Ontario is Canada’s provincial leader in wind energy, with over 4000 MW of installed capacity supplying approximately five percent of the province’s electricity demand. Wind energy is now one of the fastest-growing sources of renewable power in Canada and many other countries. However, its possible negative impact on population health, as a new source of environmental noise, has raised concerns for people living in proximity to wind turbines (WTs). The aims of this study were to assess the effect of individual differences and annoyance on the self-reported general health and health-related quality of life (QOL) of nearby residents, using a pre- and post-exposure design. Prospective cohort data were collected before and after WT operations, from the individuals (n = 43) in Ontario, Canada. General health and QOL metrics were measured using standard scales, such as SF12, life satisfaction scales developed by Diener (SWLS) and the Canadian Community Health Survey (CCHS-SWL). The mean values for the Mental Component Score of SF12 (p = 0.002), SWLS (p < 0.001), and CCHS-SWL (p = 0.044) significantly worsened after WT operation for those participants who had a negative attitude to WTs, who voiced concerns about property devaluation, and/or who reported being visually or noise annoyed.

A retrospective analysis was conducted on air samples that were collected in 2005 under the Global Atmospheric Passive Sampling (GAPS) Network around the time period when the Stockholm Convention on Persistent Organic Pollutants came into force. Results are presented for several new flame retardants, including hexabromocyclododecane (HBCD), which was recently listed under the Convention (2013). These results represent the first global-scale distributions in air for these compounds. The targeted compounds are shown to have unique global distributions in air, which highlights the challenges in understanding the sources and environmental fate of each chemical, and ultimately in their assessments as persistent organic pollutants. The study also demonstrates the feasibility of using the PUF disk passive air sampler to study these new flame retardants in air, many of which exist entirely in the particle-phase as demonstrated in this study using a KOA-based partitioning model.

Perennial plant communities in the proximity of metal smelters and refineries may receive substantial inputs of base metal particulate as well as sulphate from the co-emission of sulphur dioxide. The Ni refinery at Port Colborne (Canada) operated by Inco (now Vale Canada Ltd.) emitted Ni, Co and Cu, along with sulphur dioxide, between 1918 and 1984. The objectives were to determine if vascular plant community composition, including standing litter, in twenty-one woodlots on clay or organic soil, were related to soil Ni concentration which decreased in concentration with distance from the Ni refinery. The soil Ni concentration in the clay woodlots ranged from 16 to 4130 mg Ni/kg, and in the organic woodlots, ranged from 98 to 22,700 mg Ni/kg. The concentrations of Co and Cu in the soils were also elevated, and highly correlated with soil Ni concentration. In consequence, each series of woodlots constituted a ‘fixed ratio ray’ of metal mixture exposure. For each of the woodlots, there were 16 independent measurements of ‘woodlot status’ which were correlated with elevated soil Ni concentration. Of the 32 combinations, there were eight linear correlations with soil Ni concentration, considerably more than would be expected by chance alone at a p-value of 0.05. With the exception of mean crown rating for shrubs at the clay sites, the correlations were consistent with the hypothesis that increased soil metal concentrations would be correlated with decreased diversity, plant community health or fitness, and increased accumulation of litter. Only five of the eight linear correlations were from the organic woodlots, suggesting that the observations were not confounded with soil type nor range in soil metal concentrations.

Hydrophobic organic compounds (HOCs) tend to associate with suspended sediment (SPS) in aquatic environments; the composition and grain size of SPS will affect the bioavailability of SPS-associated HOCs. However, the bioavailability of HOCs sorbed on SPS with different compositions and grain sizes is not well understood. In this work, passive dosing devices were made to control the freely dissolved concentration of pyrene, a typical HOC, in the exposure systems. The effect of pyrene associated with amorphous organic carbon (AOC), black carbon (BC), and minerals of SPS with grain sizes of 0–50 μm and 50–100 μm on the immobilization and enzymatic activities of Daphnia magna was investigated to quantify the bioavailability of pyrene sorbed on SPS with different grain sizes and compositions. The results showed that the contribution of AOC-, BC-, and mineral-associated pyrene to the total bioavailability of SPS-associated pyrene was approximately 50%–60%, 10%–29%, and 20%–30%, respectively. The bioavailable fraction of pyrene sorbed on the three components of SPS was ordered as AOC (22.4%–67.3%) > minerals (20.1%–46.0%) > BC (9.11%–16.8%), and the bioavailable fraction sorbed on SPS of 50–100 μm grain size was higher than those of 0–50 μm grain size. This is because the SPS grain size will affect the ingestion of SPS and the SPS composition will affect the desorption of SPS-associated pyrene in Daphnia magna. According to the results obtained in this study, a model has been developed to calculate the bioavailability of HOCs to aquatic organisms in natural waters considering both SPS grain size and composition.

The hydro-dynamic conditions have been changed after the impoundment of Three Gorges Reservoir (TGR), which result in changes of phosphorus (P) distribution in sediments. To investigate the variation and storage of P in the surface sediments of the TGR, continuously and intermittently submerged sediment samples were collected from 14 sites in 2014, and P fractions were analyzed using a modified Hedley sequential extraction method. The results showed that the concentrations of total P (TP) (904 ± 105 mg/kg) in the sediments did not exhibit an apparent spatial trend. A decreasing trend of bioavailable P (Bio-P) concentration in the continuously submerged sediment (177 ± 29 mg/kg) was observed from Fuling to Zigui, while an opposite trend appeared in the intermittently submerged sediment (139 ± 49 mg/kg) from Jiangjin to Zigui. The water depth and sediment grain size had important implications for the variation of the Bio-P in the sediments along the TGR. After the full operation of the TGR, the concentration of TP in the intermittently submerged sediment from Fengjie to Zigui was significantly higher in 2014 compared with that in 2009. The continuously submerged sediment is a major P pool of the TGR with an annual Bio-P deposition flux of 2.14 × 104 t/a, of which 87% was retained in the reaches from Fuling to Zigui. Considering the slow release of P from the sediment (0.16–2.75 t/a), the sediment has been a P “sink” since the full operation of the TGR in 2010.

The Diffusive Gradients in Thin Films (DGT) technique using PIWBA resin (The Dow Chemical Company) was developed and validated for the measurement of uranium (U) concentration in natural and uranium mining influenced waters. The U uptake on the PIWBA resin gel was 97.3 ± 0.4% (batch method; Vsol = 5 mL; [U] = 20 μg L−1; 0.01 M NaNO3; pH = 7.0 ± 0.2). The optimal eluent was found to be HNO3conc/70 °C with an elution efficiency of 88.9 ± 1.4%. The laboratory DGT investigation demonstrated that the PIWBA resin gel exhibits a very good performance across a wide range of pH (3–9) and ionic strength (0.001–0.7 M NaNO3) at different time intervals. Neither effect of PO43− (up to 1.72 × 10−4 M), nor of HCO3− (up to 8.20 × 10−3 M) on the quantitative measurement of uranium by DGT-PIWBA method were observed. Only at very high Ca2+ (2.66 × 10−4 M), and SO42− (5.55 × 10−4 M) concentration, the U uptake on DGT-PIWBA was appreciably lessened. In-situ DGT field evaluation was carried out in the vicinity of three former uranium mining sites in France (Loire-Atlantique and Herault departments), which employ different water treatment technologies and have different natural geochemical characteristics. There was a similar or inferior U uptake on DGT-Chelex®-100 in comparison with the U accumulation on a DGT-PIWBA sampler. Most likely, the performance of Chelex®-100 was negatively affected by a highly complex matrix of mining waters. The high concentration and identity of co-accumulating analytes, typical for the mining environment, did not have a substantial impact on the quantitative uptake of labile U species on DGT- PIWBA.The use of the polyphenol impregnated anion exchange resin leads to a significant advancement in the application and development of the DGT technique for determination of U in the vicinity of the former uranium mining sites.

Discharge of antimicrobial residues and resistant bacteria in hospital effluents is supposed to have strong impacts on the spread of antibiotic resistant bacteria in the environment. This study aimed to characterize the effluents of the Gabriel Montpied teaching hospital, Clermont-Ferrand, France, by simultaneously measuring the concentration of ciprofloxacin and of biological indicators resistant to this molecule in biofilms formed in the hospital effluent and by comparing these data to ciprofloxacin consumption and resistant bacterial isolates of the hospital. Determination of the measured environmental concentration of ciprofloxacin by spot sampling and polar organic chemical integrative (POCIS) sampling over 2 weeks, and comparison with predicted environmental concentrations produced a hazard quotient >1, indicating a potential ecotoxicological risk. A negative impact was also observed with whole hospital effluent samples using the Tetrahymena pyriformis biological model.During the same period, biofilms were formed within the hospital effluent, and analysis of ciprofloxacin-resistant isolates indicated that Gamma-Proteobacteria were numerous, predominantly Aeromonadaceae (69.56%) and Enterobacteriaceae (22.61%). Among the 115 isolates collected, plasmid-mediated fluoroquinolone-resistant genes were detected, with mostly aac(6′)-lb-cr and qnrS. In addition, 60% of the isolates were resistant to up to six antibiotics, including molecules mostly used in the hospital (aminosides and third-generation cephalosporins).In parallel, 1247 bacteria isolated from hospitalized patients and resistant to at least one of the fluoroquinolones were collected. Only 5 of the 14 species identified in the effluent biofilm were also found in the clinical isolates, but PFGE typing of the Gram-negative isolates found in both compartments showed there was no clonality among the strains.Altogether, these data confirm the role of hospital loads as sources of pollution for wastewater and question the role of environmental biofilms communities as efficient shelters for hospital-released resistance genes.

Lead poisoning, through the ingestion of spent lead gunshot, is an established cause of morbidity and mortality in waterbirds globally, but the thresholds at which blood levels begin to affect the physiology of birds in the wild are less well known. Here we determine the prevalence of lead exposure in whooper swans and, for the first time, identify the level of blood lead associated with initial reductions in body condition. Blood lead elevated above background levels (i.e. >20 μg dL⁻¹) was found in 41.7% (125/300) of swans tested. Blood lead was significantly negatively associated with winter body condition when levels were ≥44 μg dL⁻¹ (27/260 = 10%). Our findings indicating that sub-lethal impacts of lead on body condition occur at the lower end of previously established clinical thresholds and that a relatively high proportion of individuals in this population may be affected, reaffirm the importance of reducing contamination of the environment with lead shot.

Air pollutants emitted from vehicles in street canyons may be reactive, undergoing mixing and chemical processing before escaping into the overlying atmosphere. The deterioration of air quality in street canyons occurs due to combined effects of proximate emission sources, dynamical processes (reduced dispersion) and chemical processes (evolution of reactive primary and formation of secondary pollutants). The coupling between dynamics and chemistry plays a major role in determining street canyon air quality, and numerical model approaches to represent this coupling are reviewed in this article. Dynamical processes can be represented by Computational Fluid Dynamics (CFD) techniques. The choice of CFD approach (mainly the Reynolds-Averaged Navier-Stokes (RANS) and Large-Eddy Simulation (LES) models) depends on the computational cost, the accuracy required and hence the application. Simplified parameterisations of the overall integrated effect of dynamics in street canyons provide capability to handle relatively complex chemistry in practical applications. Chemical processes are represented by a chemical mechanism, which describes mathematically the chemical removal and formation of primary and secondary species. Coupling between these aspects needs to accommodate transport, dispersion and chemical reactions for reactive pollutants, especially fast chemical reactions with time scales comparable to or shorter than those of typical turbulent eddies inside the street canyon. Different approaches to dynamical and chemical coupling have varying strengths, costs and levels of accuracy, which must be considered in their use for provision of reference information concerning urban canopy air pollution to stakeholders considering traffic and urban planning policies.

Urbanization of coastal areas in recent years has driven us to consider a new approach for visually delineating sites that are contaminated with fecal bacteria (FB) in the coastal waters of the Andaman Islands in India. Geo-spatial analysis demarcated harbor, settlement, and freshwater/discharge influenced zones as hot spots for FB, while the open sea was demarcated as a cold spot. The land use types, such as developed and agriculture, with more anthropogenic activities increasing the FB counts while open sea showed the least FB. Box whisker plot indicated an increasing FB trend in the coastal waters during monsoon. Furthermore, principal component analysis revealed 67.35%, 78.62% and 70.43% of total variance at Port Blair, Rangat and Aerial bays, respectively. Strong factor loading was observed for depth (0.95), transparency (0.93), dissolved oxygen (0.93) and fecal streptococci (0.85). Distance proximity analysis revealed that fecal contaminations diluted significantly (P < 0.05) at the distance of 2.1 km toward the deeper or open sea water. This study demonstrates the effectiveness of an integrated approach in identifying the sources of fecal contamination and thus helping in better monitoring and management of coastal waters.