 1970s to the mid-1990s. Cd caused serious pollution and brought potential ecological risks in the Yangtze Estuary, Hangzhou Bay (HZB), Sanmen Bay (SMB), and Quanzhou Bay (QZB). In Fujian province of China, the Quanzhou Bay was heavily polluted by HMs and high contents of HMs were found in biota. Among different species, molluscs in the coastal areas of ECS have the highest levels of HMs exceeding safety limits.

In this study, Bacillus cereus was cultivated in a mineral medium composed of 2% frying oil and 0.12% peptone to produce a biosurfactant. The production was scaled up from flasks to 1.2-, 3.0- and 50-L bioreactors, where surface tension achieved 28.7, 27.5 and 32 mN/m and biosurfactant concentration 4.3, 4.6 and 4.7 g/L, respectively. The biosurfactant was characterized as anionic, while nuclear magnetic resonance, thin-layer chromatography and gas chromatography analyses revealed its lipopeptide nature. Toxicity tests showed survival rates of the fish Poecilia vivipara and the bivalve Anomalocardia brasiliana higher than 90% and 55%, respectively, thus suggesting the use of this biosurfactant in marine environment depollution. Moreover, the biosurfactant stimulated the growth of autochthonous microorganisms independently of the presence of motor oil in bioassays performed in seawater. These results demonstrate that the biosurfactant is biocompatible and has potential for industrial-scale production and application to bioremediation of oil spills-polluted marine environment.

The effect of heavy metal pollution on the microbiome of cyanobacteria in Cochin estuary (CE) on the southwest coast of India is reported in the study. Statistically significant difference in heavy metal concentration was observed between water, suspended particulate matter (SPM) and sediment. The Zn, Cd, Cu, Ni and Cr were 2–6 times higher in the SPM compared with the sediment, while Pb was 10 to 25 times higher. Although nearly 60% of the species diversity of microbiome was common between cyanobacteria enriched from the upstream (S1S) and downstream (S11B), there was a difference in the major groups of heterotrophic bacterial associates. Proteobacteria was the dominant phylum (>80%) in S1S, while it was second only (27.5%) after Planctomycetes (37.4%) in S11B. The results of the current study indicate that the pollution can influence an ecosystem at the micro-niche level.

The concentrations of the heavy metals Cu, Pb, Zn, As, Cr, Co, and Ni of a total of 187 surface sediment samples collected from the western Taiwan Strait were analyzed. The distribution characteristics and degree of contamination of these elements were investigated. The mean concentrations of Cu, Pb, Zn, As, Cr, Co, and Ni in the surface sediments of the study area were 10.2 mg/kg, 18.3 mg/kg, 51.7 mg/kg, 7.5 mg/kg, 38.7 mg/kg, 8.0 mg/kg, and 16.5 mg/kg, respectively. The heavy metals in the study area were mainly from natural sources. The regional pollution load index (PLIzone) was 0.64, indicating that there was no contamination, and an area with a relatively high PLIzone was found in the northern part of the study area. Furthermore, the impacts of the rapid development of Fujian's marine economy on the marine environment in the past decade should be further compared and analyzed.