Unscientific management and ad-hoc approaches in municipal solid waste management have led to a generation of voluminous leachate in urban conglomerates. Quantification, quality assessment, following treatment and management of leachate has become a serious problem worldwide. In this context, the present study investigates the physico-chemical and biological characterization of landfill leachate and nearby water sources and attempts to identify relationships between the key parameters together with understanding the various processes for chemical transformations. The analysis shows an intermediate leachate age (5–10 years) with higher nutrient levels of 10,000–12,000 mg/l and ∼2000–3000 mg/l of carbon (COD) and nitrogen (TKN) respectively. Elemental analysis and underlying mechanisms reveal chemical precipitation and co-precipitation as the vital processes in leachate pond systems resulting in accumulation of trace metals. Based on the above criteria the samples were clustered into major groups that showed a clear distinction between leachate and water bodies. The microbial analysis showed bacterial communities correlating with specific factors relevant to redox environments indicating a gradient in nature and abundance of biotic diversity with a change in leachate environment. Finally, the quality and the contamination potential of the samples were evaluated with the help of leachate pollution index (LPI) and water quality index (WQI) analysis. The study helps in understanding the contamination potential of landfill leachate and establishes linkages between microbial communities and physico-chemical parameters for effective management of landfill leachate.

Studded tyres made of tungsten carbide cobalt (WC-Co) are in the Northern countries commonly used during the winter time. Tungsten (W)-containing nano- and micron-sized particles have been detected close to busy roads in several European countries. Other typical traffic wear particles consist of copper (Cu). The aims of this study were to investigate particle stability and transformation/dissolution properties of nanoparticles (NPs) of WC-Co compared with NPs of tungsten carbide (WC), cobalt (Co), and Cu. Their physicochemical characteristics (primarily surface oxide and charge) are compared with their extent of sedimentation and metal release in synthetic surface water (SW) with and without two different model organic molecules, 2,3- and 3,4-dihydroxybenzoic acid (DHBA) mimicking certain sorption sites of humic substances, for time periods up to 22 days. The WC-Co NPs possessed a higher electrochemical and chemical reactivity in SW with and without DHBA molecules as compared with NPs of WC, Co, and Cu. Co was completely released from the WC-Co NPs within a few hours of exposure, although it remained adsorbed/bonded to the particle surface and enabled the adsorption of negatively charged DHBA molecules, in contrast with the WC NPs (no adsorption of DHBA). The DHBA molecules were found to rapidly adsorb on the Co and Cu NPs. The sedimentation of the WC and WC-Co NPs was not influenced by the presence of the 2,3- or 3,4-DHBA molecules. A slight influence (slower sedimentation) was observed for the Co NPs, and a strong influence (slower sedimentation) was observed for the Cu NPs in SW with 2,3-DHBA compared with SW alone. The extent of metal release increased in the order: WC < Cu < Co < WC-Co NPs. All NPs released more than 1 wt-% of their metal total mass. The release from the Cu NPs was most influenced by the presence of DHBA molecules.

Phytoremediation, a technique used to reclaim heavy metal-contaminated soils, requires an understanding of plant physiological responses to heavy metals. However, the majority of studies documenting heavy metal impact on plant functioning have been performed in laboratory or greenhouse settings. We predicted that increased soil heavy metal concentrations reduce photosynthesis and biomass production in trees growing in metal contaminated soil in a naturally re-vegetated urban brownfield. Leaf gas exchange, leaf carbon and nitrogen concentration, and tree biomass were recorded and compared for Populus deltoides and Populus tremuloides growing in an urban brownfield. The CO2 compensation point (CCP) differed significantly between soil metal concentrations and species, with P. deltoides displaying a greater CCP and P. tremuloides displaying a lower CCP as soil metal concentration increased, despite no changes in dark respiration for either species. In terms of biomass, only total branch weight (TBW) and leaf area (LA) differed significantly between soil metal concentrations, though the difference was largely attributable to variation in diameter at breast height (DBH). Furthermore, TBW and LA values for P. deltoides did not decrease with increasing soil metal concentration. Soil metal concentration, thus, had minimal effect on the relationship between tree age and DBH, and no effect on relationships of tree age and height or LA, respectively. Significant differences between soil metal concentrations and species were found for δ15N (isotopic nitrogen ratio) while leaf nitrogen content (% N) also differed significantly between species. Long-term water use efficiency derived from carbon isotope analysis (iWUEisotope) differed significantly between trees grown on different soil metal concentrations and a significant species-metal concentration interaction was detected indicating that the two study species responded differentially to the soil metal concentrations. Specifically, P. tremuloides enhanced while P. deltoides reduced long-term iWUEisotope as soil metal concentration increased, further emphasizing the importance of species and possible genotype selection for phytoremediation.

There are serious concerns over the adverse impacts of microplastics (MPs) on living organisms. The main objective of this study was to test the effects of MPs on the total length, weight, condition factor (CF), transcriptional level of antioxidant, anti and pro-apoptotic, and neurotransmitter genes, and the histopathology of the gill, liver, brain, kidney, and intestine in the larvae of zebrafish (Danio rerio). Fish were exposed to one of three levels of pristine low-density polyethylene (LDPE) fragments (5, 50, or 500 μg/L) for 10 or 20 days. No significant changes were observed in any of the selected biomarkers across MP concentrations at days 10 or 20. The expression of casp9 (caspase 9, apoptosis-related cysteine protease), casp3a (caspase 3, apoptosis-related cysteine protease a) and cat (catalase), however, were significantly lower in the larvae sampled at day 20 than day 10. We provide evidence that virgin short-term exposure to LDPE fragments has minimal impact on biomarker responses in D. rerio larvae.

Assessing the space-time trends and detecting the sources of heavy metal accumulation in soils have important consequences in the prevention and treatment of soil heavy metal pollution. In this study, we collected soil samples in the eastern part of the Qingshan district, Wuhan city, Hubei Province, China, during the period 2010–2014. The Cd, Cu, Pb and Zn concentrations in soils exhibited a significant accumulation during 2010–2014. The spatiotemporal Kriging technique, based on a quantitative characterization of soil heavy metal concentration variations in terms of non-separable variogram models, was employed to estimate the spatiotemporal soil heavy metal distribution in the study region. Our findings showed that the Cd, Cu, and Zn concentrations have an obvious incremental tendency from the southwestern to the central part of the study region. However, the Pb concentrations exhibited an obvious tendency from the northern part to the central part of the region. Then, spatial overlay analysis was used to obtain absolute and relative concentration increments of adjacent 1- or 5-year periods during 2010–2014. The spatial distribution of soil heavy metal concentration increments showed that the larger increments occurred in the center of the study region. Lastly, the principal component analysis combined with the multiple linear regression method were employed to quantify the source apportionment of the soil heavy metal concentration increments in the region. Our results led to the conclusion that the sources of soil heavy metal concentration increments should be ascribed to industry, agriculture and traffic. In particular, 82.5% of soil heavy metal concentration increment during 2010–2014 was ascribed to industrial/agricultural activities sources.Using STK and SOA to obtain the spatial distribution of heavy metal concentration increments in soils.Using PCA-MLR to quantify the source apportionment of soil heavy metal concentration increments.

In January 2013, the real-time hourly average concentrations of six pollutants (CO, NO2, O3, PM10, PM2.5 and SO2) based on data from air quality monitoring stations in major Chinese cities were released to the public. That report provided a good opportunity to publicise nationwide temporal and spatial pollution characteristics. Although several studies systematically investigated the temporal and spatial trends of pollutant concentrations, the relation between air pollution and multi-scale meteorological conditions and their spatial variations on a nationwide scale remain unclear. This study analysed the air pollution characteristics and their relation to multi-scale meteorological conditions during 2014–2015 in 31 provincial capital cities in China. The annual average concentrations of six pollutants for 31 provincial capital cities were 1.2 mg m−3, 42.4 μg m−3, 49.0 μg m−3, 109.8 μg m−3, 63.7 μg m−3, and 32.6 μg m−3 in 2014. The annual average concentrations decreased 5.3%, 4.9%, 11.4%, 12.0% and 21.5% for CO, NO2, PM10, PM2.5 and SO2, respectively, but increased 7.4% for O3 in 2015. The highest rate of a major pollutant over China was PM2.5 followed by PM10, O3, NO2, SO2 and CO. Meteorological conditions were the primary factor determining day-to-day variations in pollutant concentrations, explaining more than 70% of the variance of daily average pollutant concentrations over China. Meteorological conditions in 2015 were more adverse for pollutant dispersion than in 2014, indicating that the improvement in air quality was caused by emission controls.

Piscivorous species like the Little Penguin (Eudyptula minor) are particularly at risk of being negatively impacted by pollution due to their heightened exposure through aquatic food chains. Therefore, determining the concentration of heavy metals in the fish prey of seabirds is an essential component of assessing such risk. In this study, we report on arsenic, cadmium, mercury, lead and selenium concentrations in three fish species, which are known to comprise a substantial part of the diet of Little Penguins at the urban colony of St Kilda, Melbourne, Australia. Metal concentrations in the fish sampled were generally within the expected limits, however, arsenic and mercury were higher than reported elsewhere. Anchovy (Engraulis australis) and sandy sprat (Hyperlophus vittatus) contained higher Hg concentrations than pilchard (Sardinops sagax), while sandy sprat and pilchard contained more selenium. We present these findings together with metal concentrations in Little Penguin blood and faeces, sampled within weeks of the fish collection. Mercury concentrations were highest in the blood, while faeces and fish prey species contained similar concentrations of arsenic and lead, suggesting faeces as a primary route of detoxification for these elements. We also investigated paired blood - faecal samples and found a correlation for selenium only. Preliminary data from stable isotope ratios in penguin blood indicate that changes in penguin blood mercury concentrations cannot be explained by trophic changes in their diet alone, suggesting a variation of bioavailable Hg within this semi-enclosed bay.

Riverine transport to the marine environment is an important pathway for microplastic. However, information on fate and transport of nano- and microplastic in freshwater systems is lacking. Here we present scenario studies on the fate and transport of nano-to millimetre sized spherical particles like microbeads (100 nm–10 mm) with a state of the art spatiotemporally resolved hydrological model. The model accounts for advective transport, homo- and heteroaggregation, sedimentation-resuspension, polymer degradation, presence of biofilm and burial. Literature data were used to parameterize the model and additionally the attachment efficiency for heteroaggregation was determined experimentally. The attachment efficiency ranged from 0.004 to 0.2 for 70 nm and 1050 nm polystyrene particles aggregating with kaolin or bentonite clays in natural freshwater. Modeled effects of polymer density (1–1.5 kg/L) and biofilm formation were not large, due to the fact that variations in polymer density are largely overwhelmed by excess mass of suspended solids that form heteroaggregates with microplastic. Particle size had a dramatic effect on the modeled fate and retention of microplastic and on the positioning of the accumulation hot spots in the sediment along the river. Remarkably, retention was lowest (18–25%) for intermediate sized particles of about 5 μm, which implies that the smaller submicron particles as well as larger micro- and millimetre sized plastic are preferentially retained. Our results suggest that river hydrodynamics affect microplastic size distributions with profound implications for emissions to marine systems.

The aim of this study was to determine the effect of persistent organic pollutants (POPs) and biometric variables on circulating levels of steroid hormones (androgens, estrogens and progestagens) in male polar bears (Ursus maritimus) from Svalbard, Norway (n = 23). Levels of pregnenolone (PRE), progesterone (PRO), androstenedione (AN), dehydroepiandrosterone (DHEA), testosterone (TS), dihydrotestosterone (DHT), estrone (E1), 17α-estradiol (αE2) and 17β-estradiol (βE2) were quantified in polar bear serum by gas chromatography tandem mass spectrometry (GC-MS/MS), while POPs were measured in plasma. Subsequently, associations between hormone concentrations (9 steroids), POPs (21 polychlorinated biphenyls (PCBs), 8 OH-PCBs, 8 organochlorine pesticides (OCPs) and OCP metabolites, and 2 polybrominated diphenyl ethers (PBDEs)) and biological variables (age, head length, body mass, girth, body condition index), capture date, location (latitude and longitude), lipid content and cholesterol levels were examined using principal component analysis (PCA) and orthogonal projections to latent structures (OPLS) modelling. Average concentrations of androgens, estrogens and progestagens were in the range of 0.57–83.7 (0.57–12.4 for subadults, 1.02–83.7 for adults), 0.09–2.69 and 0.57–2.44 nmol/L, respectively. The steroid profiles suggest that sex steroids were mainly synthesized through the Δ-4 pathway in male polar bears. The ratio between androgens and estrogens significantly depended on sexual maturity with androgen/estrogen ratios being approximately 60 times higher in adult males than in subadult males. PCA plots and OPLS models indicated that TS was positively related to biometrics, such as body condition index in male polar bears. A negative relationship was also observed between POPs and DHT. Consequently, POPs and body condition may potentially affect the endocrinological function of steroids, including development of reproductive tissues and sex organs and the general condition of the male polar bears.

Nitrated phenols are among the major constituents of brown carbon and affect both climates and ecosystems. However, emissions from biomass burning, which comprise one of the most important primary sources of atmospheric nitrated phenols, are not well understood. In this study, the concentrations and proportions of 10 nitrated phenols, including nitrophenols, nitrocatechols, nitrosalicylic acids, and dinitrophenol, in fine particles from biomass smoke were determined under three different burning conditions (flaming, weakly flaming, and smoldering) with five common types of biomass (leaves, branches, corncob, corn stalk, and wheat straw). The total abundances of fine nitrated phenols produced by biomass burning ranged from 2.0 to 99.5 μg m−3. The compositions of nitrated phenols varied with biomass types and burning conditions. 4-nitrocatechol and methyl nitrocatechols were generally most abundant, accounting for up to 88–95% of total nitrated phenols in flaming burning condition. The emission ratios of nitrated phenols to PM2.5 increased with the completeness of combustion and ranged from 7 to 45 ppmm and from 239 to 1081 ppmm for smoldering and flaming burning, respectively. The ratios of fine nitrated phenols to organic matter in biomass burning aerosols were comparable to or lower than those in ambient aerosols affected by biomass burning, indicating that secondary formation contributed to ambient levels of fine nitrated phenols. The emission factors of fine nitrated phenols from flaming biomass burning were estimated based on the measured mass fractions and the PM2.5 emission factors from literatures and were approximately 0.75–11.1 mg kg−1. According to calculations based on corn and wheat production in 31 Chinese provinces in 2013, the total estimated emission of fine nitrated phenols from the burning of corncobs, corn stalks, and wheat straw was 670 t. This work highlights the apparent emission of methyl nitrocatechols from biomass burning and provides basic data for modeling studies.