This international scale study measured the prevalence of indoor microplastics (MPs) in deposited dust in 108 homes from 29 countries over a 1-month period. Dust borne MPs shape, colour, and length were determined using microscopy and the composition measured using μFTIR. Human health exposure and risk was assessed along with residential factors associated with MPs via a participant questionnaire. Samples were categorised according to each country's gross national income (GNI). Synthetic polymers dominated in low income (LI) (39%) and high income (HI) (46%) while natural fibres were the most prevalent in medium income (MI) (43%) countries. Composition and statistical analysis showed that the main sources of MPs and dust were predominantly from indoor sources. Across all GNI countries, greater vacuuming frequency was associated with lower MPs loading. High income country samples returned higher proportions of polyamides and polyester fibres, whereas in LI countries polyurethane was the most prominent MPs fibre. Exposure modelling showed infants (0–2 years) were exposed to the highest MPs dose through inhalation (4.5 × 10⁻⁵ ± 3 × 10⁻⁵) and ingestion (3.24 × 10⁻² ± 3.14 × 10⁻²) mg/kg-Bw/day. Health risk analysis of constituent monomers of polymers indicates cancer incidence was estimated at 4.1–8.7 per million persons across age groups. This study's analysis showed socio-economic factors and age were dominant variables in determining dose and associated health outcomes of MPs in household dust.

In general, the remediation performance of heavy metals can be further improved by metal-oxide modified biochar. This work used MgO-modified rice husk biochar (MgO-5%@RHB-450 and MgO-5%@RHB-600) with high surface activity for simultaneous remediation and removal of heavy metals in soil and wastewater. The adsorption of MgO-5%@RHB-450/MgO-5%@RHB-600 for Cd(II), Cu(II), Zn(II) and Cr(VI) followed the pseudo-second order, with the adsorption capacities reaching 91.13/104.68, 166.68/173.22, 80.12/104.38 and 38.88/47.02 mg g⁻¹, respectively. The addition of 1.0% MgO-5%@RHB-450 and MgO-5%@RHB-600 could effectively decrease the CaCl₂-extractable Cd concentration (CaCl₂–Cd) by 66.2% and 70.0%, respectively. Moreover, MgO-5%@RHB-450 and MgO-5%@RHB-600 facilitated the transformation of exchangeable fractions to carbonate-bound and residual fractions, and reduced the exchangeable fractions by 8.1% and 9.6%, respectively. The mechanisms for the removal of heavy metals from wastewater by MgO-5%@RHB-450 and MgO-5%@RHB-600 mainly included complexation, ion exchange and precipitation, and the immobilization mechanisms in soil may be precipitation, complexation and pore filling. In general, this study provides high-efficiency functional materials for the remediation of heavy metal pollution.

The widely detected pyrene (PYR) is prone to accumulate and pose risks to the soil ecosystem. In this study, an aerobic closed microcosm was constructed to assess the effects of PYR at the environmental concentration (12.09 mg kg⁻¹) on the structure, interactions, and metabolism of carbon sources of soil microbial communities. The results found that half-life of PYR was 37 d and its aerobic biodegradation was mainly implemented by both Gram-negative and Gram-positive bacteria as revealed by the quantitative results. High-throughput sequencing based on 16 S rRNA and ITS genes showed that PYR exposure interfered more significantly with the diversity and abundance of the bacterial community than that of the fungal community. For bacteria, rare species were sensitive to PYR, while Gemmatimonadota, Gaiellales, and Planococcaceae involved in organic pollutants detoxification and degradation were tolerant of PYR stress. Co-occurrence network analysis demonstrated that PYR enhanced the intraspecific cooperation within the bacterial community and altered the patterns of trophic interaction in the fungal community. Furthermore, the keystone taxa and their topological roles were altered, potentially inducing functionality changes. Function annotation suggested PYR inhibited the nitrogen fixation and ammonia oxidation processes but stimulated methylotrophy and methanol oxidation, especially on day 7. For the metabolism, microbial communities accelerated the metabolism of nitrogenous carbon sources (e.g. amine) to meet the physiological needs under PYR stress. This study clarifies the impacts of PYR on the structure, metabolism, and potential N and C cycling functions of soil microbial communities, deepening the knowledge of the environmental risks of PYR.

Widespread conversion of coastal wetlands into aquaculture ponds in coastal region often results in degradation of the wetland ecosystems, but its effects on sediment's potential to produce greenhouse gases remain unclear. Using field sampling, incubation experiments and molecular analysis, we studied the sediment CH₄ production potential and the relevant microbial communities in a brackish marsh and the nearby aquaculture ponds in the Min River Estuary in southeastern China. Sediment CH₄ production potential was higher in the summer and autumn months than in spring and winter months, and it was significantly correlated with sediment carbon content among all environmental variables. The mean sediment CH₄ production potential in the aquaculture ponds (20.1 ng g⁻¹ d⁻¹) was significantly lower than that in the marsh (45.2 ng g⁻¹ d⁻¹). While Methanobacterium dominated in both habitats (41–59%), the overall composition of sediment methanogenic archaea communities differed significantly between the two habitats (p < 0.05) and methanogenic archaea alpha diversity was lower in the aquaculture ponds (p < 0.01). Network analysis revealed that interactions between sediment methanogenic archaea were much weaker in the ponds than in the marsh. Overall, these findings suggest that conversion of marsh land to aquaculture ponds significantly altered the sediment methanogenic archaea community structure and diversity and lowered the sediment's capacity to produce CH₄.

Both cancer and diabetes mellitus are serious health issues, accounting more than 11 million deaths worldwide annually. Targeted use of plant-mediated nanoparticles (NPs) in treatment of ailments has outstanding results due to their salient properties. The current study was designed to investigate the safe production of silver nanoparticles (AgNPs) from Acacia nilotica. Different concentrations of AgNO₃ were tested to optimize the protocol for the synthesis of AgNPs from the bark extract. It was demonstrated that 0.1 M and 3 mM were found to be the optimum concentrations for the synthesis of AgNPs. Standard characterization techniques such as UV–vis spectrophotometry, SEM, SEM-EDX micrograph, spot analysis, elemental mapping and XRD were used for the conformation of biosynthesis of AgNPs. Absorption spectrum of plant-mediated AgNPs under UV–vis spectrophotometer showed a strong peak at 380 nm and 420 nm for AgNPs synthesized at 0.1 M and 3 mM concentration of salt. The SEM results showed that AgNPs were present in variable shapes within average particle size ranging from (20–50 nm). Anticancer, antidiabetic and antioxidant potential of green AgNPs was investigated and they showed promising results as compared to the positive and negative controls. Hence, AgNPs were found potent therapeutic agent against the human liver cancer cell lines (HepG2), strong inhibitor for α-glucosidase enzyme activity and scavenging agent against free radicals that cause oxidative stress. Further studies are however needed to confirm the molecular mechanism and biochemical reactions responsible for the anticancer and antidiabetic activities of the particles.

In the context of global spread of coronavirus disease 2019 (COVID-19) caused by a novel coronavirus (SARS-CoV-2), there is a controversial issue on whether the use of facemasks is promising to control or mitigate the COVID-19 transmission. This study modeled the SARS-CoV-2 transmission process and analyzed the ability of surgical mask and N95 in reducing the infection risk with Sobol's analysis. Two documented outbreaks of COVID-19 with no involvers wearing face masks were reviewed in a restaurant in Guangzhou (China) and a choir rehearsal in Mount Vernon (USA), suggesting that the proposed model can be well validated when airborne transmission is assumed to dominate the virus transmission indoors. Subsequently, the uncertainty analysis of the protection efficiency of N95 and surgical mask were conducted with Monte Carlo simulations, with three main findings: (1) the uncertainty in infection risk is primarily apportioned by respiratory activities, virus dynamics, environment factors and individual exposures; (2) wearing masks can effectively reduce the SARS-CoV-2 infection risk to an acceptable level (< 10⁻³) by at least two orders of magnitude; (3) faceseal leakage can reduce protection efficiency by approximately 4% when the infector is speaking or coughing, and by approximately 28% when the infector is sneezing. This work indicates the effectiveness of non-pharmaceutical interventions during the pandemic, and implies the importance of the synergistic studies of medicine, environment, social policies and strategies, etc., on reducing hazards and risks of the pandemic.

The global pollution of microplastics (MPs) has attracted widespread attention, and the atmosphere was an indispensable media for the global transmission of MPs. With the growing awareness of MPs, atmospheric microplastics (AMPs) have been proposed as a new topic in recent years. Compared with the extensive studies on MPs in Marine and terrestrial environments, the studies of AMPs remain limited. In this study, sampling and analysis methods, occurrence, source analysis and health risk of AMPs were summarized and discussed. According to the different sampling methods, AMPs can be divided into suspension microplastics (SAMPs) and deposition microplastics (DAMPs). Previous studies have shown that SAMPs and DAMPs differ in composition and abundance, with SAMPs generally having a higher fraction of fragments. The mechanism of the migration of AMPs between different media was not clear yet. We further collated global data on the composition characteristics of MPs in soil and fresh water, which showed that the fragment MPs in soil and fresh water was higher than that in the atmosphere. Polymers in soil and fresh water were mainly PP and PE, while AMPs in the atmosphere were mainly PET. The shape composition of the MPs in both atmospheric and freshwater systems suggests that there may be the same dominant factor. The transport of AMPs and source apportionment were the important issues of current research, but both of them were at the initial stage. Therefore, AMPs needs to be further studied, especially for the source and fate, which would be conducive to understand the global distribution of AMPs. Furthermore, a standardized manual on sampling and processing of AMPs was also necessary to facilitate the comparative analysis of data between different studies and the construction of global models.

The geochemistry of iron (Fe), manganese (Mn) and sulfur (S) and their effects on arsenic (As) mobility in the mudflats of small river estuaries remain unclear. Here, diffusive gradient in thin films (DGT) and high-resolution dialysis (HR-Peeper) techniques combined with a sequential extraction procedure (BCR) were employed to investigate As, Fe, Mn and S geochemistry in the mudflat of the Jiuxi River estuary, Southeast China. Grain size analysis indicated that fine-grained particles were likely to be deposited in the estuarine intertidal zone and coastal area. DGT and HR-Peeper results revealed that in the estuary and coastal area, the dissolved As in sediment in summer was controlled by Mn geochemistry, which includes not only the release of As through Mn/Fe reduction but also the stabilization of dissolved As in pore water. This stabilization of dissolved As may due to the formation of As–Mn-OM complexes. In winter, the significant positive correlations between DGT-Fe, DGT-Mn, DGT-As and DGT-S indicated that sulfate reduction was the start of As mobilization in sediment in winter. In both the estuary and the coastal area, the easily reducible Fe, Mn and As contents in intertidal sediment were higher than those in the subtidal zone. Combined with the As flux across the sediment-overlying water interface (SWI), these phenomena suggested that As in subtidal sediment diffused into overlying water and that As in overlying water tended to accumulate in the intertidal sediment. The total organic carbon content (TOC) and DGT results in the lower reach, estuary and coastal areas indicated that organic matter is the controlling factor of Fe/Mn reduction, sulfate reduction and As mobilization. The BCR test results showed higher reactive fraction contents of Fe, Mn and As in winter sediment, which threaten the overlying water quality.

Per- and polyfluoroalkyl substances (PFAS) have been produced and used in a broad range of products since the 1950s. This class, comprising of thousands of chemicals, have been used in many different products ranging from firefighting foam to personal care products and clothes. Even at relatively low levels of exposure, PFAS have been linked to various health effects in humans such as lower birth weight, increased serum cholesterol levels, and reduced antibody response to vaccination. Human biomonitoring data demonstrates ubiquitous exposure to PFAS across all age groups. This has been attributed to PFAS-contaminated water and dietary intake, as well as inadvertent ingestion of indoor dust for adults and toddlers. In utero exposure and breast milk have been indicated as important exposure pathways for foetuses and nursing infants. More recently, PFAS have been identified in a wide range of products, many of which come in contact with skin (e.g., cosmetics and fabrics). Despite this, few studies have evaluated dermal uptake as a possible route for human exposure and little is known about the dermal absorption potential of different PFAS. This article critically investigates the current state-of-knowledge on human exposure to PFAS, highlighting the lack of dermal exposure data. Additionally, the different approaches for dermal uptake assessment studies are discussed and the available literature on human dermal absorption of PFAS is critically reviewed and compared to other halogenated contaminants, e.g., brominated flame retardants and its implications for dermal exposure to PFAS. Finally, the urgent need for dermal permeation and uptake studies for a wide range of PFAS and their precursors is highlighted and recommendations for future research to advance the current understanding of human dermal exposure to PFAS are discussed.

Early pregnancy is crucial for fetal growth. Maternal thyroid hormone is critical for fetal growth and can be disturbed under exogenous exposure. However, it's uncertain whether exposure to PM₂.₅ and inorganic constituents during early pregnancy can affect TH and fetal growth. We focused on the associations of early-pregnancy PM₂.₅ and inorganic constituents with fetal growth and maternal THs. PM₂.₅ concentration was estimated using a satellite-based spatiotemporal model. Fetal biparietal diameter (BPD), head circumference (HC), femur length (FL), and humerus length (HL) were measured by ultrasonography at median 15.6, 22.2, and 33.1 gestational weeks. Levels of 28 PM₂.₅ constituents were measured in a sub-group of 329 pregnancies. Maternal serum free thyroxine (fT4), free triiodothyronine, and thyroid-stimulating hormone levels were measured at 14 weeks of gestation. Mixed-effect models and multiple linear regression were applied to evaluate the associations of PM₂.₅ and its constituents with fetal growth measures. Mediation analysis was used to examine the mediating role of the THs. Results showed that each 10 μg/m³ increase in PM₂.₅ was associated with 0.20 mm reductions in BPD (95%CI: 0.33, −0.01), 0.27 mm decreases in FL (95%CI: 0.40, −0.13), and 0.36 decreases in HL (95%CI: 0.49, −0.23). Per 10 μg/m³ increment in PM₂.₅ was correlated with 5.82% decreases in the fT4 level (95% CI: 8.61%, −2.96%). FT4 accounted for 14.3% of PM₂.₅ exposure-induced change in BPD at first follow-up. Al (β = −2.91, 95%CI: 5.17, −0.66), Si (β = −1.20, 95%CI: 2.22, −0.19), K (β = −3.09, 95%CI: 5.41, −0.77), Mn (β = −47.20, 95%CI: 83.68, −10.79) and Zn (β = −3.02, 95%CI: 5.55, −0.49) were associated with decreased fetal BPD, especially in first follow-up. Zn (β = −38.12%, 95% CI: 58.52%, −8.61%) was also associated with decreased fT4 levels. Overall, early pregnancy exposure to PM₂.₅ and its constituents was associated with fetal growth restriction and decreased maternal fT4 levels might mediate the effect of PM₂.₅.