The rate and mechanism of olivine dissolution was studied using naturally weathered dunite FO₉₈.₂₁(Mg₁.₈₈₄Fe₀.₃₉₁SiO₄) from an Indian source, that also contains serpentine mineral lizardite. A series of batch dissolution experiments were carried out to check the influence of temperature (30–75 ∘C), initial dunite concentration (0.5 and 20 g/L), and salinity (0–35 g/L NaCl) under fixed head space CO₂ pressure (P[Formula: see text] = 1 barg) on dunite dissolution. Dissolved Mg, Si, and Fe concentrations were determined by inductive coupled plasma atomic emission spectroscopy. End-product solids were characterized by scanning electron microscopy and X-ray diffraction. Initially, rates of dissolution of Si and Mg were observed to be in stoichiometric proportion. After 8 h, the dissolution rate was observed to decline. At the end of the experiment (504 h), an amorphous silica-rich layer was observed over the dunite surface. This results in decay of the dissolution rate. The operating conditions (i.e., salinity, temperature, and mineral loading) affect the dissolution kinetics in a very complex manner because of which the observed experimental trends do not exhibit a direct trend.

In this study, we have evaluated the efficacy of propidium monoazide quantitative polymerase chain reaction (PMA-qPCR) to differentiate between viable and non-viable Ancylostoma caninum ova. The newly developed method was validated using raw wastewater seeded with known numbers of A. caninum ova. Results of this study confirmed that PMA-qPCR has resulted in average of 88 % reduction (P < 0.05) in gene copy numbers for 50 % viable +50 % non-viable when compared with 100 % viable ova. A reduction of 100 % in gene copies was observed for 100 % non-viable ova when compared with 100 % viable ova. Similar reductions (79–80 %) in gene copies were observed for A. caninum ova-seeded raw wastewater samples (n = 18) collected from wastewater treatment plants (WWTPs) A and B. The newly developed PMA-qPCR method was applied to determine the viable ova of different helminths (A. caninum, A. duodenale, Necator americanus and Ascaris lumbricoides) in raw wastewater, human fecal and soil samples. None of the unseeded wastewater samples were positive for the above-mentioned helminths. N. americanus and A. lumbricoides ova were found in unseeded human fecal and soil samples. For the unseeded human fecal samples (1 g), an average gene copy concentration obtained from qPCR and PMA-qPCR was found to be similar (6.8 × 10⁵ ± 6.4 × 10⁵ and 6.3 × 10⁵ ± 4.7 × 10⁵) indicating the presence of viable N. americanus ova. Among the 24 unseeded soil samples tested, only one was positive for A. lumbricoides. The mean gene copy concentration in the positively identified soil sample was 1.0 × 10⁵ ± 1.5 × 10⁴ (determined by qPCR) compared to 4.9 × 10⁴ ± 3.7 × 10³ (determined by PMA-qPCR). The newly developed PMA-qPCR methods were able to detect viable helminth ova from wastewater and soil samples and could be adapted for health risk assessment.

Concentration activities of ²¹⁰Pb and ²¹⁰Po in the PM₁₀ were determined to discuss their distribution and chemical behavior in relation to meteorological parameters especially in air mass transport during monsoon events. Marine aerosol samples were collected between January 2009 and December 2010 at the coastal region of Mersing, which is located in the southern South China Sea and is about 160 km northeast of Johor Bahru, as part of the atmosphere–ocean interaction program in Malaysia. About 47 PM₁₀ samples were collected using the Sierra-Andersen model 1200 PM₁₀ sampler over a 2-year sampling campaign between January 2009 and December 2010. Samples were processed using acid digestion sequential extraction techniques to analyze various fractions such as Fe and Mn oxides, organic matter, and residual fractions. While, ²¹⁰Pb and ²¹⁰Po activities were measured with the Gross Alpha/Beta Counting System model XLB-5 Tennelec® Series 5 and the Alpha Spectrometry (model Alpha Analyst Spectroscopy system with a silicon-surface barrier detector), respectively. The distribution activities of ²¹⁰Pb and ²¹⁰Po in the PM₁₀ samples were varied from 162 to 881 μBq/m³ with mean value of 347 ± 170 μBq/m³ and from 85 to 1009 μBq/m³ with mean value of 318 ± 202 μBq/m³, respectively. The analysis showed that ²¹⁰Po activity in our samples lies in a border and higher range than global distribution values due to contributions from external sources injected to the atmosphere. The speciation of ²¹⁰Pb and ²¹⁰Po in marine aerosol corresponds to transboundary haze; e.g., biomass burning especially forest fires and long-range air mass transport of terrestrial dust has enriched concentrations of particle mass in the local atmosphere. The monsoon seems to play an important role in transporting terrestrial dust from Indo-China and northern Asia especially during the northeast monsoon, as well as biogenic pollutants originating from Sumatra and the southern ASEAN region during southwest monsoon events.

In order to evaluate the heavy metal pollution in the Tiber River and its environmental impact on the Tyrrhenian Sea (Central Mediterranean Sea), eight heavy metals (As, Hg, Cd, Cr, Cu, Ni, Pb and Zn) were determined in the water dissolved phase, suspended particulate matter and sediment samples collected from 21 sites in different seasons. Total heavy metal concentrations ranged from 34.88 to 4201.23 μg L⁻¹ in water (as the sum of the water dissolved phase and suspended particulate matter) and from 42.81 to 1686.84 mg kg⁻¹ in sediment samples. The total selected heavy metal load contribution into the sea is calculated in about 21,257.85 kg year⁻¹, showing that this River should account as one of the main contribution sources of heavy metals in the Mediterranean Sea. In relation to the ecological assessment, the Tiber River and Estuary would be considered as an area in which the ecological integrity is possibly at risk.

In this paper, the removal of three common dyes (orange I, orange II, and methylorange) and of the anticonvulsant drug carbamazepine from aqueous solutions by means of enzymatic and photocatalytic treatment was studied. Soybean peroxidase (SBP) was used as biocatalyst, both free in solution and immobilized on silica monoliths, and titanium dioxide as photocatalyst. The combination of the two catalysts led to a faster (about two to four times) removal of all the orange dyes compared to the single systems. All the dyes were completely removed within 2 h, also in the presence of immobilized SBP. As for carbamazepine, photocatalytic treatment prevails on the enzymatic degradation, but the synergistic effect of two catalysts led to a more efficient degradation; carbamazepine’s complete disappearance was achieved within 60 min with combined system, while up to 2 h is required with TiO₂ only.

TiO₂-pearlstone (PS) floatable photocatalysts were synthesized using a facile sol-gel method and confirmed by XRD, N₂ adsorption-desorption, SEM, EDX, TEM, FT-IR, XPS, and UV-vis DRS measurements. It has been found that the photocatalysts composed of anatase TiO₂ deposited on the surface of PS and formed mesoporous structure. By N or B/N doping, the band gap of the photocatalyst has been narrowed. The obtained floatable photocatalysts can be applied to solar light-driven remediation of oil-contaminated water. Diesel oil was chosen as the model pollutant to evaluate the photocatalytic activity. The results showed B/N-TiO₂-PS exhibited the highest photocatalytic activity for diesel oil under visible light irradiation, which is 48 % removal rate for 9 h. The reaction rate constant k of B/N-TiO₂-PS is 0.08423 h⁻¹, which is four times larger than that of pure TiO₂-PS. Moreover, the characteristic of floatable makes the photocatalysts easier to separate and reuse, which showed great potential for practical applications in the field of environmental cleanup and solar energy conversion.

River sediments are a major source of metal contamination in aquatic food webs. Due to the ability of metals to move up the food chain, fishes, occupying higher trophic levels, are considered to be good environmental indicators of metal pollution. The aim of this study was to analyze the metal content in tissues of the common barbel (Barbus barbus), a rheophilous cyprinid fish widely distributed in the Danube Basin, in order to find out if it can be used as a bioindicator of the metal content in the river sediment. We analyzed bioavailable concentrations of 15 elements (Al, As, B, Ba, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Se, Sr, and Zn) in sediments of the Danube (D), the Zapadna Morava (ZM), and the Južna Morava (JM) using the inductively coupled plasma spectroscopy (ICP-OES). The barbel specimens were collected in the proximity of sediment sampling sites for the analysis of metals in four tissues, gills, muscle, intestine, and liver. The sediment analysis indicated that the ZM is the most polluted with Cu, Ni, and Zn compared to other two rivers. The JM had the lowest concentrations of almost all observed elements, while the Danube sediments were mainly characterized by higher concentrations of Pb. The fish from the ZM had the highest concentration of Cu and Ni in the liver and intestine, and of Zn in the muscle tissue, which was in accordance with the concentrations of these metals in the sediment. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDS) was used for further analyses of metal interactions with fish tissues. The results suggest that the barbel can potentially be used as a bioindicator of sediment quality with respect to metal contamination.

In the present study, an indigenous biosorbent (leaves of Tecomella undulata) was used for the simultaneous removal of inorganic arsenic species (Asᴵᴵᴵ and Asⱽ) from the stored rainwater in Tharparkar, Pakistan. The Plackett–Burman experimental design was used as a multivariate strategy for the evaluation of the effects of six factors/variables on the biosorption of inorganic arsenic species, simultaneously. Central composite design (CCD) was used to found the optimum values of significant factors for the removal of Asᴵᴵᴵ and Asⱽ. Initial concentrations of both inorganic As species, pH, biosorbent dose, and contact time were selected as independent factors in CCD, while the adsorption capacity (q ₑ) was considered as a response function. The separation of inorganic As species in water samples before and after biosorption was carried out by cloud point and solid-phase extraction methods. Theoretical values of pH, concentration of analytes, biosorbent dose, and contact time were calculated by quadratic equation for 100 % biosorption of both inorganic As species in aqueous media. Experimental data were modeled by Langmuir and Freundlich isotherms. Thermodynamic and kinetic study indicated that the biosorption of Asᴵᴵᴵ and Asⱽ was followed by pseudo second order. It was concluded that the indigenous biosorbent material efficiently and simultaneously removed both As species in the range of 70.8 to 98.5 % of total contents in studied ground water samples. Graphical abstract Optimizing the significant varable by central 2³ + star orthogonal composite design

Pioneer native plant species from weathered oil spill-affected sites were selected to study their potential for phytoremediation on the basis of their ecological and phenological changes during the phytoremediation process. Experiments were conducted in field and in greenhouse. In field, native plants from aged oil spill-impacted sites with up 400 g of weathered petroleum hydrocarbons per kilogram soil were selected. In the impacted sites, the principal dominant plant species with potential for hydrocarbons removal were Cyperus laxus, Cyperus esculentus, and Ludwigia peploides. In greenhouse, the phenology of the selected plant species was drastically affected by the hydrocarbons level above 325 g total petroleum hydrocarbons (TPH) per kilogram soil after 2 years of phytoremediation of soils from the aged oil spill-impacted sites. From the phytoremediation treatments, a mix-culture of C. laxus, C. esculentus, and L. peploides in soil containing 325 g TPH/kg soil, from which 20.3 % were polyaromatic hydrocarbons (PAH) and 34.2 % were asphaltenes (ASF), was able to remove up 93 % of the TPH, while in unvegetated soil the TPH removal was 12.6 %. Furthermore, evaluation of the biodiversity and life forms of plant species in the impacted sites showed that phytoremediation with C. esculentus, alone or in a mix-culture with C. laxus and L. peploides, reduces the TPH to such extent that the native plant community was progressively reestablished by replacing the cultivated species resulting in the ecological recovery of the affected soil. These results demonstrate that native Cyperus species from weathered oil spill-affected sites, specifically C. esculentus and C. laxus, alone or in a mix-culture, have particular potential for phytoremediation of soils from tropical wetlands contaminated with weathered oil hydrocarbons.