The removal of methylparaben (MP), a well-known endocrine disruptor, from aqueous solutions using polyacrylonitrile (PAN) beads has been studied under batch conditions, at room temperature and at different initial MP concentrations. The kinetic and equilibrium results have been analyzed. Kinetic modeling analysis has been carried out with three different types of adsorption models: pseudo-first-order, pseudo-second-order, and Elovich model. Kinetic data analysis indicated that the adsorption was a second-order process. The MP adsorption by PAN was also quantitatively evaluated by using the equilibrium adsorption isotherm models of Langmuir, Freundlich, Dubinin–Radushkevich (D–R), and Temkin and the applicability of the respective isotherm equations has been compared through the correlation coefficients. Adsorption data resulted well fitted by the Freundlich isotherm model. Data of MP adsorption have also been used to test different adsorption diffusion models. The diffusion rate equations inside particulate of Dumwald–Wagner and the intraparticle diffusion model have been used to calculate the diffusion rate. The actual rate-controlling step involved in the MB adsorption process was determined. The kinetic expression by Boyd gave the right indications. All together, our results indicate that PAN beads are a useful tool to remediate water bodies polluted by endocrine disruptors.

Integration of conventional wastewater treatments with advanced oxidation processes (AOPs) has become of great interest to remove pharmaceuticals and their metabolites from wastewater. However, application of these technologies generates reactive oxygen species (ROS) that may reach superficial waters through effluents from sewage treatment plants. The main objective of the present study was to elucidate if ROS present in real effluents after biological and then chemical (single ozonation, solar photolytic ozonation, solar photocatalytic ozonation (TiO₂, Fe₃O₄) and solar photocatalytic oxidation (TiO₂)) treatments induce oxidative stress in Daphnia magna. For this, the activity of two antioxidant enzymes (superoxide dismutase and catalase) and the level of lipid peroxidation were determined in Daphnia. The results of oxidative stress biomarkers studied suggest that D. magna is able to cope with the superoxide ion radical (O₂·⁻) present in the treated effluent due to single ozonation by mainly inducing the antioxidant activity superoxide dismutase, thus preventing lipid peroxidation. Lethal effects (measured in terms of immobility) were not observed in these organisms after exposure to any solution. Therefore, in order to probe the ecological efficiency of urban wastewater treatments, studies on lethal and sublethal effects in D. magna would be advisable.

In the present study, adult, healthy male Wistar rats (120 ± 10 g) were pre-treated by intragastric administration of cerium chloride (CeCl₃) 10 mg/kg (BW) each day during 60 days. Control animal were treated with omega 3, a polyunsaturated fatty acid (ω-3), by an intragastric administration at 10 mg/kg of BW for 60 days. Our results showed that CeCl₃-induced alterations in all tested oxidative stress markers. In fact, CeCl₃-induced the increase the level of both the creatinine concentration and the expression of lactate dehydrogenase, alkaline phosphatase, and transaminase activities in serum. On the other hand, CeCl₃ significantly increased the levels of lipid peroxidation in the renal and hepatic tissues. The capacity of CeCl₃ to generate reactive oxygen species (ROS) could explain his ability to induce morphological alterations, such as centrilobular hemorrhage, hepatic necrosis, and vacuolization of the cytoplasm in hepatic tissues, and the atrophy of the glomerulus and dilatation of urinary space in renal tissues. However, omega 3, after gastric administration, reduced significantly the toxic effect caused by CeCl₃ according to his high ability to scavenge ROS. The present study indicates that omega 3 is a significant compound with protective activity against intoxication with heavy metal, the cerium, and thus may be useful for chemoprevention.

Industrialized world is exposing living organisms to different chemicals and metals such as lithium (Li). Due to their use in common household items to industrial applications, it is imperative to examine their bioavailability. Lithium belongs to the group IA and also has wider uses such as in batteries, air conditioners to atomic reactors. Lithium occurs naturally in soil and water, mostly at low concentrations, and enters the food chain. It is not one of the essential minerals though various studies indicate that low levels of Li have beneficial effects on living organisms, whereas high levels expose them to toxicity and related detrimental effects. This review suggests that Li could be biologically important to living organism depending upon its concentration/exposure. Little is known about its biological importance and molecular understanding of its accumulation and mode of action, which might have future implications for Li’s long-term effects on living organisms.

The objective of this study was to assess the contamination level of potentially harmful elements (PHEs) in industrial soils and how this relates to environmental magnetism. Moreover, emphasis was given to the determination of the potential mobile fractions of typically “technogenic” metals. Therefore, magnetic and geochemical parameters were determined in topsoils (0–20 cm) collected around a chemical industry in Sindos Industrial Area, Thessaloniki, Greece. Soil samples were presented significantly enriched in “technogenic” metals such Cd, Pb, and Zn, while cases of severe soil contamination were observed in sampling sites north-west of the industrial unit. Contents of Cd, Cr, Cu, Ni, Pb, Mo, Sb, Sn, and Zn in soils and pollution load index (PLI) were highly correlated with mass specific magnetic susceptibility (χ ₗf). Similarly, enrichment factor (EF) and geoaccumulation index (I gₑₒ) for “technogenic” Pb and Zn exhibited high positive correlation factors with χ ₗf. Principal component analysis (PCA) classified PHEs along with the magnetic variable (χ ₗf) into a common group indicating anthropogenic influence. The water extractable concentrations were substantially low, while the descending order of UBM (Unified BARGE Method) extractable concentrations in the gastric phase was Zn > Pb > As > Cd, yet Cd showed the highest bioaccessibility (almost 95%).

Picloram (4-amino-3,5,6-trichloropicolinic acid) is a liquid auxinic herbicide used to control broad-leaved weeds. Picloram is representing a possible hazard to ecosystems and human health. Therefore, in this study, DNA methylation changes and DNA damage levels in Phaseolus vulgaris exposed to picloram, as well as whether humic acid (HA) has preventive effects on these changes were investigated. Random amplified polymorphic DNA (RAPD) techniques were used for identification of DNA damage and coupled restriction enzyme digestion-random amplification (CRED-RA) techniques were used to detect the changed pattern of DNA methylation. According to the obtained results, picloram (5, 10, 20, and 40 mg/l) caused DNA damage profile changes (RAPDs) increasing, DNA hypomethylation and genomic template stability (GTS) decreasing. On the other hand, different concentrations of applied HA (2, 4, 6, 8, and 10%) reduced hazardous effects of picloram. The results of the experiment have explicitly indicated that HAs could be an alternative for reducing genetic damage in plants. In addition to the alleviate effects of humic acid on genetic damage, its epigenetic effect is hypomethylation.

Hydrocarbons are the main components of diesel oil and are toxic for the majority of plants. A few plant species, known as phytoremediators, are tolerant of hydrocarbons and can survive the stressful conditions of soils contaminated with diesel oil. Canavalia ensiformis, a plant species that is well distributed throughout the tropics, possesses advantageous features for a potential resistance to soil contamination, such as fast growth and a deep root system. Thus, the aim of the present study was to evaluate the tolerance of C. ensiformis when it was exposed to soil contaminated with diesel oil. Seedlings were subjected to two treatments: contaminated soil (CS) (95 ml/kg of diesel oil) and non-contaminated soil (NCS) for a period of 30 days; its growth, morphology, anatomy, and physiology were analyzed. Despite the high level of toxicity, some individuals were able to survive in CS. These plants had root apical meristems with high levels of mitosis and were able to issue new roots with more developed aerenchyma tissue. Because the surviving plants presented no marks of cellular damage on the organs formed (root and leaves) during the experiment, the species capacity of growth on CS was confirmed. Although, long-term field experiments, applying different contaminant concentrations, should be considered to infer about the species resistance and use as phytoremediator.

Sample inhomogeneity is a severe issue in printed circuit boards especially when we are comparing the bioleaching efficiency. To avoid the ambiguous results obtained due to inhomogeneity in PCBs, 12 similar cell phone chargers (of renowned company) having same make and batch number were collected from scrap market. PCBs obtained from them were used in present studies. Out of these 12, three PCBs were used separately for chemical analysis of PCBs with prior acid digestion in aqua regia. It was found that, 10.8, 68.0, and 710.9 mg/l of Zn, Pb, and Cu were present in it, respectively. Six PCBs were used for bioleaching experiment with two variations, pulverized and non-pulverized. Though the pulverized sample have shown better leaching than non-pulverized one, former has some disadvantages if overall recycling of e-waste (metallic and nonmetallic fraction) is to be addressed. At the end of leaching experiments, copper was recovered using a simple setup of electrodeposition and 92.85% recovery was attained. The acidophiles involved in bioleaching were identified by culture dependent and culture independent techniques such as DGGE and species specific primers in PCR.

Mercury (Hg) is a globally distributed pollutant trace metal that has been increasing in terrestrial environments due to rising anthropogenic emissions. Vegetation plays an important role in Hg sequestration in forested environments, but increasing tree removal for biofuels and wood products may affect this process. The long-term effect of clear-cutting on forest soil Hg remains uncertain, since most studies are limited to measuring changes for < 10 years following a single harvest event. The chronosequence approach, which substitutes space for time using forest stands of different ages since clear-cutting, allows for investigation of processes occurring over decades to centuries. Here, we utilized three clear-cut forest soil chronosequences across the northeastern USA to understand Hg accumulation and retention over several decades. Total Hg concentrations and pools were quantified for five soil depth increments along three chronosequences. Our results showed Hg concentrations and pools decreased in the initial 20 years following clear-cutting. Mineral soil Hg pools decreased 21–53% (7–14 mg m⁻²) between 1–5-year-old stands and 15–25-year-old stands but mineral soil Hg pools recovered in 55–140-year-old stands to similar values as measured in 1–5-year-old stands. Our study is one of the first to demonstrate a decrease and recovery in Hg pool size. These changes in Hg did not correspond with changes in bulk density, soil C, or pH. We utilized a simple two-box model to determine how different Hg fluxes affected organic and mineral soil horizon Hg pools. Our simple model suggests that changes in litterfall and volatilization rates could have caused the observed changes in organic horizon Hg pools. However, only increases in leaching could reproduce observed decreases to mineral soil Hg pools. Further studies are needed to determine the mechanism of Hg loss from forest soils following clear-cutting.

Endosulfan is an organochlorine pesticide widely used in Southwest China. In this paper, the adsorption and desorption characteristics of endosulfan in two typical agricultural soils (latosol and lateritic red soil) in this area were studied. The results showed that Langmuir isothermal equation could well describe the adsorption thermodynamic characteristics of endosulfan in latosol and lateritic red soil, and the maximum adsorption capacities of α-endosulfan were 0.186 and 0.209 mg/g, while those of β-endosulfan were 0.140 and 0.148 mg/g, respectively. Endosulfan adsorption in the two soils was an exothermic physicochemical process, but dominated by physical process. The adsorption kinetic characteristics of endosulfan in the two soils could be well described by second-order kinetic equation, and the initial rate constants were 0.228 and 0.325 mg/(g min) for α-endosulfan, while those were 0.119 and 0.125 mg/(g min) for β-endosulfan, respectively. The adsorbed endosulfan in the two soils was difficult to be desorbed into the liquid phase, and showed weak desorption hysteresis. These results implied that endosulfan could be firmly adsorbed by the two soils, and their adsorption and desorption abilities may be related to the contents of soil clay and organic matter.