Widespread phthalate exposure has been recently documented and is hypothesized to increase blood pressure (BP) in humans. However, current studies have provided inconclusive evidence for an association between phthalate exposure and BP. Human epidemiologic studies on the topic remain lacking. Therefore, this study aims to examine the association between serum phthalate concentrations and BP in a Chinese population. We measured several parameters of BP (systolic BP, diastolic BP, total cholesterol, and triglyceride) and the concentrations of 16 phthalates (dimethyl phthalate (DMP), diethyl phthalate, diisobutyl phthalate, dibutyl phthalate (DBP), bis (2-methoxyethyl) phthalate, bis (4-methyl-2-pentyl) phthalate, bis (2-ethoxyethyl) phthalate, diamyl phthalate, dihexyl phthalate, benzyl butyl phthalate, bis (2-nbutoxyethyl) phthalate (DBEP), dicyclohexyl phthalate, bis (2-ethyl hexyl) phthalate (DEHP), diisononyl phthalate, diphenyl phthalate, and di-n-octyl phthalate) in the serum of 474 adults recruited from a primary health care clinic. The relationship between serum phthalate concentrations and BP parameters was assessed with multivariate linear regressions. DBP was the most ubiquitous and dominant contaminant in the study population. The systolic BP of subjects in the median-exposure DEHP group significantly increased by 2.96 mmHg (p < 0.05) relative to that of subjects in the low-exposure group. Significant positive dose-related associations of DMP and DBEP with the levels of total cholesterol in serum (p for trend < 0.05) were also found. These associations persisted even when considering exposure to multiple phthalates. Our results suggested that phthalate exposure might increase BP in adults. However, our findings warrant further studies in a larger and more general population.

The field of nanotechnology had enormous developments, resulting in new methods for the controlled synthesis of a wide variety of nanoscale materials with unique properties. Efficient methods such as thermal decomposition for efficient size control have been developed in recent years for the synthesis of oleic acid (OA)-coated magnetite (Fe₃O₄) nanoparticles (MNP-OA). These nanostructures can be a source of pollution when emitted in the aquatic environment and could be accumulated by vulnerable marine species such as crustaceans. In this work, we synthesized and characterized MNP-OA of three different diameters (5, 8, and 12 nm) by thermal decomposition. These nanoparticles were remarkably stable after treatment with high affinity iron chelators (calcein, fluorescent desferrioxamine, and fluorescent apotransferrin); however, they displayed pro-oxidant activity after being challenged with ascorbate under two physiological buffers. Free or nanoparticle iron displayed low toxicity to four types of hepatopancreatic cells (E, R, F, and B) of the mangrove crab Ucides cordatus; however, they were promptly bioavailable, posing the risk of ecosystem disruption due to the release of excess nutrients.

The focus of this work is to investigate the emission characteristics of a stationary diesel engine while utilizing an emulsion fuel from a novel preparation process. The emulsion preparation was performed in real time without using any surfactant. Instead of mechanically breaking the water down into droplets, the water is delivered thermally, by changing its phase from gas to liquid. Steam is used in this proposed process, where it will be converted into suspended water droplets once it meets colder diesel. The product is called steam-generated water-in-diesel emulsion fuel (S/D). The method is expected to reduce the moving components of a previous surfactant-less system; therefore, reducing costs and increasing the system reliability. The emission characteristics of S/D were compared with EURO 2 diesel (D2), and a conventional emulsion denoted as E10. E10 was prepared using 10% water (volumetric) and SPAN80 as a surfactant. The emission characterizations were carried out based on the exhaust gas of a single cylinder naturally aspirated CI engine fueled with D2, S/D, and E10. Compared to D2, both emulsions significantly reduced the emissions of nitrogen oxides (NOx) (E10 max ↓58.0%, S/D max ↓40.0%) and particulate matter (PM) (E10 max ↓20.0%, S/D max ↓57.0%).

Development of antibiotic resistance in environmental bacteria is a direct threat to public health. Therefore, it becomes necessary to understand the fate and transport of antibiotic and its resistant bacteria. This paper presents a mathematical model for spatial and temporal transport of fluoroquinolone and its resistant bacteria in the aquatic environment of the river. The model includes state variables for organic matter, fluoroquinolone, heavy metals, and susceptible and resistant bacteria in the water column and sediment bed. Resistant gene is the factor which makes bacteria resistant to a particular antibiotic and is majorly carried on plasmids. Plasmid-mediated resistance genes are transferable between different bacterial species through conjugation (horizontal resistance transfer). This model includes plasmid dynamics between susceptible and resistant bacteria by considering the rate of horizontal resistance gene transfer among bacteria and the rate of losing resistance (segregation). The model describes processes which comprise of advection, dispersion, degradation, adsorption, diffusion, settling, resuspension, microbial growth, segregation, and transfer of resistance genes. The mathematical equations were solved by using numerical methods (implicit-explicit scheme) with appropriate boundary conditions. The development of the present model was motivated by the fact that the Musi River is heavily impacted by antibiotic pollution which led to the development of antibiotic resistance in its aquatic environment. The model was simulated for hypothetical pollution scenarios to predict the future conditions under various pollution management alternatives. The simulation results of the model for different cases show that the concentration of antibiotic, the concentration of organic matter, segregation rate, and horizontal transfer rate are the governing factors in the variation of population density of resistant bacteria. The treatment of effluents for antibiotics might be costly for the bulk drug manufacturing industries, but the guidelines can be made to reduce the organic matter which can limit the growth rate of microbes and reduce the total microbial population in the river. The reduction in antibiotic concentration can reduce the selection pressure on bacteria and can limit the population of resistant culture and its influence zone in the river stretch; however, complete removal of antibiotics may not result in complete elimination of antibiotic-resistant bacteria.

Bismuth vanadate (BiVO₄) powders were successfully synthesized in presence of EDTA via microwave irradiation and used as photocatalysts in the oxidation reaction of rhodamine B (rhB) under visible light. Different concentrations of EDTA (0.5 to 10%) to chelate Bi³⁺ ions were employed on the BiVO₄ synthesis. Under the presence of EDTA, a monoclinic crystalline structure was obtained, whereas a mixture of monoclinic and tetragonal phases was observed in the absence of EDTA. In addition, the use of different EDTA concentrations promoted the formation the different shapes of particles. The BiVO₄ sample synthesized with low concentration of EDTA (0.5%) exhibited about 85% of rhB decolorization in 300 min at pH 7.5. Therefore, this high efficiency can be attributed to a combination of intrinsic properties such as the morphology type and monoclinic structure of BiVO₄ particles.

The protocols commonly applied in surveys with lichens as biomonitors of airborne trace elements require analyses of samples derived from thalli or parts of thalli grown in the last year before sampling, under the postulation that samples of the same size are of the same age. Unfortunately, the influence of ecological site-specific factors on lichen growth is still largely ignored, so that samples of the same size collected in environmentally and climatically diverse sites might actually differ in age. This work aims at quantifying the influence of climatic conditions on the radial growth rates (RaGRs) of Xanthoria parietina, one of the most popular lichen biomonitors. RaGR was monitored in seven populations distributed along an altitudinal transect of 30 km in the Classical Karst (NE Italy), from 20 to 500 m above sea level. For c. 17 months, lobe growth was measured seasonally with a digital calliper, and site-specific climatic variables were monitored by means of thermo-hygrometric sensors and implemented by meteorological data. Finally, the lobe growth of X. parietina was modelled as a function of 18 environmental variables. Results revealed that thalli of relatively dry sites had significantly lower seasonal RaGR with respect to moister ones. Considering that cumulative precipitations were equally distributed along the transect, it was concluded that RaGR of X. parietina is affected negatively by high air temperatures and positively by high relative humidity. The importance of RaGR variation in lichen bioaccumulation studies is critically discussed.

Trichloroethylene (TCE) is a highly effective industrial degreasing agent and known carcinogen. It was frequently buried improperly in landfills and has subsequently become one of the most common groundwater and soil contaminants in the USA. A common strategy to remediate TCE-contaminated sites and to prevent movement of the TCE plumes into waterways is to construct biowalls which consist of biomaterials and amendments to enhance biodegradation. This approach was chosen to contain a TCE plume emanating from a closed landfill in Maryland. However, predicting the effectiveness of biowalls is often site specific. Therefore, we conducted an extensive series of batch reactor studies at 12 °C as opposed to the typical room temperature to examine biowall fill-material combinations including the effects of zero-valent iron (ZVI) and glycerol amendments. No detectable TCE was observed after several months in the laboratory study when using the unamended 4:3 mulch-to-compost combination. In the constructed biowall, this mixture reduced the upstream TCE concentration by approximately 90% and generated ethylene downstream, an indication of successful reductive dechlorination. However, the more toxic degradation product vinyl chloride (VC) was also detected downstream at levels approximately ten times greater than the maximum contaminant level. This indicates that incomplete degradation also occurred. In the laboratory, ZVI reduced VC formation. A hazard quotient was calculated for the landfill site with and without the biowall. The addition of the biowall decreased the hazard quotient by 88%.

The concentrations of the potentially toxic dissolved elements (PTEs) As, Hg, Cr, Pb, Cd, and Cu in the main rivers into Jiaozhou Bay (JZB) during 1981–2006 were measured, and the impact of the fluvial PTE fluxes on their distributions in the bay was investigated. The overall average concentration in the rivers into JZB ranged from 8.8 to 39.6 μg L⁻¹ for As, 10.1 to 632.6 ng L⁻¹ for Hg, 4.1 to 3003.6 μg L⁻¹ for Cr, 8.5 to 141.9 μg L⁻¹ for Pb, 1.1 to 34.2 μg L⁻¹ for Cd, and 13.2 to 1042.8 μg L⁻¹ for Cu. The interannual average concentration variations of the PTEs in these rivers were enormous, with maximum differences of 41–21,680 times, while their relative seasonal changes were far smaller with maximum differences of 3–12 times. The total annual fluvial fluxes for As, Hg, and Cr into JZB exhibited the inverse “U” pattern, while those for Pb and Cd showed the “N” pattern. As a whole, the total annual Cu flux presented a growing tendency from 1998 to 2006. In general, the changing trends of the PTE concentrations in JZB were similar to those of their annual fluxes from the rivers, indicating a great impact of their fluvial fluxes on their distributions in JZB. The annual concentration of Cd in the bay almost remained constant and differed from the fluvial flux of Cd. The diversified pattern of the environmental Kuznets curve (EKC) represented China’s approach to industrialization as “improving while developing.”

Carbon emissions in air passenger transport have become increasing serious with the rapidly development of aviation industry. Combined with a tripartite equilibrium strategy, this paper proposes a multi-level multi-objective model for an air passenger transport carbon tax setting problem (CTSP) among an international organization, an airline and passengers with the fuzzy uncertainty. The proposed model is simplified to an equivalent crisp model by a weighted sum procedure and a Karush-Kuhn-Tucker (KKT) transformation method. To solve the equivalent crisp model, a fuzzy logic controlled genetic algorithm with entropy-Bolitzmann selection (FLC-GA with EBS) is designed as an integrated solution method. Then, a numerical example is provided to demonstrate the practicality and efficiency of the optimization method. Results show that the cap tax mechanism is an important part of air passenger trans’port carbon emission mitigation and thus, it should be effectively applied to air passenger transport. These results also indicate that the proposed method can provide efficient ways of mitigating carbon emissions for air passenger transport, and therefore assist decision makers in formulating relevant strategies under multiple scenarios.

Palm oil mill wastes (palm kernel shell (PKS)) were used to prepare activated carbons, which were tested in the removal of colorants from water. The adsorbents were prepared by 1-h impregnation of PKS with ZnCl₂ as the activating agent (PKS:ZnCl₂ mass ratios of 1:1 and 2:1), followed by carbonization in autogenous atmosphere at 500 and 550 °C during 1 h. The characterization of the activated carbons included textural properties (porosity), surface chemistry (functional groups), and surface morphology. The dye removal performance of the different activated carbons was investigated by means of the uptake of methylene blue (MB) in solutions with various initial concentrations (25–400 mg/L of MB) at 30 °C, using a 0.05-g carbon/50-mL solution relationship. The sample prepared with 1:1 PKS:ZnCl₂ and carbonized at 550 °C showed the highest MB adsorption capacity (maximum uptake at the equilibrium, q ₘₐₓ = 225.3 mg MB / g adsorbent), resulting from its elevated specific surface area (BET, 1058 m²/g) and microporosity (micropore surface area, 721 m²/g). The kinetic experiments showed that removals over 90% of the equilibrium adsorptions were achieved after 4-h contact time in all the cases. The study showed that palm oil mill waste biomass could be used in the preparation of adsorbents efficient in the removal of colorants in wastewaters.