In recent years, the application of titanium dioxide (TiO₂) as a photocatalyst in asphalt pavement has received considerable attention for purifying ambient air from traffic-emitted pollutants via photocatalytic processes. In order to control the increasing deterioration of ambient air quality, urgent and proper risk assessment tools are deemed necessary. However, in practice, monitoring all process parameters for various operating conditions is difficult due to the complex and non-linear nature of air pollution-based problems. Therefore, the development of models to predict air pollutant concentrations is very useful because it can provide early warnings to the population and also reduce the number of measuring sites. This study used artificial neural network (ANN) and neuro-fuzzy (NF) models to predict NOₓconcentration in the air as a function of traffic count (Tᵣ) and climatic conditions including humidity (H), temperature (T), solar radiation (S), and wind speed (W) before and after the application of TiO₂on the pavement surface. These models are useful for modeling because of their ability to be trained using historical data and because of their capability for modeling highly non-linear relationships. To build these models, data were collected from a field study where an aqueous nano TiO₂solution was sprayed on a 0.2-mile of asphalt pavement in Baton Rouge, LA. Results of this study showed that the NF model provided a better fitting to NOₓmeasurements than the ANN model in the training, validation, and test steps. Results of a parametric study indicated that traffic level, relative humidity, and solar radiation had the most influence on photocatalytic efficiency.

The objective of this study was to evaluate the effect of frequent and periodic applications of sewage sludge to the soil, on corn productivity. The experiment was carried out as part of an experiment that has been underway since 1999, using two types of sludge. One came from the Barueri Sewage Treatment Station (BS, which receives both household and industrial sludge) and the other came from the Franca Sewage Treatment Station (FS, which receives only household sludge). The Barueri sludge was applied from 1999 up to the agricultural year of 2003/2004. With the exception of the agricultural years of 2004/2005 and 2005/2006, the Franca sludge was applied up to 2008/2009. All the applications were made in November, with the exception of the first one which was made in April 1999. After harvesting the corn, the soil remained fallow until the next cultivation. The experiment was set up as a completely randomized block design with three replications and the following treatments: control without chemical fertilization or sludge application, mineral fertilization, and dose 1 and dose 2 of sludge (Franca and Barueri). The sludges were applied individually. Dose 1 was calculated by considering the recommended N application for corn. Dose 2 was twice dose 1. It was evident from this work that the successive application of sludge to the soil in doses sufficient to reach the productivity desired with the use of nitrogen fertilizers could cause environmental problems due to N losses to the environment and that the residual and cumulative effects should be considered when calculating the application of sludge to soil.

The toxicity of soluble oil to the aquatic environment has started to attract wide attention in recent years. In the present work, we prepare graphene according to oxidation and thermal reduction methods for the removal of soluble oil from the solution. Characterization of the as-prepared graphene are performed by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman spectra, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy, and contact angle analysis. The adsorption behavior of soluble oil on graphene is examined, and the obtained adsorption data are modeled using conventional theoretical models. Adsorption experiments reveal that the adsorption rate of soluble oil on graphene is notably fast, especially for the soluble diesel oil, which could reach equilibrium within 30 min, and the kinetics of adsorption is perfectly consistent with a pseudo-second-order model. Furthermore, it is determined that the adsorption isotherm of soluble diesel oil with graphene fit the Freundlich model best, and graphene has a very strong adsorption capacity for soluble diesel oil in the solution. These results demonstrate that graphene is the material that provided both good adsorptive capacity and good kinetics, implying that it could be used as a promising sorbent for soluble oil removal from wastewater.

Lead (Pb) pollution is appearing as an alarming threat nowadays. Excessive Pb concentrations in agricultural soils result in minimizing the soil fertility and health which affects the plant growth and leads to decrease in crop production. Plant growth promoting rhizobacteria (PGPR) are beneficial bacteria which can protect the plants against many abiotic stresses, and enhance the growth. The study aimed to identify important rhizobacterial strains by using the 1-aminocyclopropane-1-carboxylate (ACC) enrichment technique and examine their inoculation effects in the growth promotion of maize, under Pb pollution. A pot experiment was conducted and six rhizobacterial isolates were used. Pb was added to 2 kg soil in each pot (with 4 seeds/pot) using Pb(NO₃)₂at the rate of 0, 100, 200, 300, and 400 mg kg⁻¹Pb with three replications in completely randomized design. Rhizobacterial isolates performed significantly better under all Pb levels, i.e., 100 to 400 Pb mg kg⁻¹soil, compared to control. Comparing the efficacy of the rhizobacterial isolates under different Pb levels, rhizobacterial isolates having both ACC-deaminase and nitrogen-fixing activities (AN8 and AN12) showed highest increase in terms of the physical, chemical and enzymatic growth parameters of maize, followed by the rhizobacterial isolates having ACC-deaminase activity only (ACC5 and ACC8), and then the nitrogen-fixing rhizobia (Azotobacter and RN5). However, the AN8 isolate showed maximum efficiency, and highest shoot and root length (14.2 and 6.1 cm), seedling fresh and dry weights (1.91 and 0.14 g), chlorophyll a, b, and carotenoids (24.1, 30.2 and 77.7 μg/l), protein (0.82 mg/g), proline (3.42 μmol/g), glutathione S-transferase, peroxidase and catalase (12.3, 4.2 and 7.2 units/mg protein), while the lowest Pb uptake in the shoot and root (0.83 and 0.48 mg/kg) were observed under this rhizobial isolate at the highest Pb level (i.e., 400 Pb mg kg⁻¹soil). The results revealed that PGPR significantly decreases the deleterious effects of Pb pollution and increases the maize growth under all Pb concentrations, i.e., 100–400 Pb mg kg⁻¹soil. PGPR chelate the Pb in the soil, and ultimately influence its bioavailability, release and uptake. The PGPR having both ACC-deaminase and nitrogen-fixing abilities are more effective and resistive against Pb pollution than PGPR having either ACC-deaminase or nitrogen-fixing activity alone. The ACC enrichment technique is an efficient approach to select promising PGPR.

This paper investigates the role of ballast water treatment systems (BWTSs) and proposes a selection procedure for conventional merchant ships based on the financial, legal, and operational circumstances. Through the metallurgical revolution of the nineteenth century, commercial ships are converted to steel hull from wooden structures. By this innovative shift, use of ballast water became an essential part of ships for improving propulsion and stability while reducing stress on hull (instead of rocks). However, the content of ballast water is emerged since it relocates marine species from an ecological composition (usually cargo discharging port) to another one (loading port). Uncontrolled relocation of marine species may cause severe damage to existing ecological basis on ballast discharging area. BWTSs are developed for ships to eliminate marine species (i.e., aquatic invasive species) content by using a filtering device. It ensures an eco-friendly ballasting and de-ballasting process. The selection of proper BWTS is another debate since the BWTSs are designed with cost-quality and cost (eco)-performance variations. The proposed approach denoted that both tonnage and the age of ship are indicative factors on selection. The cost of installation varies based on installation space and active vs. project vessel cases.

Because of the reduction in the use of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD), novel brominated flame retardants (NBFRs), including 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), decabromodiphenyl ethane (DBDPE), hexabromobenzene (HBB), and pentabromoethylbenzene (PBEB), started to be marketed as alternatives to the banned formulations. In this study, the spatial distribution and accumulation of NBFRs, PBDEs, and HBCD in the biota have been investigated in the littoral compartment of a large and deep subalpine lake (Lake Maggiore, Northern Italy), using zebra mussel Dreissena polymorpha and roach (Rutilus rutilus) as bioindicators. To our knowledge, this is the first study reporting the contamination of NBFRs in the freshwater invertebrate D. polymorpha. Contamination of zebra mussel due to PBEB, HBB, and BTBPE was low, ranging from 0.9 to 2.9 ng/g lipid weight, from 1.1 to 2.9 ng/g l.w., and from 3.5 to 9.5 ng/g l.w., respectively. PBEB and BTBPE in roach were always below the detection limit, while the contamination of HBB ranged from < limits of detection (LOD) to 1.74 ng/g l.w., indicating a weak contamination. DBDPE was < LOD in all the considered biological samples. Finally, HBCD was detected in all organic tissues with mean concentrations up to 74.4 ng/g l.w. PBDE results, supported by principal component analysis elaboration, suggested a possible contamination due to the congeners composing the penta- and deca-BDE technical formulations, which are present in the Lake Maggiore basin. The biomagnification factor values showed that tetra- and penta-BDE biomagnified, while octa-, nona-, and deca-BDE were still bioavailable and detectable in the fish muscles, but they do not biomagnified. Considering the other BFRs, only HBCD showed a moderate biomagnification potential.

Based upon 16S rDNA sequence homology, 15 phorate-degrading bacteria isolated from sugarcane field soils by selective enrichment were identified to be different species of Bacillus, Pseudomonas, Brevibacterium, and Staphylococcus. Relative phorate degradation in a mineral salt medium containing phorate (50 μg ml⁻¹) as sole carbon source established that all the bacterial species could actively degrade more than 97 % phorate during 21 days. Three of these species viz. Bacillus aerophilus strain IMBL 4.1, Brevibacterium frigoritolerans strain IMBL 2.1, and Pseudomonas fulva strain IMBL 5.1 were found to be most active phorate metabolizers, degrading more than 96 % phorate during 2 days and 100 % phorate during 13 days. Qualitative analysis of phorate residues by gas liquid chromatography revealed complete metabolization of phorate without detectable accumulation of any known phorate metabolites. Phorate degradation by these bacterial species did not follow the first-order kinetics except the P. fulva strain IMBL 5.1 with half-life period (t½) ranging between 0.40 and 5.47 days.

We present a multidisciplinary approach for characterization of a crude oil-contaminated site (Trecate, Italy), integrating geophysical data, such as subsoil electrical potential (in millivolts) and electrical resistivity (in ohm meters) distribution, with hydrogeological and bio-chemical data. Self-potential measurements have been evaluated together with active geoelectrical measurements and hydrological information, to provide spatial and temporal information about the self-potential sources and their possible correlations with the contamination state of the subsoil. Three self-potential surveys (March 2010, October 2010, and March 2011) were conducted at the site, both in the contaminated and uncontaminated regions. The obtained self-potential maps show large time-lapse differences in correspondence of the contaminated area, with positive electrical potential values (up to 50 mV) in spring surveys and an electrical potential dipolar distribution in October (2010) survey (amplitude from −15 to 25 mV). To understand the origin of the measured self-potential signals, a model using vertical dipolar electrical sources was built, taking into account the electrical resistivity distribution deduced from electrical resistivity tomography. The self-potential source identification allows the Trecate contamination state to be better delineated. In particular, two self-potential contributions are superimposed: the electrokinetic mechanism is predominant in spring, while the redox mechanism represents the most important contribution in autumn.

The emission, transport, deposition and eventual fate of mercury (Hg) in the Mediterranean area has been studied using a modified version of the Weather Research and Forecasting model coupled with Chemistry (WRF/Chem). This model version has been developed specifically with the aim to simulate the atmospheric processes determining atmospheric Hg emissions, concentrations and deposition online at high spatial resolution. For this purpose, the gas phase chemistry of Hg and a parametrised representation of atmospheric Hg aqueous chemistry have been added to the regional acid deposition model version 2 chemical mechanism in WRF/Chem. Anthropogenic mercury emissions from the Arctic Monitoring and Assessment Programme included in the emissions preprocessor, mercury evasion from the sea surface and Hg released from biomass burning have also been included. Dry and wet deposition processes for Hg have been implemented. The model has been tested for the whole of 2009 using measurements of total gaseous mercury from the European Monitoring and Evaluation Programme monitoring network. Speciated measurement data of atmospheric elemental Hg, gaseous oxidised Hg and Hg associated with particulate matter, from a Mediterranean oceanographic campaign (June 2009), has permitted the model’s ability to simulate the atmospheric redox chemistry of Hg to be assessed. The model results highlight the importance of both the boundary conditions employed and the accuracy of the mercury speciation in the emission database. The model has permitted the reevaluation of the deposition to, and the emission from, the Mediterranean Sea. In light of the well-known high concentrations of methylmercury in a number of Mediterranean fish species, this information is important in establishing the mass balance of Hg for the Mediterranean Sea. The model results support the idea that the Mediterranean Sea is a net source of Hg to the atmosphere and suggest that the net flux is ≈30 Mg year⁻¹of elemental Hg.

The thermo-tolerant and extreme acidophilic microorganism Bacillus pumilus was isolated from the soil collected from a commercial edible-oil extraction industry. Optimisation of conditions for the lipase production was conducted using response surface methodology. The optimum conditions for obtaining the maximum activity (1,100 U/mL) of extremely acidic thermostable lipase were fermentation time, 96 h; pH, 1; temperature, 50 °C; and concentration of palm oil, 50 g/L. After purification, a 7.1-fold purity of lipase with specific activity of 5,173 U/mg protein was obtained. The molecular weight of the thermo-tolerant acidophilic lipase (TAL) was 55 kDa. The predominant amino acid in the TAL was glycine. The functional groups of lipase were determined by Fourier transform infrared spectroscopy. TAL exhibited enhanced activity (114 %) with dimethyl sulphoxide (20 %, v/v), and it showed a moderate activity with methanol, hexane and benzene. The optimum conditions for the treatment of palm oil in wastewater using the TAL were found to be time, 3 h; pH, 1; temperature, 50 °C with pseudo second-order kinetic constant of 1.88 × 10⁻³ L mol⁻¹ min⁻¹. The Michaelis–Menten enzyme kinetic model and the nonlinear kinetic model were evaluated for the TAL. TAL established hydrolysis efficiency of 96 % for palm oil in wastewater at 50 °C.