Sensitive biomes, such as coastal ecosystems, have become increasingly susceptible to environmental impacts caused by oil logistics and storing, which, although more efficient nowadays, still cause spills. Thus, bioremediation techniques attract attention owing to their low impact on the environment. Among petroleum-based compounds, polycyclic aromatic hydrocarbons (PAHs) are known for their potential impact and persistence in the environment. Therefore, PAH bioremediation is notably a technique capable of reducing these polluting compounds in the environment. However, there is a lack of understanding of microbial growth process conditions, leading to a less efficient choice of bioremediation methods. This article provides a review of the bioremediation processes in mangroves contaminated with oils and PAHs and an overview of some physicochemical and biological factors. Special attention was given to the lack of approach regarding experiments that have been conducted in situ and that considered the predominance of the anaerobic condition of mangroves.

Artificial habitats, such as harbours and marinas, are entry doors for the introduction and dispersal of species. Surveys on fouling community in these habitats help to understand preventing environmental impacts and management of invasive species. Thus, a survey on fouling bryozoan fauna was carried out along 17 artificial habitats (eight harbours and nine marinas) from three coastal stretches in Southwestern Atlantic. A total of 55 species were identified, including 13 non-native, 33 cryptogenic and nine native taxa. Only five bryozoan species were found in more than 75% of sampled sites. Our analysis revealed that bryozoan fouling communities in artificial habitats do not vary significantly between commercial and recreational localities. However, we also found that faunal assemblages varied significantly along Brazilian coastal stretches that are distinguished by environmental conditions, such as salinity and temperature.

Measuring stream pollutant loads across the Great Barrier Reef (GBR) catchment area (GBRCA) is challenging due to the spatial extent, climate variability, changing land use and evolving land management practices, and cost. Thus, models are used to estimate baseline pollutant loads. The eWater Source modelling framework is coupled with agricultural paddock scale models and the GBR Dynamic SedNet plugin to simulate dissolved inorganic nitrogen (DIN) generation and transport processes across the GBRCA. Catchment scale monitoring of flow and loads are used to calibrate the models, and performance is assessed qualitatively and quantitatively. Modelling indicates almost half (47%) of the total modelled DIN load exported to the GBR lagoon is from the Wet Tropics, and almost half of the total modelled DIN load is from sugarcane areas. We demonstrate that using locally developed, customised models coupled with a complementary monitoring program can produce reliable estimates of pollutant loads.

The Port of Genoa (north-western Mediterranean Sea) receives sediments from two different catchment areas (Bisagno and Polcevera torrents). The aim of the work is to evaluate if Rare Earth Elements (REEs) could be used to identify the two sedimentary inputs and to unravel the origin of inorganic contaminants in an anthropised basin. REE results constitute a baseline for this port. The main REE-bearing minerals are phosphates and zircon. As, Cd, Hg, Pb, and Sn concentrate in the sediments closer to the Bisagno Torrent mouth, and the correlation with Ca and Light-REEs suggests their plausible geological origin. Co, Mn, and Ni maxima lie in the sediments closer to the Polcevera Torrent. Their correlation with Middle-REEs and Mg suggest that ophiolitic rocks could explain their presence. Cr, Cu, V, and Zn do not show a clear correlation with REEs, and their origin probably is a combination of natural and anthropogenic sources.

Marine protection is one of the main Sustainable Development Goals designed by the United Nations. Specifically, Goal 6.3 – Clean Water and Sanitation – defends that the spill of dangerous and pollutant substances must be eliminated. This principle is inherent in Maritime law since maritime salvage concerns not only vessels and cargo but also the marine environment. Since the Torrey Canyon accident in 1967, spilt crude has become the centre of attention of the International Maritime Organization (IMO). Nowadays, IMO has extended its scope of application to new threats, such as pollutant gas emissions. Its last approved strategy is IMO 2020, focused on the reduction of sulphur emissions by vessels. It came into force on the 1st of January 2020, becoming one effective measure to minimize the sulphur emissions to the atmosphere and to improve the environmental conditions, not only at the sea but also in the coastal and inland areas.

Marine litter on Spanish beaches is assessed through two monitoring programmes: the Official Monitoring Programme of Marine Litter on Beaches (BM-1) developed by the Spanish Ministry for the Ecological Transition and the Demographic Challenge and the Citizen Science Monitoring Programme (BM-7) that provides beach litter data from voluntary clean-up initiatives. So far, the data provided by both programmes have been analysed separately although their integration could improve the assessment of the situation of Spanish beaches regarding marine litter. To this end, this paper studies the possible integration of both datasets through the calculation of a baseline value for marine litter on Spanish beaches. Statistical analysis of data shows that both datasets produce similar values and also integrate in a consistent way to achieve a value of 128 items/100 m as a baseline value for beach litter in Spain.

In Small Island Developing States (SIDS), water pollution is not monitored or assessed frequently enough to fully understand the processes, impacts of water quality issues and what solutions are available This study investigated flushing time in Erakor lagoon and Port Vila Bay, Vanuatu using a numerical model developed in Delft3D. Microbial contamination by Escherichia coli was detected in multiple locations in the lagoon system with counts exceeding thresholds related to human health concerns. Modelling demonstrated a poor flushing time overall with a further decrease as the influence of waves and wind increased, especially in Vila Bay. Sea level rise resulted in an increase in flushing time downstream of the lagoon near the open sea, while with a decrease upstream and in Vila Bay. Based on these results, we recommend long-term continuous monitoring and identification of higher risks areas to prioritise decisions around wastewater management.

The increase of plastic production from the middle of the twentieth century was inevitably followed by an increase in the amount of plastic dumped in the natural environment. There, the plastic debris are exposed to sunlight, temperature, humidity, and physical stress. This can induce photo-oxidative and thermal degradation. This review discusses the mechanism of plastics UV weathering and its characteristics. Comparison of the photodegradation rate and physico-chemical properties are made according to the weathering mode (natural/accelerated) and medium (air/water). Since the photodegradation can lead to plastics fragmentation, this phenomenon is described along with the methodologies used in literature to evaluate the fragmentation. The impact of the photodegraded plastic debris on the marine environment is also presented in term of (i) photodegradation products and stabilizers leakage, (ii) organic pollutants accumulation, transfer, and leakage, and (iii) toxicity on marine organisms.

Cd is a non-degradable heavy metal pollutant with no known biological role. When taken up by living organisms from the environment, it causes extensive tissue damage. Here, we studied the effects of exposure to 20 mg/L⁻¹CdCl₂for 0, 24, 48, and 72 h on the renal tissue of marine catfish Arius arius. Cd uptake, metallothionein (MT) induction, microarchitectural alterations, DNA fragmentation, and caspase-3 activity were studied. Cd and MT levels were time-dependent and positively correlated. The diameter of the Bowman's capsule and tubules was significantly increased. Meanwhile, the density, diameter, and volume of the glomerulus as well as the density and volume of tubules decreased. Cd induced apoptosis though elevatedcaspase-3 activity. These results support the notion that exposure to sublethal Cd levels induces oxidative stress, leading to structural and functional impairment of the kidneys. Cd uptake and MT induction can serve as useful environmental biomarkers.