A three-dimensional circulation model (the Environmental Fluid Dynamic Code) was used to examine the role that physical forcing (river discharge, wind speed and direction) plays in controlling hypoxia in waters adjacent to the Yangtze Estuary. The model assumes that the biological consumption of oxygen is constant in both time and space, which allows the role of physical forcing in modulating the oxygen dynamics to be isolated. Despite of the simplicity of this model, the simulation results showed that it can reproduce the observed variability of dissolved oxygen in waters adjacent to the Yangtze Estuary, thereby highlighting the important role of changes in physical forcing in the variation of hypoxia. The scenarios tested revealed appreciable changes in the areal extent of hypoxia as a function of wind speed and wind direction. Interestingly, well-developed hypoxia was insensitive to river discharge.

Few water quality measurements exist from pristine environments, with fewer reported studies of coastal water quality from Solomon Islands. Water quality benchmarks for the Solomons have relied on data from other geographic regions, often from quite different higher latitude developed nations, with large land masses. We present the first data of inshore turbidity and sedimentation rate for a pristine catchment on Isabel Island. Surveys recorded relatively high coral cover. The lowest cover was recorded at 22.7% (Jejevo) despite this site having a mean turbidity (continuous monitoring) of 32 NTU. However, a similar site (Jihro) was significantly less turbid (2.1 mean NTU) over the same period. This difference in turbidity is likely due to natural features of the Jihro River promoting sedimentation before reaching coastal sites. We provide an important baseline for Solomon Island inshore systems, whilst demonstrating the importance of continuous monitoring to capture episodic high turbidity events.

Bioavailability of petroleum substances is a complex issue that is affected by substance composition, the physicochemical properties of the individual constituents, and the exposure preparation system. The present study applies mechanistic fate and effects models to characterize the role of droplet oil on dissolved exposure and predicted effects from both neat and weathered crude oils, and refined fuel oils. The main effect from droplet oil is input of additional dissolved hydrocarbons to the exposure system following preparation of the initial stock solution. Toxicity was characterized using toxic units (TU) and shows that replenishment of bioavailable hydrocarbons by droplets in toxicity tests with low droplet content (e.g., <1mg/L) is negligible, consistent with typical exposure conditions following open ocean oil spills. Further, the use of volumetric exposure metrics (e.g., mg/L) introduces considerable variability and the bioavailability-based metrics (e.g., TUs) provide a more consistent basis for understanding oil toxicity data.

The colourless mat covering organically enriched sediments underlying an intensive salmon farm in Estero Pichicolo, southern Chile, was surveyed by combined 454 PyroTag and conventional Sanger sequencing of 16S/18S ribosomal RNA genes for Bacteria and Eukarya. The mat was dominated by the sulphide-oxidizing bacteria (SOB) Candidatus Isobeggiatoa, Candidatus Parabeggiatoa and Arcobacter. By order of their abundances, sulphate-reducing bacteria (SRB) were represented by diverse deltaproteobacterial Desulfobacteraceae, but also within Desulfobulbaceae, Desulfuromonadaceae and Desulfovibrionaceae. The eukaryotic PyroTags were dominated by polychaetes, copepods and nematodes, however, ciliated protozoans were highly abundant in microscopy observations, and were represented by the genera Condylostoma, Loxophyllum and Peritromus. Finally, the abundant Sulfurimonas/Sulfurovum also suggest the occurrence of zero-valence sulphur oxidation, probably derived from Beggiatoaceae as a result of bacteriovorus infaunal activity or generated as free S0 by the Arcobacter bacteria. The survey suggests an intense and complex sulphur cycle within the surface of salmon-farm impacted sediments.

There has been growing concern about potential health risks from exposure to PM2.5 (fine particulate matter). The importance of conducting simultaneous indoor and outdoor measurements emerged because people, especially in developed countries, spend more than 90% of their time indoors. Great spatial and temporal variations in human exposure to PM2.5 have recently been reported. This review aims to identify the main research areas that have attracted recent attention, any possible gaps in the measurements of PM2.5 in various microenvironments, and the relationships between indoor and outdoor concentrations. This study also provides recommendations for further studies on PM2.5 measurement methods and exposure levels. To achieve these goals, this review included articles published online from 2003 to 2013 in the Science Direct and Web of Science databases. In the initial screening stage, 113 abstracts selected while 61 articles were remained for full review. The reviewed studies consistently showed positive correlations between indoor and outdoor PM2.5. Sulfate/sulfur concentrations were used intensively for calculating the infiltration factor (FINF). The higher FINF indicated high infiltration of outdoor PM2.5 into indoor areas. Great percentage (42%) of the reviewed filter–based studies was conducted in Europe, followed by a similar amount (38%) in the USA, and 20% in Asia, indicating a lack in PM2.5 research in other parts of the world. It was difficult to conclude that ambient fixed–site monitoring provided accurate estimations of actual exposure to PM2.5– Studies shown trends of higher personal concentrations compared to indoor and outdoor ones. Higher indoor levels of OC (organic carbon), compared to outdoor levels, were consistently reported. The opposite trend was true for EC (elemental carbon), and there were higher indoor OC/EC ratios than outdoor OC/EC ratios. There was a consistent general trend of a high (r>0.70) correlation between indoor and outdoor EC, while the correlation between indoor and outdoor OC was much weaker (r=022–0.75). The higher indoor OC/EC ratios, compared to the outdoor OC/EC ratios, reflects multiple sources of indoor OC. Sulfate (SO42–), nitrate (NO3–), and ammonium (NH4+) were primary contributors to PM2.5 mass.

Historical trends (1998–2012) nickel (Ni), copper (Cu) and chromium (Cr) concentrations in marine sediments were assessed at four locations in the Northern Adriatic Sea (Croatia) in the proximity of an oil refinery. Ecological risks were characterized by benchmarking the dataset against Sediment Quality Guidelines (SQG). A significant number of samples had Ni values above ERL with no exceedance of the ERL values for Cu and Cr. Weak positive historical trends were found for only for Cu. At all sites there were statistically significant correlations between Ni and Cr indicating a common origin of these heavy metals in the investigated marine sediments. There were statistically significant differences between the sites under the direct influence of the oil refinery compared to the control site indicating the possibility that the oil refinery is contributing to the concentration of these heavy metals in the marine sediments.

Terrestrial runoff and flooding have resulted in major impacts on coral communities worldwide, but we lack detailed understanding of flood plume conditions and their ecological effects. Over the course of repeated flooding between 2010 and 2013, we measured coral cover and water quality on the high-latitude coral reefs of Hervey Bay, Queensland, Australia. In 2013, salinity, total suspended solids, total nitrogen and total phosphorus were altered for up to six months post-flooding. Submarine groundwater caused hypo-saline conditions for a further four months. Despite the greater magnitude of flooding in 2013, declines in coral abundance (∼28%) from these floods were lower than the 2011 flood (∼40%), which occurred immediately after a decade of severe drought. There was an overall cumulative decrease of coral by ∼56% from 2010 to 2013. Our study highlights the need for local scale monitoring and research to facilitate informed management and conservation of catchments and marine environments.

In this study, the occurrence and spatial distribution of 38 antibiotics in surface water and sediment samples of the Hailing Bay region, South China Sea, were investigated. Twenty-one, 16 and 15 of 38 antibiotics were detected with the concentrations ranging from <0.08 (clarithromycin) to 15,163ng/L (oxytetracycline), 2.12 (methacycline) to 1318ng/L (erythromycin–H2O), <1.95 (ciprofloxacin) to 184ng/g (chlortetracycline) in the seawater, discharged effluent and sediment samples, respectively. The concentrations of antibiotics in the water phase were correlated positively with chemical oxygen demand and nitrate. The source analysis indicated that untreated domestic sewage was the primary source of antibiotics in the study region. Fluoroquinolones showed strong sorption capacity onto sediments due to their high pseudo-partitioning coefficients. Risk assessment indicated that oxytetracycline, norfloxacin and erythromycin–H2O posed high risks to aquatic organisms.

The disturbance and subsequent dispersion of sediment arising from aggregate dredging results in increases in suspended sediment concentrations and, potentially, settlement of fine sediment or sand onto the bed, which may both cause adverse effects on local ecology. This subject is one area which has seen much research over many years and this paper sets out to synthesise some basic general conclusions for use when assessing the significance of planned operations. The literature detailing the dispersion of fine sediment plumes, and the longer term dispersion of sand released through the dredging process, is scrutinised, and in some cases re-evaluated, and used to identify an evidence-based footprint of potential impact.