Semiconductor photocatalysis is an effective method used to degrade organophosphorus compounds. Here, the potential of a commonly mixed oxide semiconductor, ZnO/CuO, has been examined to degrade methyl parathion. Sono-coprecipitation method was used to provide ZnO/CuO nanocomposites, and it was applied to photocatalytic and sono-photocatalytic degradation of methyl parathion under solar light irradiation. Powder x-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), the Brunauer-Emmett-Teller (BET) surface area, field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) were used to characterize the synthesized samples. The optimal experimental conditions such as ZnO/CuO photocatalyst 90:10 M ratios, the initial concentration of 20 mg/L parathion, 1 g/L photocatalyst loading, no compressed air sparging, pH of 8, and ultrasonic power (60 W and 80 kHz) were used to degrade the parathion effectively. The parathion was fully (100% removal) degraded after 60 min sono-photoirradiation in the optimal experimental conditions. A real water sample was used to examine the ability of the ZnO/CuO photocatalyst 90:10 to remove the parathion in the water-soluble ions. Graphical abstract

Assessing the current farm-level efforts of climate change adaptation is essential to distinguish their usefulness and implying policy level advance measures for future. The present study investigated cotton farmers’ climate change adaptation and its impact on increasing cotton productivity and net cotton income in Punjab province of Pakistan. A pretested and well-structured questionnaire was used for data collection of 480 cotton farmers from three major cotton-producing divisions of cotton-wheat zone of Punjab, Pakistan. Logistic regression analysis approach was used in this study to find out the factors of adaptation and propensity score matching method employed to identify connecting adaptation impact on cotton productivity and cotton income. Empirical estimates of this study indicated as owing to some external and internal constraint farmers were limited focused on adaptation while conscious about adverse effects of climate change. Usage of required and recommended types of fertilizer, variation in planting dates, and changing varieties of crop were main adaptation strategies implemented by cotton farmers. Cotton farmers’ adaptation decision was significantly influenced by some major factors as weather forecasting, market information, easy access to agricultural extension services, farming experience, and education of cotton farmer. Farm-level increase in cotton productivity and net cotton crop income was direct while overall increases in national output and improving rural area farmer well-being were indirect and significant outcomes of implementing climate change adaptation of cotton farmers. Cotton farmers were using various combinations of adaptation strategies and achieving more benefits regarding their crop productivity and net returns. Findings of the study suggest need for larger investment in farm-level extension services, farmers’ schooling, and develop climate change institutional setup for enhancing farmers’ adaptation capability to increasing cotton productivity, improving well-being of farming community, and securing agriculture from future climatic uncertainties. Future policies must deal with farm-level limitations of advanced adaptation measures like making available information and sustaining sponsoring soil conservation practices, launching climate smart varieties and advanced adaptation measures based on various agro-ecological zones.

In this study, we have investigated the removal efficiency of two organic pollutants: methylene blue (MB) and Reactive Blue 19 (RB19) dyes by using a brown marine alga abundantly available on the Moroccan coastlines called Bifurcaria bifurcata (Bif-Bcata). During the experiments that were conducted in batch mode, we have studied the effect of some parameters such as pH, Bif-Bcata mass, contact time, and initial dye concentration in order to optimize the most suitable biosorption conditions. The biosorption tests on Bif-Bcata showed that the equilibrium is reached after 15 min for both dyes MB and RB19. The optimal pH values are 5.6 and 1.0 for MB and RB19, respectively. Kinetic studies revealed that the biosorption of both dyes follows the pseudo-second-order model. The biosorption isotherms demonstrated that the Langmuir model is the most appropriate to describe the biosorption equilibrium for both dyes MB and RB19 with maximum biosorption capacities reaching 2744.5 mg/g for MB and 88.7 mg/g for RB19. According to these results, it is clear that Bif-Bcata can be considered a promising biomaterial to be used as an effective biosorbent for the elimination of cationic and anionic dyes from textile effluents.

This study investigated the effect of typical stabilizers on hydraulic properties, immobilization, and leachate characteristics based on the diffusive gradient thin-films technique (DGT) and a leaching experiment. Three types of stabilizers were classified based on various characteristics of soil field capacity (θf), and their immobilization effects were as follows: (i) θf increased and the immobilization of Cd was achieved with nanohydroxyapatite, increasing θf by 19.36% and decreasing the bioavailable Cd by 78.84%; (ii) the increasing θf conversely inhibited cadmium stabilization. Straw biochar averagely promoted θf by 17.39%, while the stabilization was suppressed; (iii) other stabilizers (zeolite, montmorillonite, and sepiolite) had no significant effect on θf and immobilization. It is suggested that stabilization depends on chemical mechanisms and is probably also affected by hydraulic mechanisms. The first types of stabilizers formed precipitates with poor solubility, and the strong affinity of heavy metals to soil particles can account for that the increasing θf had a negligible influence on the dissolution equilibrium of the heavy metals. Attapulgite also belongs to this type. The second and third types of stabilizers primarily adsorbed cadmium through ion exchange, resulting in the relatively easy heavy metal release. Increasing θf facilitated the desorption of heavy metals in the case of the second stabilizer type. However, the inconspicuous change in θf caused by the third stabilizer type had no impact on stabilization. Moreover, Cd leaching was positively correlated with bioavailable Cd and soil permeability. Heavy metal migration induced by colloids less than 90 nm in coarse biochar treatments deserves further research.

To seek new mosquito control agents while avoiding the environmental impacts and toxicity hazards of conventional pesticides, the essential oil of Dysphania ambrosioides was obtained by hydrodistillation and analysed using GC–FID and GC–MS. The compounds 1-methyl-4-(1-methylethyl)-2,3-dioxabicyclo[2.2.2]oct-5-ene (cis-ascaridole), 1-methyl-4-(1-methylethyl) benzene (р-cymene), and 1-isopropyl-4-methyl-1,3-cyclohexadiene (p-mentha-1,3-diene also known as α-terpinene) were identified as the major components. The EO and the major fractions showed remarkable mosquitocidal activity against third instar larvae and adults of Culex quinquefasciatus Say. The oil and fractions were assayed at 3.125, 6.25, 12.5, 25, and 50 μl/l. Mortality was time- and dose-dependent. At 24 h post-exposure at an assayed concentration of 50 μl/l, the larval and adult mortalities ranged between 80.11–100% and 91.22–100%, respectively. Strong larvicidal and adulticidal activities were recorded in the cases of the crude oil and cis-ascaridole. The LC₅₀ values after 24 h of treatment ranged between 6.2–20.1 μl/l and 5.1–13.9 μl/l against larvae and adults, respectively. The corrected percentage mortalities increased over time with the tested plant oil and the major fractions relative to the control. The time required to achieve 50% mortality (LT₅₀) decreased remarkably with all treatments. The tested EO and major fractions effectively inhibited larval acetylcholinesterase activity with IC₅₀ values ranging from 8.44 to 64.80 mM compared with 2.08 × 10⁻³ mM for the reference standard, methomy. The results indicate the potential of developing natural mosquitocides against C. quinquefasciatus based on the tested EO and its major fractions. Graphical abstract

Fluazinam is a widely used fungicide; most of the available information associated with its impact predominately on birds, invertebrates, mammals, and algae and scarce works studied its impact on crop plants. A two years-field experiments were conducted to study the response of pepper and eggplant to fluazinam at 0, 1, 2, and 3 times of the fluazinam-recommended dose (0, 0.5, 1, and 1.5 mL/L). The results revealed that fluazinam did not cause toxic effect on the tested plants except for temporary decline of shoot weights and lengths after 3 days of fluazinam application. However, fluazinam improved the physiological status of leaves via promoting metabolites, antioxidants, better membrane integrity, and adjustment of the redox status of fluazinam-sprayed plants. The ultrastructure changes of fluazinam-treated leaves associated with increment of chloroplasts’ starch granules, giant nucleus, and elevated number of mitochondria. After 35 days of treatments, plant length of fungicide-treated plants was found to be higher than control and flowering time showed significant earliness. Furthermore, the yield traits were increased significantly in response to fluazinam. Our findings suggested that fluazinam-treated plants could initiate an early defense mechanism to mitigate the permanent growth retardation. This study could serve as a matrix for further studies to seek elucidation of plants’ response to other doses of fluazinam. Graphical abstract .

BACKGROUND: Unlike developing countries, in Egypt, gasoline is dispensed at dedicated stations by gasoline filling workers. This leads to high levels of exposure to the aromatic compounds in gasoline [principally benzene, toluene, ethyl benzene, and xylene (BTEX)] with the consequences of adverse health effects including oxidative stress. OBJECTIVE(S): To assess oxidative stress and trace metal levels among Egyptian gas filling workers. METHODS: A cross-sectional study was conducted among 50 gasoline filling station workers (exposed group) and a matched group of 50 clerical workers (non-exposed group). Trace metal levels (Cu, Zn, Fe, and Mn) and the activities of the antioxidant enzymes superoxide dismutase (SOD) and glutathione peroxidase (GPx) were measured in sera of all enrolled participants using atomic absorption spectroscopy. BTEX levels were assessed in the environment of the studied gas filling stations using the MIRAN IR system. RESULTS: All the measured trace metal levels and antioxidant enzyme activities were significantly lower among the exposed workers than among the non-exposed workers. All trace metals decreased significantly in relation to SOD activity among the exposed workers, whereas only Zn and Cu decreased in relation to SOD and GPx activity among the non-exposed workers. The exposed workers did not comply with the use of the required personal protective equipment (PPE) to avoid the dangerous effects of BTEX exposure. Among BTEX components, benzene exceeded the allowable Egyptian TLV in the studied gasoline stations (110.4 mg/m3 versus 1.6 mg/m3, respectively). The hygienic effect (HE) of the BTEX pollutant mixture exceeded the allowed borderline HE in Egypt although it did not show a significant correlation with different oxidative stress biomarkers and trace metals. CONCLUSION: Exposure to BTEX at gasoline filling stations lowers the levels of antioxidant enzyme activities and trace metals due to the strong hygienic effect of BTEX. Individual protection using the proper PPE should therefore be enforced. Research assessing the need of providing refueling workers with supplements of necessary trace metals and antioxidants is warranted.

The water loss and soil erosion in the Pisha sandstone region in the middle reaches of the Yellow River are extremely severe, leading to extremely harmful effects on the ecological environment and safety of the lower reaches. In this paper, the effects of the slope angle (20, 30, and 40°), rainfall intensity (20, 50, and 80 mm/h), and vegetation coverage (10, 30, and 50%) on the erosion characteristics of the Pisha sandstone slopes are studied using indoor-simulated rainfall tests. The results show that the infiltration into the Pisha sandstone is only 10~15%. It is found that rainfall intensity has the most significant effect on runoff, which gradually increases with increasing rainfall intensity. Vegetation significantly affects runoff reduction when the rainfall intensity is low (approximately 20 mm/h), but this effect decreases with increasing rainfall intensity. Rainfall intensity has an extremely significant effect (P < 0.01) on the sediment yield, followed by vegetation coverage, and slope angle. When the vegetation coverage is approximately 50%, the reduction in sediment yield reaches approximately 70%. Additionally, the sediment reduction benefit is more significant than the runoff reduction benefit. The presence of the eroded gullies on slopes with vegetation is less compared to that on the bare slopes. Therefore, relatively high vegetation coverage (≥ 50%) is required for soil and water conservation in Pisha sandstone area. The findings will provide some reference for Pisha sandstone conservation.

MgO micro-rods supported on porous carbon were synthesized by an economical method and applied for the adsorption of three different heavy metals ions (As (III), Cd (II) and Pb (II)). Here, we used dextrose as the source of carbon during the synthesis. The synthesized material has been characterized by different techniques like XRD, TEM, FE-SEM, BET and FT-IR for the determination of various physical properties. Compared with MgO synthesized without dextrose, the carbon-supported MgO or C-MgO demonstrated consistent rod-shaped morphology, higher surface area and better absorptivity. The adsorption data were analysed using various isotherm models and the Freundlich isotherm model seemed to provide the best fit to the data. The adsorption kinetics data on the other hand was well explicated by the pseudo second-order kinetic model. The maximum adsorption capacity of C-MgO was 508.47 mg g⁻¹ for As (III), 566.01 mg g⁻¹ for Cd (II) and 476.19 mg g⁻¹ for Pb (II), respectively after 6 h of reaction. To check the real-life usability and efficiency of C-MgO, it was added to a groundwater sample which had 169.55 ppb of As (III) and within 20 min it was adsorbed with 99% efficiency. Reusability studies reveal that C-MgO could be used up to 6 times with more than 60% efficiency. This study shows that C-MgO has high adsorptive ability, is an economic and non-toxic material with versatile applications and can be used for groundwater remediation in real life.