This research was carried out to start the discussion on the amount of harmful emissions that are emitted in producing building and insulation materials for roof constructions. Usually, for the improvement of energy efficiency of buildings and reduction of the embodied thermal energy, effective thermal insulation solutions for the external building envelope have to be provided. From the buildings available for the analysis, in Latvia there were selected multi-apartment buildings of separate series with a uniform composition of roof constructions. Within the context of renovation works, the reports of energy audit for the buildings contain recommendations referred to improvement of the thermal performance of roofs. Using mutually comparable energy efficiency report data, there was drawn up an averaged model of a five-storey multi-apartment residential house. There were taken into account legislative documents relating to thermal engineering of buildings: LBN 002-01 ‘Heat engineering of building boundary constructions’ and LVS EN ISO 6946: 2007 ‘Building components and building elements – Thermal resistance and thermal transmittance’, and moisture regime according to LVS EN ISO 13788: 2001 ‘Hygrothermal performance of building components and building elements – internal surface temperature to avoid critical surface humidity and interspatial condensation – calculation methods’, which states that the roof constructions should be free from possibility of water vapour condensation. In this study, there were calculated energy savings obtained by improving thermal resistance of the roof constructions and the opposite primary energy consumption for the production of building materials. As a result, there is obtained environmentally friendly roof construction.

Yasso07 soil carbon model was used to estimate soil carbon balance in dry forest site types (6 site types in total) in Latvia and the results were compared with data from Biosoil2012 soil surveys. Litter input, chemical quality and climatic data are required to run the model. Three different scenarios were used for climate data input – steady climate, climate change + 0.025 °C annually and climate change + 0.05 °C annually. Forest mineral soil is a carbon sink for the whole modelled period - the years of 1990 – 2030. Under steady climate, the average carbon removal is 0.6 t CO2 haE-1 yrE-1, under climate change (+ 0.025 °C) scenario 0.4 t CO2 haE-1 yrE-1, but under climate change (+ 0.05 °C) scenario 0.3 t CO2 haE-1 yrE-1. CO2 removal at the beginning of the period (1990) was 0.35 – 0.38 t CO2 haE-1 yrE-1. Carbon stock modelled with Yasso07 is lower than estimated in Biosoil2012 soil surveys. Differences between modelled and Biosoil2012 results vary from 2 t C haE-1 in the poorest and 41 t CO2 haE-1 in the third poorest site type. Carbon stock modelled with Yasso07 increases from the poorest to the most fertile site type while Biosoil2012 shows an increase from the poorest to the third poorest, and a decrease from the third poorest to the most fertile site type. Underestimation and different trends between Yasso07 and measured carbon stock may be explained by inappropriate equations and models used to estimate non-woody biomass. It is necessary to improve accuracy of input data for non-woody biomass by elaborating national equations and models in order to include Yasso07 in the national GHG inventory.

The aim of paper is a comparative analysis of on-farm greenhouse gas emissions across family farm types and farm size classes using FADN data in Lithuania. To achieve this, Lithuanian FADN data of 2014 were used for the analysis. The research draws on a sample of 1304 family farms. The methodology is based on an adaptation of the IPCC guidelines using Lithuanian emission factors from Lithuania’s National Inventory Report and the activity data of family farms derived from Lithuanian FADN. The GHG emissions were analysed per farm (t CO2eq farmE-1) and per hectare (CO2eq haE-1 of UAA). The research found out that the major sources of GHG emissions are related to the use of chemical fertilizers on farms comprising 52.6% of the total emissions from family farms. The performed analysis shows that GHG emissions per farm depended on the farm size and ranged from 63.3 t CO2eq farmE-1 to 479.6 t CO2eq farmE-1, on farm size class less than 30 ha UAA and from 500 ha UAA or over, respectively. The GHG emissions on family farms totalled 184.2 t CO2eq farmE-1 and ranged from 5.8 t CO2eq farm E-1 to 234.6 t CO2eq farmE-1, in the permanent crops farms and in the specialist dairying farms, respectively.

Ruminants produce a large amount of methane (CH4 ) and carbon dioxide (CO2 ) in their foregut. These gases cause greenhouse effect. There are a lot of studies about different feed additives which can reduce the production of greenhouse gases in ruminants. Prebiotics can also change the amount of bacteria in animal gastrointestinal tract and reduce the occurrence of diarrhoea. The aim of this study was to test whether the prebiotic inulin affects the production of CH4 and CO2 in calves’ rumen and whether it affects the bacteria count in the rumen fluid and bacterial overgrowth in intestines. We used the flour of Jerusalem artichoke (Helianthus tuberosus L.) containing 50% of inulin. Approximately fifty days old, Holstein Friesian crossbreed calves were used in this study. Eight were in the control group, 8 received 12 g of flour and 8 received 24 g per day. On the 28th and 56th day of the research, we measured the amount of CH4 and CO2 in calves’ rumen took rumen fluid samples for bacterial analysis and urine to measure the level of phenol and indican. We concluded that adding the flour of Jerusalem artichoke at doses 12 g and 24 g did not significantly impact the production of CH4 and CO2 in calves’ rumen, the prebiotic inulin may suppress the growth of anaerobic microorganisms in the rumen at concentration 12 g of inulin reaching 56th day of experiment. The amount of phenol and indican in calves’ morning urine did not correlate with the faecal consistency of calves.

The aim of the study is to evaluate carbon stock in litter and organic forest soils in Latvia as well as to characterize accumulation of carbon in litter in afforested lands. The study is providing empirically valid information about soil and litter carbon changes for the National greenhouse gas (GHG) inventory by using data from National forest inventory (NFI), forest soil monitoring demonstration project BioSoil and other studies. The study proves significance of organic forest soil carbon pool in Latvia and demonstrates necessity to extend NFI incorporated forest soil monitoring program to improve data on soil density in wet organic soils, as well as to integrate data characterizing water regime in forests. The acquired data also proves that the conservative approach of calculation of carbon stock changes in litter in afforested lands applied in the Latvia’s National GHG inventory avoids overestimation of CO2 removals. The data on litter carbon stock collected in this study is sufficient to estimate total carbon stock for stands dominated by most common tree species and long term impact of changes of species composition. Measurements of organic soil and litter thickness should be continued by NFI and integrated with more detailed soil monitoring to increase accuracy of carbon stock estimates and gather data necessary for verification of modelling data, particularly in afforested lands and due to change of dominant species.

In the world, hydrological models are often used in the modelling of ecological components. In the context of the Paris Agreement and the European Green Deal, it is necessary to develop GHG emission modelling capabilities. The development and refinement of the conceptual model METQ is necessary not only for the quantitative analysis of flow, but in addition to its refinement, it is possible to conduct interdisciplinary research in the subfield of ecohydrology, which studies the interaction of water and ecosystems, and in environmental engineering, which addresses the issues of reducing diffuse pollution and reducing greenhouse gas emissions, technology implementation issues, where water content in the soil and groundwater fluctuations play one of the main roles, for example, in the processes of the formation of nitrous oxide emissions. This paper examines potential GHG emission calculation algorithms used to successfully model GHG emissions from soils, with a particular focus on agricultural soils, which contribute one of the largest amounts of GHG emissions in national emission reports for the agricultural sector. Available algorithms for nitrous oxide nitrification calculations are reviewed and possible algorithms that can be used for modelling emissions from soils and integrated into the conceptual hydrological model METQ are discussed. The developed conceptual solutions for modelling GHG emissions from soils will develop a modelling tool that will be used to estimate the volumes of GHG emissions and evaluate the effectiveness of various GHG emission reduction measures, as well as to perform a complex assessment of the soil GHG balance.

Urban trees, integral to urban environments, demonstrate intricate responses to atmospheric pollutants like particulate matter (PM), tropospheric ozone (O₃), and carbon dioxide (CO₂). Notably, O₃ induces oxidative stress in leaf tissues, while PM, consisting of fine airborne particles, interacts with urban trees through foliar deposition. This interaction is particularly interesting as tree canopies are highly effective filters, capturing and accumulating PM on their surfaces. The present study focused on silver birch, small-leaved lime, and Norway maple seedlings responses to elevated O₃ and CO₂). With and without PM. Maple seedlings exhibited the highest stem height increment, followed by lime and birch. Elevated O₃ and CO₂ without PM led to substantial height increments for lime and maple. Elevated O₃ and CO₂ without PM increased the total polyphenols in lime and maple leaves but decreased the content of total flavonoids in birch and lime leaves. Our findings underscore the adaptability of lime and maple seedlings to elevated O₃ and CO₂, positioning them as promising species for urban environments in the face of changing climates. Birch, while exhibiting biochemical changes, demonstrated less pronounced growth responses. This studyʼs insights into the intricate interactions between urban trees and multiple pollutants, particularly the species-specific responses, are of significant value for urban planning and environmental management.

The use of the smoke released during the wood burning process to prepare food products is a centuries-long tradition, practically all over the world. However, during the combustion process, a group of compounds called polyaromatic hydrocarbons (PAHs) are formed in the flue gases, which are carcinogenic and condense during the smoking process and diffuse into the smoked food product. Therefore, permissible PAH norms have been set for food producers, which significantly complicate the use of wood. In the study, using a gas analyser, we measured the flue gases released during the burning of specially made, apple and grey alder wood pellets, with and without enrichment of the supplied air with ozone. The use of ozone does not ensure a higher burning temperature of pellets, but it stabilizes it – temperature fluctuations are significantly wider using non-ozonised air (697 to 817 and 611 to 817 ℃, respectively). The content of CO2, CO, as well as CH4 and N2O increases significantly in apple wood flue gases using ozonised air, while CH4 increases and N2O decreases in grey alder smoke. Which generally indicates specific reactions with ozone during combustion. Comparing the flue gases released during the burning of apple and grey alder wood pellets, grey alder smoke contains significantly more N2O and CO2 than apple wood pellet flue gases. On the other hand, using ozonised air in the combustion process increases N2O significantly in the flue gas of apple tree pellets compared to white alder.

Nowadays, different sun protective creams are available in the market, but most of them contain harmful synthetic chemicals and minerals which can induce skin allergies and premature ageing. Usage of sunscreens and photoprotectors of natural origin and natural antioxidants can reduce skin damage caused by excessive sun exposure. The effectiveness of the use of β-carotene — vitamin’s A precursor against excessive irradiation caused by oxidative stress cell damages has been proven of its very good antioxidative properties and leading to sooner regeneration of the skin after several environmental damages. Carotenoids and high value oil can be extracted from pumpkin (Cucurbitta spp.) by-products — peel and seeds with SC CO2. The objective of this study was to incorporate pumpkin seed oil (PSO) and carotenoid extract (CE) from pumpkin by-products in to facial creams for UV protection. Two types of creams with PSO and CE were prepared emulsion o/w and w/o. A cream without extracts and natural ingredients was used as control sample. The sun protection factor values in vitro (SPF = 0.92 to 1.18), total content of carotenoids (TCC = 1.08–17.95 µg mLE−1), β-carotene content (0.64–0.72 µg mLE−1), total phenolic content (TPC = 62.64–95.82 mg GAE gE−1), antiradical scavenging activity (11.26–43.66 %) and rheological behaviour of facial creams were determined. Although creams with CE and PSO show comparatively low SPF values, ß-carotene and phenolic compounds found in samples demonstrated very high antioxidant abilities valuable for skin protection.

Agrifood systems are both a contributor to greenhouse gas (GHG) emissions and an important sector for achieving China’s 2060 carbon neutrality goal and mitigating climate change. Rising global temperatures and frequent extreme weather have greatly weakened agricultural production capacity (IPCC, 2021). The need to mitigate climate change by reducing GHG emissions has global consensus. In 2020, the Chinese government made an important commitment toward peaking its carbon dioxide emissions by 2030 and achieving carbon neutrality by 2060. Under China’s 2060 carbon neutrality goal, the contribution of agrifood systems to GHG emissions reduction cannot be ignored. According to estimates by the Academy of Global Food Economics and Policy (AGFEP) at China Agricultural University (AGFEP, 2021), GHG emissions from agrifood systems reached 1.09 billion metric tons (t) of CO2eq in 2018, accounting for 8.2 percent of total national GHG emissions. While ensuring food security as the top national priority, the combined measures can reduce GHG emissions by 47 percent by 2060, compared to 2020 levels; these measures include improving agricultural technologies, reducing food loss and waste, and shifting dietary patterns. When coupled with the carbon sequestration of land use, land-use change and forestry (LULUCF), agrifood systems can contribute significantly to achieving carbon neutrality (AGFEP, 2021). | Non-PR | 3 Building Inclusive and Efficient Markets, Trade Systems, and Food Industry; 1 Fostering Climate-Resilient and Sustainable Food Supply; DCA; IFPRI4 | DSGD