Organochlorine pesticides (OCPs) residues were determined in fillets of Lutjanus colorado, L. argentiventris, and L. novemfasciatus. Fillet samples were collected bimonthly from February 2012 to February 2013. OCPs average concentrations do not differ significantly according to size, weight, or season, nor do they relate with the physico-chemical parameters of the sea water. The highest concentration and most frequently encountered OCPs were endosulfan sulfate, δ-HCH, and heptachlor epoxide, which indicates their use in the recent past and confirms their persistence. Average concentrations of ∑HCHs, ∑chlordane, and ∑heptachlor in samples were above cancer MRLs according to data from monthly consumed portions. HCHs and heptachlor are listed in Appendix III of the Rotterdam Convention of chemicals placed on a prior informed consent procedure for import and export purposes; they are considered illegal in Mexico. The OCPs concentrations above cancer MRLs in Lutjanus spp. turn its frequent consumption into a human health risk.

Biofilm-dwelling ciliates are primary components of the eukaryotic microperiphyton in both species composition and community structure. To evaluate the congruency of biofilm-dwelling ciliates as potential surrogates of the eukaryotic microperiphyton, a dataset was collected every month at four stations from the coastal waters of the Yellow Sea, northern China, and assessed. Sufficient species abundance data were obtained for ciliated protozoans at high taxonomic levels up to the family level, indicating a significant variation along the gradient of contamination. Correlation analyses revealed that the taxa richness of these matrices can explain >85% of the variance in that of the full species dataset. The cost/benefit analysis showed that the protozoan subset at low resolutions up to the family level may be used as a potential surrogate of the original dataset. Thus, we suggest that the protozoan assemblages at genus- and/or family-level resolutions may be useful, cost-efficient surrogates of the original dataset for bioassessment in marine ecosystems.

Although considered pristine, Antarctica has not been impervious to hydrocarbon pollution. Antarctica’s history is peppered with oil spills and numerous abandoned waste disposal sites. Both spill events and constant leakages contribute to previous and current sources of pollution into marine sediments. Here we compare the response of the benthic diatom communities over 5years to exposure to a commonly used standard synthetic lubricant oil, an alternative lubricant marketed as more biodegradable, in comparison to a control treatment. Community composition varied significantly over time and between treatments with some high variability within contaminated treatments suggesting community stress. Both lubricants showed evidence of significant effects on community composition after 5years even though total petroleum hydrocarbon reduction reached approximately 80% over this time period. It appears that even after 5years toxicity remains high for both the standard and biodegradable lubricants revealing the temporal scale at which pollutants persist in Antarctica.

This study classifies Mediterranean marine protected areas (MPAs) according to the combined result of pressure level and protection. Six major marine environment pressures were considered: pressures from fish farms, fishing, marine litter, pressures from marinas, pollution from maritime transport, and climate change. MPA protection was assessed through legal protection and management effort. Most MPA area in the Mediterranean is under relatively high pressure level and afforded low protection. Inshore areas show higher pressure levels. Five marine ecoregions, nine countries and nineteen MPA designation categories have over 50% of their MPA area under major concern. The mean number of cumulative pressures occurring in priority MPAs ranges between three and four, although the mean combined intensity of those pressures is low. However, these figures are most likely underestimated, especially for the southern Mediterranean. The most concerning pressures to MPAs regarding extent and intensity were: climate change, fishing and pollution from maritime transport.

Spatial and temporal changes around an area of conventional coastal engineering can be easily observed from field surveys because of the clear cause-and-effect observable in the before and after stages of the project. However, it is more difficult to determine environmental changes in the vicinity of tidal flats and coastal areas that are a considerable distance from the project. To identify any unexpected environmental impacts of the construction of Saemangeum Dyke in the area, we examined morphological changes identified by satellite-based observations through a field survey on Gomso Bay tidal flats (15km from Saemangeum Dyke), and changes in the suspended sediment distribution identified by satellite-based observations through a hydrodynamic analysis in the Saemangeum and Gomso coastal area. We argue that hydrodynamic changes due to conventional coastal engineering can affect the sedimentation pattern in the vicinity of tidal flats. We suggest that the environmental impact assessment conducted before a conventional coastal engineering project should include a larger area than is currently considered.

High density polyethylene (HDPE) is the most commonly found non-degradable solid waste among the polyethylene. In this present study, HDPE degrading various fungal strains were isolated from the polyethylene waste dumped marine coastal area and screened under in vitro condition. Based on weight loss and FT-IR Spectrophotometric analysis, two fungal strains designated as VRKPT1 and VRKPT2 were found to be efficient in HDPE degradation. Through the sequence analysis of ITS region homology, the isolated fungi were identified as Aspergillus tubingensis VRKPT1 and Aspergillus flavus VRKPT2. The biofilm formation observed under epifluorescent microscope had shown the viability of fungal strains even after one month of incubation. The biodegradation of HDPE film nature was further investigated through SEM analysis. HDPE poses severe environmental threats and hence the ability of fungal isolates was proved to utilize virgin polyethylene as the carbon source without any pre-treatment and pro-oxidant additives.

Marine debris is a global issue that can have devastating impacts on marine mammals. To understand the types of materials that result in entanglement and thus the potential impact of entangling items on marine wildlife, we analysed data collected from items in which Australian fur seals had been entangled in southern Victoria, Australia over a 15year period. From 1997 to 2012, 138 entangling items were removed from seals. The majority of these entanglements were plastic twine or rope, and seals were entangled in green items more than in any other colour. In general, younger seals were more likely to be entangled than adults. Understanding the effects of marine debris entanglement on the Australian fur seal population can lead to more effective management of the sources of debris and the wildlife that interact with it.

An elementary school is an important public place for children and it is where they spend most of their days. The objective of this study was to survey the environmental conditions at schools and to assess the relationship between air pollution and allergic diseases using the International Study of Asthma and Allergies in Childhood questionnaire. Nine elementary schools were selected and subsequently classified into three groups. The selection included two schools with no traffic-related or other pollutants, four schools situated near roads with six lanes, and three schools situated near beltways. Allergic diseases were assessed in a total of 6301 students. School zones with critical exposure to pollutants were selected within each school and were evaluated based on the levels of particulate matter, fine particulate matter, ozone, carbon monoxide, carbon dioxide, nitrogen dioxide, sulfur dioxide and black carbon. O3 and PM10 exposures were significantly associated with the prevalence of lifetime symptoms and diagnosis of asthma. O3 and PM10 exposures were also associated with lifetime symptoms, diagnosis, and 1-year physician diagnosis prevalence of allergic rhinitis. BC exposure was significantly associated with the rates of 1-year treatment of disease for allergic rhinitis. For schools located near sources of air pollution, the prevalence of lifetime symptoms for atopic dermatitis was significantly increased. Some symptoms of allergies were significantly increased at schools surrounded by a higher traffic volume. This study provides additional evidence that exposure to school zone air pollutants and traffic volume put school children at risk for childhood allergic diseases. Thus, strategies and actions are necessary to protect children in schools from exposure to environmental pollutants. In addition, future analysis to evaluate the relationship between traffic-related air pollution and the development of allergic diseases at more advanced ages are needed to confirm or refute these associations.

Temperature can play a significant role in the efficacy of solidifiers in removing oil slicks on water. We studied and quantified the effect of temperature on the performance of several solidifiers using 5 different types of oils under a newly developed testing protocol by conducting experiments in constant temperature rooms set at 22°C and 5°C. The results indicated that solidifier efficiency decreased substantially at the lower temperature, especially at lower application rates. The removal efficiency of the solidifier was in general directly proportional to temperature, except for the heavier oils, where removal by attachment was observed. Solidifier products with lower powder bulk density exhibited the best removal effectiveness. Analysis of experimental data yielded empirical correlations involving certain operational variables such as application rate, temperature, solidifier property (bulk density), and oil property (viscosity). Regression analysis was used to fit a mathematical model to the experimental solidifier effectiveness data.