Sedimentation basins and sediment traps are established methodologies for reducing sediment and other pollutants exiting small watersheds such as urban areas and construction sites. However, estimating the trap efficiency or designing a basin or trap to provide a pre-determined trap efficiency, is difficult, especially for dynamic conditions of water and sediment inflow. A conceptual dynamic model, called SedTrap, was developed that can be used to assess the varying removal efficiencies as a storm is routed through different sized basins or traps. The model uses the STELLA® modeling software from Iseesystems, Inc. to build a dynamic model to route both water and sediment through the system. Settling velocities are determined for a range of sediment sizes and temperatures using the Rubey-Watson law and compared to the more traditional Stokes' law. The variation of efficiencies with time and by sediment size as the basin fills with sediment is also addressed. The results for the example used show a decrease in trap efficiencies with decreasing particle size, which leads to an increase in percent fine material of total sediment load at the outlet of the basin. This “fining” of the material coupled with the higher surface area per mass of the fine particles has implications for changes in the upstream-downstream concentrations of adsorbed contaminants.

Klebsiella oxytoca Sc and Methylobacterium mesophilicum Sr were isolated from enrichment cultures using dimethyl isophthalate (DMI) as the sole carbon and energy source and mangrove sediment as an inoculum. Complete degradation of DMI required both species of bacteria at different biochemical transformation steps. The biochemical degradation pathway was DMI to monomethyl isophthalate (MMI) by K. oxytoca Sc, MMI to isophthalate (IPA) by M. mesophilium Sr, and IPA by both K. oxytoca Sc and M. mesophilium Sr sequentially. The consortium comprising of K. oxytoca Sc and M. mesophilicum Sr was effective in complete degradation of DMI in eight days. Our results suggest that a consortium of microorganisms indigenous to the mangrove environment is responsible for mineralization of environmental pollutant DMI through biochemical cooperation.

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 [composite function (small circle)]C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.

Chemical immobilisation of inorganic contaminants by increasing the sorption capacity of soils and/or promoting the formation of sparingly soluble precipitates may be a cost-effective approach to counteract groundwater pollution. This study focuses on the enhanced retention of arsenic in two contaminated soils by addition of solid iron(II)sulphate. Four lab-scale column experiments were performed under unsaturated conditions with subsoil material sampled at a former timber preservation site and a pigment production plant. Arsenic effluent concentrations indicated 89.9 to 99.8% immobilisation in the treated columns. Sequential extractions showed a shift in contaminant binding forms towards the iron(hydr)oxide and residual fractions. Possible immobilisation mechanisms are the precipitation of FeAs phases, the formation of inner sphere complexes, and/or the occlusion of arsenic in newly formed amorphous/crystalline iron oxides. Bromide breakthrough curves point to the fact that the addition of iron(II)sulphate only moderately affects soil hydraulic properties. In contrast to reduced emissions of arsenic, increased seepage water concentrations were observed for other trace elements (e.g., cobalt, nickel, zinc). Mass balances indicate that this effect is primarily related to the temporary pH-drop caused by the oxidation of ferrous iron. The results show that chemical immobilisation using iron(II)sulphate is a promising way to protect groundwater quality at sites contaminated with timber preservation and pigment production remnants. As a prerequisite, optimum amendment levels need to be established and practical/field tests should be accompanied by a monitoring for a broad range of relevant trace elements.

A major focus of palynological research has been to assess the various pathways by which pollen is delivered to sedimentary archives. In open lake systems, the contribution of streamborne pollen to lake sediments is thought to be highly significant. Despite this, little research has attempted to identify changes in the pollen record that might be attributed to changing sediment pathways rather than to changes in vegetation. This research aims to partially redress this gap by examining a dated pollen sequence from Kyre Pool, Worcestershire, England. The results presented in this paper suggest that some changes in sediment source, as determined by a fingerprinting approach, can influence the pollen record reconstructed from a lake sediment profile.

Preliminary leaching column and greenhouse plant uptake studies were conducted in two soils with contrasting characteristics amended with varying rates (0 to 148.3 Mg ha-1) of incinerated sewage sludge (ISS) and weathered sewage sludge (WISS) to estimate the leaching losses of trace elements from the soils amended with incinerated sewage sludge by products and to evaluate the uptake and accumulation of these elements in various parts of Sorghum vulgaris var. sudanense Hitche. (“Sorgrass''), a Sorghum-Sudan grass hybrid. Results of this study indicated that leaching of Cr, Cd, Zn, Cu, Ni, Fe and Mn from soils amended with ISS and WISS increased with increasing rates of amendment. Results of the leaching column study further revealed greater leaching losses from coarse-textured soil compared to medium-textured soil and also from ISS amended soils than with WISS amended soils. Results further suggested that the type of element and the interaction between the element and soil properties affected the leachability of various trace elements. The uptake study indicated uptake and accumulation of trace elements by plant parts increased with increasing rates of amendments. Greater plant uptake and accumulation of trace elements were observed in plant parts grown in soils amended with ISS compared to that of WISS. Results also indicated a greater accumulation of trace elements in below ground part of the plants (roots) compared to that was observed in above ground parts (shoots). Limited data obtained from this one season preliminary studies demonstrated that incinerated sewage sludge products from wastewater treatment plants could be used as soil amendments at low application (no more than 24.7 Mg ha-1) for optimum plant growth, and dry matter yield without resulting in substantial accumulation of metals in plant parts at concentrations above the recommended critical limits and without causing significant leaching losses of various trace elements. It is imperative that long-term field studies are necessary to evaluate the long-term impact of using these new products in leaching and accumulation of various trace elements in plants and soils.

One of the methods to diminish the internal phosphorus (P) loading is inactivation of P by aluminum (Al). After addition of Al to lake water an Al(OH)₃ floc is formed, which settles to the bottom and initially form a lid on the sediment surface. The effects of Chironomus plumosus larvae on sediment nutrient fluxes and P binding-sites in the sediment after addition of Al were tested. C. plumosus larvae were added to sediment cores in which sediment-water fluxes of nutrients were measured four times. After one month, the sediment was sectioned with depth and P fractions were measured by sequential chemical extraction. The chironomids created burrows through the Al layer which caused a significantly increased efflux of P from the Al treated sediment, because the P had only limited contact to the added Al. The chironomids also affected the P fractions in the sediment by their bioturbating activity. Thus, they caused increased Al concentrations in the upper part of the Al treated sediment. This created an enhanced contact between Al and P in the upper 7 cm of the sediment and, as a result, an increased binding of P to Al and a lowered porewater P. The DIP efflux is therefore expected to be lowered after the initial phase. Al had no effects on the nitrogen fluxes, but the chironomids enhanced the [graphic removed] release, and decreased the [graphic removed] release or increased the [graphic removed] uptake by the sediments.

Pedotransfer functions based on general purpose Freundlich isotherms (GPF) were derived for Cd using different combinations of input variables or development conditions. The models match the criterion of flexibility as they were derived from data of 497 soil samples, which had strongly varying soil characteristics. The prediction efficiency of the approaches was investigated by comparison of measured and simulated sorption data for 124 independent soil samples. The parameterisation of the GPF shows that models derived from data of batch sorption experiments by multiple linear regression achieve best goodness-of-fit and statistical consistency. The use of extraction data or nonlinear regression analysis results in greater deviations from the statistical optima. The best overall performance considering parameterisation and validation was observed for the models including (a) the variables 'proton activity', 'clay content', 'soil organic carbon', 'sum of dithionite-extractable Fe- and Mn-oxides' or (b) the variables 'proton activity', 'potential cation exchange capacity', 'sum of dithionite-extractable Fe- and Mn-oxides'.

The objectives of this study were to simplify sample preparation and validate mercury detection in soil and plant samples using inductively coupled plasma atomic emission spectroscopy (ICP-AES). A set of mercury contaminated and mercury free soil and plant samples were digested and analyzed by ICP-AES, inductively coupled plasma mass spectrometry (ICP-MS), and cold vapor atomic absorption spectroscopy (CVAAS). Results show that mercury measurements in soil and plant samples using ICP-AES were in agreement with those analyzed using ICP-MS and CVAAS. The concentrations of mercury in soils and plant tissues determined by ICP-AES were 92.2% and 90.5% of those determined by CVAAS and ICP-MS, respectively. Digestion of soil samples with 4 M HNO₃ and direct measurement by ICP-AES without reduction of Hg²⁺ to Hg⁰ gave a reasonable and acceptable recovery (92%) for determining Hg in soils. We conclude that ICP-AES with optimized conditions (addition of gold chloride, extension of washing time, linear working range, and selection of wavelength - 194 nm) resulted in reliable detection of mercury in environmental samples.

Lithological and granulometric investigations of the surface and short core sediments in L. Martiska (northeastern Estonia) showed that variations in the grain-size parameters and LOI content were influenced by the changes in deposition conditions during the regression and transgression phases monitored in the lake since the 1960s. During the regression and transgression phases displacement of the erosion-transport-accumulation zones in the lake took place depending on the bottom topography. The water level fluctuations are especially clearly reflected in grain-size variations in cores from peripherial area.