Results from coastal water pollution monitoring (Lesvos Island, Greece) are presented. In total, 53 samples were analyzed for 58 polar organic micropollutants such as selected herbicides, biocides, corrosion inhibitors, stimulants, artificial sweeteners, and pharmaceuticals. Main focus is the application of a proposed wastewater indicator quartet (acesulfame, caffeine, valsartan, and valsartan acid) to detect point sources and contamination hot-spots with untreated and treated wastewater. The derived conclusions are compared with the state of knowledge regarding local land use and infrastructure. The artificial sweetener acesulfame and the stimulant caffeine were used as indicators for treated and untreated wastewater, respectively. In case of a contamination with untreated wastewater the concentration ratio of the antihypertensive valsartan and its transformation product valsartan acid was used to further refine the estimation of the residence time of the contamination. The median/maximum concentrations of acesulfame and caffeine were 5.3/178 ng L⁻¹ and 6.1/522 ng L⁻¹, respectively. Their detection frequency was 100%. Highest concentrations were detected within the urban area of the capital of the island (Mytilene). The indicator quartet in the gulfs of Gera and Kalloni (two semi-enclosed embayments on the island) demonstrated different concentration patterns. A comparatively higher proportion of untreated wastewater was detected in the gulf of Gera, which is in agreement with data on the wastewater infrastructure. The indicator quality of the micropollutants to detect wastewater was compared with electrical conductivity (EC) data. Due to their anthropogenic nature and low detection limits, the micropollutants are superior to EC regarding both sensitivity and selectivity. The concentrations of atrazine, diuron, and isoproturon did not exceed the annual average of their environmental quality standards (EQS) defined by the European Commission. At two sampling locations irgarol 1051 exceeded its annual average EQS value but not the maximum allowable concentration of 16 ng L⁻¹.

The Banana Bat, Neoromicia nana, exploits pollution-tolerant chironomids at wastewater treatment works (WWTWs). We investigated how pollutant exposure impacts the detoxification organs, namely the liver and kidney of N. nana. (i) We performed SEM-EDS to quantify metal content and mineral nutrients, and found significant differences in essential metal (Fe and Zn) content in the liver, and significant differences in Cu and one mineral nutrient (K) in the kidneys. (ii) We performed histological analysis and found more histopathological lesions in detoxification organs of WWTW bats. (iii) We calculated hepatosomatic/renalsomatic indices (HSI/RSI) to investigate whole organ effects, and found significant increases in organ size at WWTWs. (iv) We quantified metallothionein 1E (MT1E), using Western Blot immunodetection. Contrary to predictions, we found no significant upregulation of MT1E in bats at WWTWs. Ultimately, N. nana exploiting WWTWs may suffer chronic health problems from sub-lethal damage to organs responsible for detoxifying pollutants.

The impact of surface ozone pollution on winter wheat yield is empirically estimated by considering socio-economic and weather determinants. This research is the first to use an economic framework to estimate the ozone impact, and a unique county-level panel is employed to examine the impact of the increasing surface ozone concentration on the productivity of winter wheat in China. In general, the increment of surface ozone concentration during the ozone-sensitive period of winter wheat is determined to be harmful to its yield, and a conservative reduction of ozone pollution could significantly increase China's wheat supply.

Open burning of electronic waste (e-waste) releases various metals and organohalogen compounds in the environment. Here we investigated the interplay of metals (Cu, Pb, Zn, Fe, Co, and Sr) and bromine (Br) in the formation of dioxin-related compounds (DRCs), including polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs), as well as non-regulated DRCs such as polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) and their monobrominated PCDD/Fs in soils sampled from open burning e-waste sites at Agbogbloshie in Accra, Ghana. The predominant DRCs were PBDFs, PCDFs, PCDDs, and DL-PCBs. Statistical analyzes, X-ray absorption spectroscopy, and the PCDF/PCDD ratio suggested possible formation paths of PCDD/Fs and DL-PCBs by catalytic behaviors of copper chlorides (CuCl, CuCl2, and Cu2(OH)3Cl) and thermal breakdown of polyvinyl chloride. Predominant formation of brominated furans may be derived from electron transfer from intermediates of PBDE to copper, Cu(II) → Cu(I). Lead chloride also contributed to generate DRCs and may become highly bioaccessible through the open burning of e-waste. The main zinc species (ZnCl2 and ZnS) suggested a possible relationship to generate DRCs and specific zinc source such as tire burning. Cu, Pb, Zn, and Br contained in various e-wastes, wires/cables, plastics, and tires strongly influenced generation of many DRCs.

The organohalogenated contaminants (OCs) including 12 organochlorine pesticides (OCPs), 7 indicator polychlorinated biphenyls (PCBs) and 7 polybrominated diphenyl ethers (PBDEs) were determined in soils collected from Kenya, Eastern Africa. The total OCPs fell in the range of n.d–49.74 μg kg⁻¹ dry weight (dw), which was dominated by DDTs and endosulfan. Identification of pollution sources indicated new input of DDTs for malaria control in Kenya. The total PCBs ranged from n.d. to 55.49 μg kg⁻¹ dw, dominated by penta- and hexa-PCBs, probably associated with the leakage of obsolete transformer oil. The soils were less contaminated by PBDEs, ranging from 0.19 to 35.64 μg kg⁻¹ dw. The predominant PBDE congeners were penta-, tri- or tetra-BDEs, varying among different sampling sites. Risk assessment indicated potential human health risks posed by OCs in soils from Kenya, with PCBs as the most contributing pollutants. The local authorities are recommended to make best efforts on management of OC pollution, particularly from DDTs and PCBs to meet the requirement of Stockholm Convention.

Among soil organisms, nematodes are seen as the most promising candidates for bioindications of soil health. We hypothesized that the soil nematode community structure would differ in three land use areas (agricultural, forest and industrial soils), be modulated by soil parameters (N, P, K, pH, SOM, CaCO3, granulometric fraction, etc.), and strongly affected by high levels of heavy metals (Cd, Pb, Zn, Cr, Ni, Cu, and Hg) and emerging contaminants (pharmaceuticals and personal care products, PPCPs). Although these pollutants did not significantly affect the total number of free-living nematodes, diversity and structure community indices vastly altered. Our data showed that whereas nematodes with r-strategy were tolerant, genera with k-strategy were negatively affected by the selected pollutants. These effects diminished in soils with high levels of heavy metals given their adaptation to the historical pollution in this area, but not to emerging pollutants like PPCPs.

Under the German environmental specimen bank programme bream (Abramis brama) were sampled in six German rivers and analysed for the priority hazardous substances dicofol, hexabromocyclododecane (HBCDD), hexachlorobenzene (HCB), hexachlorobutadiene (HCBD), heptachlor + heptachlor epoxide (HC + HCE), polybrominated diphenylethers (PBDEs), polychlorinated dibenzo-p-dioxins and -furans and dioxin-like polychlorinated biphenyls (PCDD/Fs + dl-PCBs), and perfluorooctane sulfonic acid (PFOS). The aim was to assess compliance with the EU Water Framework Directive environmental quality standards for biota (EQSBiota) for the year 2013, and to analyse temporal trends for those substances that are of special concern. General compliance was observed for dicofol, HBCDD and HCBD whereas PBDEs exceeded the EQSBiota at all sites. For all other substances compliance in 2013 varied between locations. No assessment was possible for HC + HCE at some sites where the analytical sensitivity was not sufficient to cover the EQSBiota. Trend analysis showed decreasing linear trends for HCB and PFOS at most sampling sites between 1995 and 2014 indicating that the emission reduction measures are effective. Mostly decreasing trends or constant levels were also observed for PCDD/Fs and dl-PCBs. In contrast, increasing trends were detected for PBDEs and HBCDD which were especially pronounced at one Saar site located downstream of the industries and conurbation of Saarbrücken and Völklingen. This finding points to new sources of emissions which should be followed in the coming years.

Over the last decades, changes in dust storms characteristics have been observed in different parts of the world. The changing frequency of dust storms in the southeastern Mediterranean has led to growing concern regarding atmospheric PM10 levels. A classic time series additive model was used in order to describe and evaluate the changes in PM10 concentrations during dust storm days in different cities in Israel, which is located at the margins of the global dust belt. The analysis revealed variations in the number of dust events and PM10 concentrations during 2001–2015. A significant increase in PM10 concentrations was identified since 2009 in the arid city of Beer Sheva, southern Israel. Average PM10 concentrations during dust days before 2009 were 406, 312, and 364 μg m−3 (median 337, 269,302) for Beer Sheva, Rehovot (central Israel) and Modi'in (eastern Israel), respectively. After 2009 the average concentrations in these cities during dust storms were 536, 466, and 428 μg m−3 (median 382, 335, 338), respectively. Regression analysis revealed associations between PM10 variations and seasonality, wind speed, as well as relative humidity. The trends and periodicity are stronger in the southern part of Israel, where higher PM10 concentrations are found. Since 2009 dust events became more extreme with much higher daily and hourly levels. The findings demonstrate that in the arid area variations of dust storms can be quantified easier through PM10 levels over a relatively short time scale of several years.

Developed landscapes are exposed to changes in hydrology and water chemistry that limit their ability to mitigate detrimental impacts to coastal water bodies, particularly those that result from stormwater runoff. The elevated level of impervious cover increases not only runoff but also contaminant loading of nutrients, metals, and road salt used for deicing to water bodies. Here we investigate the impact that road salt has on denitrification in roadside environments. Sediments were collected from a series of forested and roadside wetlands and acclimated with a range of Cl− concentrations from 0 to 5000 mg L−1 for 96 h. Denitrification rates were measured by the isotope pairing technique using 15N–NO3−, while denitrifying community structures were compared using terminal restriction fragment length polymorphism (T-RFLP) of nitrous oxide reductase genes (nosZ). Chloride significantly (p < 0.05) inhibited denitrification in forested wetlands at a Cl− dosage of 2500 or 5000 mg L−1, but the decrease in denitrification rates was less and not significant for the roadside wetlands historically exposed to elevated concentrations of Cl−. The difference could not be attributed to other significant changes in conditions, such as DOC concentrations, N species concentrations, or pH levels. Denitrifying communities, as measured by T-RFs of the nosZ gene, in the roadside wetlands with elevated concentration of Cl− were distinctly different and more diverse compared to forested wetlands, and also different in roadside wetlands after 96 h exposures to Cl−. The shifts in denitrifying communities seem to minimize the decrease in denitrification rates in the wetlands previously exposed to Cl. As development results in more Cl− use and exposure to a broad range of natural or manmade wetland structures, an understanding of the seasonal effect of Cl on denitrification processes in these systems would aid in design or mitigation of the effects on N removal rates.

The influence of bacteria on the transport and deposition behaviors of carbon nanotubes (CNTs) in quartz sand was examined in both NaCl (5 and 25 mM ionic strength) and CaCl2 (0.3 and 1.2 mM ionic strength) solutions at unadjusted pH (5.6–5.8) by direct comparison of both breakthrough curves and retained profiles in both the presence and absence of bacteria. Two types of widely utilized CNTs, i.e., carboxyl- and hydroxyl-functionalized multi-walled carbon nanotubes (MWCNT-COOH and MWCNT-OH, respectively), were employed as model CNTs and Escherichia coli was utilized as the model bacterium. The results showed that, for both types of MWCNTs under all examined conditions, the breakthrough curves were higher in the presence of bacteria, while the retained profiles were lower, indicating that the co-presence of bacteria in suspension increased the transport and decreased the deposition of MWCNTs in porous media, regardless of ionic strength or ion valence. Complementary characterizations and extra column tests demonstrated that competition by bacteria for deposition sites on the quartz sand surfaces was a major (and possibly the sole) contributor to the enhanced MWCNTs transport in porous media.