Particles from channelled emissions of a battery recycling facility were size-segregated and investigated to correlate their speciation and morphology with their transfer towards lettuce. Microculture experiments carried out with various calcareous soils spiked with micronic and sub-micronic particles (1650 ± 20 mg Pb kg-1) highlighted a greater transfer in soils mixed with the finest particles. According to XRD and Raman spectroscopy results, the two fractions presented differences in the amount of minor lead compounds like carbonates, but their speciation was quite similar, in decreasing order of abundance: PbS, PbSO4, PbSO4·PbO, α-PbO and Pb0. Morphology investigations revealed that PM2.5 (i.e. Particulate Matter 2.5 composed of particles suspended in air with aerodynamic diameters of 2.5 μm or less) contained many Pb nanoballs and nanocrystals which could influence lead availability. The soil-plant transfer of lead was mainly influenced by size and was very well estimated by 0.01 M CaCl2 extraction. The soil-lettuce lead transfer from atmospheric industrial sub-micronic and micronic particles depends on particle size.

Concentrations of polycyclic aromatic hydrocarbons (PAHs) were measured in soil and XAD-based passive air samples taken from a total of 22 sites along three transects (Revelstoke, Yoho, and Observation, 6–8 sites for each transect) in the mountains of Western Canada in 2003–2004. Median concentrations in air (4-ring PAHs: 33 pg/m3) were very low and comparable to those in global background regions such as the Arctic. Low median soil concentrations (16 EPA PAHs: 16 ng/g dry weight) and compositional profiles dominated by naphthalene and phenanthrene are similar to those of tropical soils, indicative of remote regions influenced mostly by PAHs from traffic and small settlements. Comparing levels and composition of PAHs in soils between and along transects indeed suggests a clear relationship with proximity to local sources. Sampling sites that are closer to major traffic arteries and local settlements have higher soil concentrations and a higher relative abundance of heavier PAHs than truly remote sites at higher elevations. This remains the case when the variability in soil organic carbon content between sites is taken into account. Both air/soil concentration ratios and fugacity fractions suggest atmospheric net deposition of four-ring PAHs to soils. Soil and air monitoring of PAHs along three transects in the mountains of Western Canada reveals the influence of local emissions.

Two types of integrative sampling approaches (passive samplers and biomonitors) were tested for their sampling characteristics of selected endocrine disrupting compounds (EDCs). Chemical analyses (LC/MS/ MS) were used to determine the amounts of five EDCs (nonylphenol, bisphenol A, estrone, 17b-estradiol and 17a-ethinylestradiol) in polar organic chemical integrative samplers (POCIS) and freshwater mussels (Unio pictorum); both had been deployed in the influent and effluent of a municipal wastewater treatment plant (WWTP) in Genoa, Italy. Estrogenicity of the POCIS samples was assessed using the yeast estrogen screen (YES). Estradiol equivalent values derived from the bioassay showed a positive correlation with estradiol equivalents calculated from chemical analyses data. As expected, the amount of estrogens and EEQ values in the effluent were lower than those in the influent. Passive sampling proved to be the preferred method for assessing the presence of these compounds since employing mussels had several disadvantages both in sampling efficiency and sample analyses.

Although ecotoxicological data on heavy metals are abundant, information on other potentially toxic elements with attributed deficiency and/or toxic disturbances is scarce. Here we quantify zinc, copper, iron, manganese, chromium, molybdenum, strontium, barium, and boron in bones of greater white-toothed shrews, Crocidura russula, inhabiting two protected Mediterranean coastal sites: the Ebro Delta, a wetland impacted by human activities, and the Medas Islands, a reference site. Natural and anthropogenic inputs significantly increase Fe, Mn, Mo, Sr, Ba, and B in specimens from the Ebro Delta, whereas Cu and Cr were higher in Medas' shrews. Principal component analysis allowed complete separation between sites along the first two axes in particular due to B, Sr, and Cu. This study provides metal reference values in bones of insectivores, explores their variability and bioaccumulation patterns in depth, and assesses the potential environmental risk and toxicity for biota exposed to the above elements. Sr, Ba, Fe, Mn, Mo and B were bioaccumulated in bones of shrews from the Ebro Delta area and Cu in Medas Islands, whereas Cr and Zn showed similar levels at both sites.

There are strong drivers to increasingly adopt bioremediation as an effective technique for risk reduction of hydrocarbon impacted soils. Researchers often rely solely on chemical data to assess bioremediation efficiently, without making use of the numerous biological techniques for assessing microbial performance. Where used, laboratory experiments must be effectively extrapolated to the field scale. The aim of this research was to test laboratory derived data and move to the field scale. In this research, the remediation of over thirty hydrocarbon sites was studied in the laboratory using a range of analytical techniques. At elevated concentrations, the rate of degradation was best described by respiration and the total hydrocarbon concentration in soil. The number of bacterial degraders and heterotrophs as well as quantification of the bioavailable fraction allowed an estimation of how bioremediation would progress. The response of microbial biosensors proved a useful predictor of bioremediation in the absence of other microbial data. Field-scale trials on average took three times as long to reach the same endpoint as the laboratory trial. It is essential that practitioners justify the nature and frequency of sampling when managing remediation projects and estimations can be made using laboratory derived data. The value of bioremediation will be realised when those that practice the technology can offer transparent lines of evidence to explain their decisions. Detailed biological, chemical and physical characterisation reduces uncertainty in predicting bioremediation.

The physico-chemical absorption characteristics of ammonium-N for 10 soils from 5 profiles in York, UK, show its high potential mobility in N deposition-impacted, unfertilized, permanent grassland soils. Substantial proportions of ammonium-N inputs were retained in the solution phase, indicating that ammonium translocation plays an important role in the N cycling in, and losses from, such soils. This conclusion was further supported by measuring the ammonium-N leaching from intact plant/soil microcosms. The ammonium-N absorption characteristics apparently varied with soil pH, depth and soil texture. It was concluded for the most acid soils especially that ammonium-N leached from litter horizons could be seriously limiting the capacity of underlying soils to retain ammonium. Contrary to common opinion, more attention therefore needs to be paid to ammonium leaching and its potential role in biogeochemical N cycling in semi-natural soil systems subject to atmospheric pollution. mmonium mobility is more important than previously thought in N-impacted, unfertilized grasslands.

The application of geochemical signals in mosses is more and more popular to investigate the deposition of atmospheric pollutants, but it is unclear whether records of atmospheric sulfur in mosses differ between their diverse habitats. This study aimed to investigate the influence of growing condition on tissue sulfur and δ³⁴S of Haplocladium microphyllum. Epilithic and terricolous mosses in open fields, mosses under different canopy conditions were considered. We found that tissue sulfur and δ³⁴S of mosses under different habitats were not consistent and could not be compared for atmospheric sulfur research with each other even collected at the same site, moss sulfur and δ³⁴S records would be distorted by subsoil and upper canopies in different degrees, which possibly mislead the interpretation of atmospheric sulfur level and sources. Consequently, mosses on open rocks can be used reliably to assess atmospheric-derived sulfur in view of their identical sulfur and δ³⁴S evidences. Mosses on open rocky surfaces are reliable bioindicators of atmospheric sulfur deposition.

Ozone levels along urban-to-rural gradients in three Italian cities (Milan, Florence, Bari) showed that average AOT40 values at rural and suburban sites were 2.6 times higher than those determined at urban sites. However, O3 also exceeded the European criteria to protect forest health at urban sites, even when the standards for human health protection were met. For protecting street trees in Mediterranean cities, the objectives of measurement at urban sites should extend from the protection of human health to the protection of vegetation as well. A review of forest effects on O3 pollution and of O3 pollution on forest conditions in Italian cities showed that it was not possible to distinguish the effect of O3 in the complex mixture of urban pollutants and stressors. A preliminary list of tree species for urban planning in the Mediterranean area shows the average tree capacity of O3 removal and VOC emission. European criteria to protect human health from ozone may not protect urban forests in the Mediterranean area.

Biodegradation of chlorobenzenes was assessed at an anoxic aquifer by combining hydrogeochemistry and stable isotope analyses. In situ microcosm analysis evidenced microbial assimilation of chlorobenzene (MCB) derived carbon and laboratory investigations asserted mineralization of MCB at low rates. Sequential dehalogenation of chlorinated benzenes may affect the isotope signature of single chlorobenzene species due to simultaneous depletion and enrichment of 13C, which complicates the evaluation of degradation. Therefore, the compound-specific isotope analysis was interpreted based on an isotope balance. The enrichment of the cumulative isotope composition of all chlorobenzenes indicated in situ biodegradation. Additionally, the relationship between hydrogeochemistry and degradation activity was investigated by principal component analysis underlining variable hydrogeochemical conditions associated with degradation activity at the plume scale. Although the complexity of the field site did not allow straightforward assessment of natural attenuation processes, the application of an integrative approach appeared relevant to characterize the in situ biodegradation potential. Lines of evidence for in situ biodegradation of chlorinated benzenes in an anoxic aquifer by combining hydrogeochemical and stable isotope data with multivariate statistics.

Zerovalent iron powder (ZVI or Fe⁰) and nanoparticulate ZVI (nZVI or nFe⁰) are proposed as cost-effective materials for the removal of aqueous antibiotics. Results showed complete removal of Amoxicillin (AMX) and Ampicillin (AMP) upon contact with Fe⁰ and nFe⁰. Antibiotics removal was attributed to three different mechanisms: (i) a rapid rupture of the β-lactam ring (reduction), (ii) an adsorption of AMX and AMP onto iron corrosion products and (iii) sequestration of AMX and AMP in the matrix of precipitating iron hydroxides (co-precipitation with iron corrosion products). Kinetic studies demonstrated that AMP and AMX (20 mg L⁻¹) undergo first-order decay with half-lives of about 60.3 ± 3.1 and 43.5 ± 2.1 min respectively after contact with ZVI under oxic conditions. In contrast, reactions under anoxic conditions demonstrated better degradation with t1/2 of about 11.5 ± 0.6 and 11.2 ± 0.6 min for AMP and AMX respectively. NaCl additions accelerated Fe⁰ consumption, shortening the service life of Fe⁰ treatment systems. 21Fe⁰ is efficient for the aqueous removal of the β-lactam antibiotics and chlorides enhanced the removal rate by sustaining the process of iron corrosion.