To increase the phytoextraction efficiency of heavy metals and to reduce the potential negative effects of mobilized metals on the surrounding environment are the two major objectives in a chemically enhanced phytoextraction process. In the present study, a biodegradable chelating agent, NTA, was added in a hot solution at 90°C to soil in which beans (Phaseolus vulgaris L., white bean) were growing. The concentrations of Cu, Zn and Cd, and the total phytoextraction of metals by the shoots of the plant from a 1 mmol kg-¹ hot NTA application exceeded those in the shoots of plants treated with 5 mmol kg-¹ normal NTA and EDTA solutions (without heating treatment). A significant correlation was found between the concentrations of metals in the shoots of beans and the relative electrolyte leakage rate of root cells, indicating that the root damage resulting from the application of a hot solution might play an important role in the process of chelate-enhanced metal uptake in plants. The application of hot NTA solutions did not significantly increase metal solubilization in soil in comparison with a normal application of solution of the same dosage. Therefore, the application of a hot NTA solution may provide a more efficient alternative in chemical-enhanced phytoextraction, although further studies of techniques of application in fields are sill required.

Sediments from 18 different road runoff detention systems, located on the Swedish West Coast, were assessed for their ecological hazard potential. Thirteen of the sites were detention ponds, three were manholes within the same sedimentation construction, and two were detention basins handling wash water from road tunnels. Sediments from all sites were analysed for a range of physico-chemical parameters and contaminants, and screened for acute toxicity using Hyalella azteca (sediment), Daphnia magna (elutriate), and Ceriodaphnia dubia (elutriate) as the test organisms, and for chronic toxicity using C. dubia as the test organism. The benthic fauna of the thirteen detention ponds was also studied. Sediment quality guidelines probable effect levels were exceeded for one or several contaminants at half of the sites, and one third revealed toxicity in some of the bioassays. Most of the detention ponds were dominated by tolerant taxa indicating low biological quality. Relationships between contaminant concentrations, toxicity in bioassays, and benthic fauna were, however, found to be weak. Extractable organic Zn, which was used as a tire wear marker, correlated with Zn, Cu, presumably from brake linings, and W, a common component of tire studs. The highest concentration, which was found in the manholes (14 mg kg⁻¹ ds), corresponds to a tire wear concentration of 11 g kg⁻¹ ds. The results of the present study have shown that traffic related contaminants accumulate in the studied runoff treatment systems, and, therefore, the maintenance of them is crucial in order to prevent contamination of surrounding waters.

Numerous sites are contaminated with both heavy metals and polycyclic aromatic hydrocarbons (PAHs) and the technologies to treat such mixed contaminants are very limited. Electrokinetic remediation has the potential to remediate mixed contaminants in soils, including low permeability soils; however, the efficiency of this technology depends on the extracting solution employed. Previous studies on electrokinetic remediation have focused on the removal of heavy metals and organic compounds when they exist individually in clayey soils. In the present study, the feasibility of using cosolvents to enhance the electrokinetic removal of PAHs from clayey soils in the presence of heavy metals is investigated. A series of laboratory electrokinetic experiments was conducted using kaolin soil spiked with phenanthrene and nickel at concentrations of 500 mg/kg each to simulate typical field mixed contamination. Experiments were performed using n-butylamine (cosolvent) at concentrations of 10 and 20% and deionized water, each mixed with 0.01 M NaOH solution and circulated at the anode to maintain alkaline conditions. A periodic voltage gradient of 2 VDC/cm in cycles of 5 days on and 2 days off was applied in all the tests. During the initial stages when the soil pH was low, nickel existed as a cation and electromigrated towards the cathode. However, as the soil pH increased due to hydroxyl ions generated at the cathode and also flushing of high pH n-butylamine solution from the anode, nickel precipitated with no further migration. Phenanthrene was found migrating towards the cathode in proportion to the concentration of n-butylamine. The extent of phenanthrene removal was found to depend on both the electroosmotic flow and the concentration of n-butylamine, but the presence of nickel did not influence the transport and removal of phenanthrene.

The bioremediation of petroleum contaminated soil was investigated using a laboratory scale aerated reactor. The Indigenous bacteria, Stenotrophomonas multophilia, were isolated from the contaminated sites near to Jordan Petroleum Refinery and used further in the bioremediation experiments. First order kinetic equation has been proven to satisfactorily describe the biodegradation of petroleum contained in soil in the presence of the isolated bacteria. The results also showed that the first order kinetic constants for the different bioreactors vary between 0.041 and 0.0071/day. The overall kinetic constant k' was determined based on food-to-microorganisms ratio and found to be 0.02/day.

The development of a monitoring tool for predicting water quality and tracing pollution sources are important for the management of sustainable aquatic ecosystems in urban areas. In this study, synchronous fluorescence technique was applied to 18 sampling sites of a typical urban watershed in Korea, some of which are directly affected by the effluent from a wastewater treatment plant (WWTP), to investigate the capability of the technique for biochemical oxygen demand (BOD) prediction and source discrimination. Sampling was conducted three times at the same sites during the low flow period between October and November, 2005. Protein-like fluorescence intensities of the samples showed a positive linear relationship with the BOD values (Spearman’s rho = 0.90, p < 0.0001). The BOD prediction capability was superior to other monitoring tools such as UV absorption and conductivity measurements particularly for the upstream sites from the WWTP, which ranged from 0.0 to 5.0 mg/l as BOD. The protein-like fluorescence and a ratio of protein-like/fulvic-like fluorescence were suggested as good fluorescence signatures to discriminate different sources of dissolved organic matter (DOM). The samples collected from four different DOM source regions including upstream sites from the WWTP, downstream sites, discharge from a reservoir, and headwater were distinguished from one another by varying ranges of the two selected fluorescence signatures. Our results suggest that the synchronous fluorescence technique has the potential to be developed into a real-time water quality management tool for the comprehensive monitoring of urban rivers.

Two kinds of common turfgrass, fescue and ryegrass, were grown in soils amended with 20 x 80% sludge compost (SC) in this research. The effects of SC on two kinds of soil and response of fescue and ryegrass to the SC amendment were studied. The results showed that urease activity, extractable content of Cu and Zn and Electrical conductivity of both soils increased while pH decreased with the increase of SC amendment. However, the change of these parameters also depended strongly on soil characteristics. Sludge compost at the <=40 and <=60% levels can improve growth of fescue and ryegrass, respectively. The biomass of fescue grown in substrate with 40% SC increased 27% in a red soil and 44% in a yellow loamy soil compared to the control. The biomass of ryegrass grown in substrate with 60% SC increased 120% in the red soil and 86% in the yellow loamy soil. Sludge compost amendment at these levels did not significantly affect soluble salt contents of soil or Cu and Zn in plant tissue. Therefore, rational use of sludge compost can take advantage of its beneficial effect as a nutrient source for plant production while avoiding the potential deleterious effects on soil and plant.

Total Suspended particulate matter (TSP) in urban atmosphere of Islamabad was collected using a high volume sampling technique for a period of one year. The nitric acid-perchloric acid extraction method was used and the metal contents were estimated by atomic absorption spectrophotometer. The highest mean concentration was found for Ca at 4.531 μg/m³, followed by Na (3.905 μg/m³), Fe (2.464 μg/m³), Zn (2.311 μg/m³), K (2.086 μg/m³), Mg (0.962 μg/m³), Cu (0.306 μg/m³), Sb (0.157 μg/m³), Pb (0.144 μg/m³) and Sr (0.101 μg/m³). On an average basis, the decreasing metal concentration trend was: Ca > Na > Fe > Zn > K > Mg > Cu > Sb > Pb > Sr > Mn > Co > Ni > Cr > Li > Cd [almost equal to] Ag. The TSP levels varied from a minimum of 41.8 to a maximum of 977 μg/m³, with a mean value of 164 μg/m³, which was found to be higher than WHO primary and secondary standards. The correlation study revealed very strong correlations (r > 0.71) between Fe-Mn, Sb-Co, Na-K, Mn-Mg, Pb-Cd and Sb-Sr. Among the meteorological parameters, temperature, wind speed and pan evaporation were found to be positively correlated with TSP, Ca, Fe, K, Mg, Mn and Ag, whereas, they exhibited negative relationships with relative humidity. On the other hand, Pb, Sb, Zn, Co, Cd and Li revealed significant positive correlations with relative humidity and negative with temperature, wind speed and pan evaporation. The major sources of airborne trace metals identified with the help of principle component analysis and cluster analysis were industrial emissions, automobile exhaust, biomass burning, oil combustion, fugitive emissions, resuspended soil dust and earth crust. The TSP and selected metals were also studied for seasonal variations, which showed that Na, K, Zn, Cu, Pb, Sb, Sr, Co and Cd peaked during the winter and remained lowest during the summer, while Ca, Fe, Mg and Mn were recorded highest during the spring.

A field survey on the concentration of chemical species in particulate matter and gaseous compounds at two monitoring sites with different site classifications (urban and rural) was conducted over three years. Total (particulate matter + gaseous compounds) concentrations at the rural site were significantly lower than those at the urban site for all species (sulfur [graphic removed] and SO₂(g)), nitrate [graphic removed] and HNO₃(g)), ammonium [graphic removed] and ammonia (NH₃(g)), and chloride (Cl⁻ (p) and HCl (g))), which is thought to reflect classification of the site. The difference in the sulfur concentration at the urban and rural sites was characterized by the difference in SO₂ (g) concentration. Further, a clear seasonality was observed for the nitrate species. The HNO₃ (g) concentration was high in the summer compared with other seasons at both the urban and rural sites. The [graphic removed] concentration levels were approximately the same as those of NH₃ (g) at both sites. The molar ratios of the particulate matter concentration to the total concentration showed different characteristics; the nitrate, ammonium and ammonia, and chloride species showed a clear seasonal variation: low in summer and high in winter and the values were similar regardless of the site. On the other hand, the sulfur species showed constant values at both the urban and rural sites, however the concentrations were significantly different for the two sites. Ammonium accounted for the largest proportion of cations in the particulate matter, regardless of the site classification. In contrast, [graphic removed] accounted for the largest proportion of anions at the rural site, whereas [graphic removed] was comparable to [graphic removed] at the urban site. Ammonia accounted for the largest proportion of all chemical species at both sites. Seasonal analysis of the proportional distribution in particulate matter and gaseous compounds provides information on atmospheric conditions.

Eight soils from the Gulf of Kalloni in Lesvos Island, Greece, most of which were of low clay and low organic matter content, were used in a series of leaching experiments. The aim was to investigate the role of sewage sludge on Zn leaching and determine the soil properties that affect it. It was found that sludge addition at a low application rate (10 t ha⁻¹) decreased Zn leaching significantly by 30%. From a regression analysis it was found that eluted Zn was reduced with increasing Fe oxides content, probably due to Zn adsorption onto them, and that Zn transport increased with clay content. This indicates that Zn leaching was facilitated by the downward movement of clay particles, which was also suggested by the erratic Zn breakthrough observed in many soils. This was further confirmed by the fact that colloid concentrations increased with clay content in the soils (R = 0.85, P < 0.05). The results show that the addition of sewage sludge to low organic matter and clay content soils at moderate application rates enhances soil organic carbon and increases metal retention capacity.

The authors have successfully developed novel efficient and cost-effective sorbent and oxidant for removing mercury from power plant flue gases. These sorbent and oxidant offer great promise for controlling mercury emissions from coal-fired power plants burning a wide range of coals including bituminous, sub-bituminous, and lignite coals. A preliminary analysis from the bench-scale test results shows that this new sorbent will be thermally more stable and cost-effective in comparison with any promoted mercury sorbents currently available in the marketplace. In addition to the sorbent, an excellent elemental mercury (Hg(0)) oxidant has also been developed, and will enable coal-fired power plants equipped with wet scrubbers to simultaneously control their mercury emissions as well as their sulfur oxides emissions. This will work by converting all elemental mercury to an oxidized form which will be removed by the wet scrubber. This will result in significant cost savings for mercury emissions control to the atmosphere, and will help in keeping electric costs low. The sorbent and oxidant will benefit from the utilization of a waste stream from the printed circuit board (PCB) industry, and would thus be environmentally beneficial to both of the utility and electronics industries. The sorbent also demonstrated thermal stability up to 350°C, suggesting a possibility of an application in pulverized coal-fired power plants equipped with hot-side electrostatic precipitators and coal gasification plants.