This article is covering results of pre-commercial thinning, forest infrastructure and undergrowth harvesting field studies implemented in July, 2007 by Skogforsk and LSFRI Silava. A scope of the study was to estimate prime costs of biofuel production from small trees and to compare two types of harvester heads (Bracke C16.a and Ponsse EH25). The productivity in pre-commercial thinning expressed as trees per E0-h (effective hour) ranged between 53 (Ponsse) and 118 (Bracke) in the pine stand and 150 (Bracke) in the mixed spruce stand. In comparison the LVm3 (LV - loose volume) ranged between 9.9 (Ponsse) and 14.1 (Bracke) in the pine stand and was 13.0 (Bracke) in the mixed spruce stand. In the forest infrastructure (roadside ditches) harvesting productivity was 8.2 LVm3 E0-hE-1 for Ponsse and 12.5 LVm3 E0-hE-1 for Bracke. Productivity was economically insufficient in undergrowth removal, both in harvesting (Bracke) and forwarding (Ponsse) operations, respectively 1.1 and 2.6 LVm3 E0-hE-1. Prime costs of harvesting, forwarding, comminution and chip transport (50 km one direction) in pre-commercial thinning in calculation to LVL LVm-3 were 5.93 for Ponsse and 5.85 for Bracke. Prime costs in forest infrastructure in LVL LVmE-3 were 4.97 (Ponsse) and 6.36 (Bracke). Only Bracke was tested in the undergrowth, where prime costs were 37.55 LVL LVm-3. 'Environmental footprint' of biofuel production from small trees in terms of carbon (C) emissions ranged from 2.6 to 10.2 kg CLVmE-3, including road transport (50 km) to terminal.

One of the key factors affecting the formation of high-quality forest is thinning. Latvia's yearly budget of commercial thinning is not met; therefore, there are plenty of forests which are not thinned as planned and this leads to declining quality of forest stands. The timber processing industry needs significant excluded volume of timber, but forest owners are unable to maximize profits in future. Extensive logging of commercial thinning is hindered by economic factors and forestry regulations. Logging business is not satisfied with the productivity indicates and restricting forestry and environmental laws. The world's leading forest engineering firm offers a variety of forest harvester design and structural solutions. The first real use of commercial harvesters in commercial thinning in Latvia's conditions revealed several problems. The most important one is how to increase harvester productivity, while ensuring the quality of residual stands. To increase effectiveness of the logging machines and the proportion of commercial thinning, it is necessary to explore main factors affecting harvester productivity. This work aims to clarify the main pressures hampering harvester productivity and evaluate the quality of remaining trees in commercial thinning in Latvia. The main results are that during night productivity of harvester decreases by 12%, while marking trees to be cut down with fluorescent colour increases productivity of harvester at night by 15%. Productivity of harvester in thinning depends on average volume of harvested trees. These results of the work were obtained through various experiments on twelve different commercial thinning areas in Latvia.

The study represents results of productivity studies of mechanized ditch cleaning using Ponsse Fox harvester adapted to multi-tree handling H6 head in forest drainage systems managed by Joint stock company “Latvia state forests”. The aim of the study is to evaluate productivity of extraction of biomass from ditches depending on working method and to estimate factors affecting prime-cost of biofuel in mechanized harvesting. The study results demonstrate that the 2nd method (mechanized extraction of roundwood and following motor-manual cleaning of remaining vegetation) is the most efficient solution for mechanized cleaning of ditches. Benefits of the 2nd method are smaller costs of undergrowth removal and bigger output of solid biofuel. Ponsse Fox harvester demonstrated sufficient work quality and productivity in the trials; however, it would be wise to use heavier harvesters or caterpillar excavator based harvesters in ditch cleaning. Using the 2nd method, a harvester can extract about 227 ha of ditches (23,000 m3 ) annually.

The aim of the study is to ascertain how different compositions of stand species affect the work of the harvester in commercial thinning under Latvia’s conditions. The data of the harvester – time-tracking files (*.drf) have been used as a basis for the study, where productivity is expressed as the prepared amount of round timber in cubic meters in a unit of time – an hour (m**3 hE-1). The data were collected from 100 commercial thinning areas which were divided into three types depending on the composition of the species: pure pine stands, pure spruce stands and deciduous tree mixed stands (mixed with coniferous trees). All the data for the study were collected in the forests managed by JSC ‘Latvia`s State Forests’. By summarizing the data, it has been established that in pure pine stands the average volume of the stem to be removed is 0.092 m**3, in mixed stands – 0.085 m**3 and in pure spruce stands - 0.068 m**3. The research demonstrates that the harvester showed its highest productivity while working in pure pine stands – 3.96 m**3 hE-1, the second best result was achieved in the mixed stands – 3.67 m**3 hE-1, but the lowest rate was demonstrated in pure spruce stands – 3.09 m**3 hE-1. Significant differences were observed in the productivity of the harvester between pure pine and pure spruce stands. Comparing the calculations of standard deviations in the harvester productivity, it can be seen that they are the biggest in mixed stands, while the lowest rate is demonstrated in pure spruce stands.

The study aims to find productivity of biofuel production in pre-commercial thinning, depending on the structure of assortments and to identify factors that influence the cost of mechanized tending of young stands. Five work methods were compared in the study, starting from standard thinning (production of sawn timber, pulpwood and firewood) with no use of accumulating device and finalizing with the biofuel method – no other assortments except biofuel are produced and the most intense use of accumulating device is considered. Accumulating device is not used for production of standard round-wood assortments. The experiments were implemented in February – March, 2013. The material produced in the study was used by ‘Graanul Pellets’ company to evaluate possibilities to use timber extracted in pre-commercial thinning of coniferous stands in production of premium class pellets. The average productivity in different stands is statistically different. The study shows that productivity of harvesting is 3.7 … 5.1 m**3 hE-1, which can be increased by more intensive use of accumulation. No difference found between work methods in forwarding trials, but productivity grows with increase of share of firewood. Average loading time 26 min, unloading 3.6 min, average load 6.0 m**3 . Prime-cost calculation shows that harvesting costs depending on the working method is in the range of 22.4 … 26.5 EUR mE-3. Comparison of potential expenses and incomes demonstrates that economically the most efficient is production of traditional assortments (sawn wood, small size sawn wood, pulp wood and firewood) with an active use of accumulating function.

In the 30ies of the 20th century stump extraction was identified as one of the most prospective technologies of forest sector to secure deliveries of solid biofuel. Now we are returning to the same challenges having the same targets – to secure energy independence and competitiveness of forest sector. MCR 500 is the prototype of combined stump extraction and mounding bucket for caterpillar excavator produced in Latvia by the LSFRI Silava and engineering company Orvi SIA. The device is made for extraction of stumps with diameter up to 50 cm. Additional benefit of the device is its ability to prepare soil for the forest regeneration by making mounds. The article summarizes results of productivity trials of stump extraction using the MCR 500 head and following forwarding of the material. Data from earlier studies are used to characterize comminution and road transport of stumps and chips. In total 3.5 ha were extracted during the studies. A harvested amount of stumps was estimated using biomass equations. It will be updated in further comminution studies. Average stock of extractable biomass (stumps and coarse roots) on the experimental sites was 28 tons ha-1. Productivity of stump extraction was 2.4...3.4 tons per efficient hour. Consumption of efficient time for scarification of soil was 3.4...4.3 hours per ha. Forwarding took 30 min per load (2.6 tons per efficient working hour). Prime cost of chips according to biomass equations is 9.78 Ls LV mE-3, according to expert judgement based harvested stock is 6.38 Ls LV mE-3.

Tracked forwarders is one of the solutions for the forest soils with poor bearing capacity providing ability to use well-known technology for reasonable cost to improve accessibility of forest resources. Tracked forwarders are not common in forest nowadays and only a few models are produced serially. The ProSilva F2/2 is a new middle-class forwarder, whose frontal tracks are replaced with big tires, ensuring large contact surface, increased mobility of the machine and significantly reduced mass without loosing the load capacity (15 tonnes). The aim of the study was to evaluate productivity, soil impact and cost of the roundwood forwarding using the ProSilva F2/2. The study was conducted in Finland. Productivity (time per crane cycle, split into operations and loads), load size, depth of ruts and soil compaction were estimated during the study. According to the study results, the average productivity is 16 m**3 per hour (driving distance to a landing site 200 m, driving speed 2.8 km hE-1, average load 9.7 m**3). The productivity can be significantly increased by more efficient utilization of the load capacity and by using gripper with the tilt function. The length of ruts on peat soil (56 m haE-1) does not exceed the permitted threshold values in Latvia. The compaction of soil took place mainly in topsoil, no changes in soil density were observed in deeper soil layers. The prime cost of forwarding according to the preliminary estimates is 2.5 € mE-3 if the annual production is at least 62000 m**3. Utilization rate is important to keep forwarding cost low.

Thinning of young forest stands is a contribution to the future of the stand development. Our study focuses on damage of the remaining trees and soil. Now it is common to see thinning of young stands with heavy forest machines, but most of these operations take place in commercial thinning. This study is focused on precommercial thinning to evaluate different mechanized thinning methods in relation to the damage done to the remaining trees and soil in deciduous tree stands. Data were collected in four stands where the average diameter of trees at breast height was 6.2 cm, the height of average trees - 9.5 m, but number of trees per hectare was more than 2900. The stands regenerate naturally. Damage was evaluated separately after harvester and forwarder operations. The study proves that forwarding makes much less damage to the remaining trees than harvesting. According to the study data, the traditional method results in the largest number of damaged trees, because operators need to cut all trees closer than 1.5 m from the target tree. Both schematic thinning methods result in significantly less damage. A statistically significant difference (p is less than 0.001) was found in a proportion of damaged remaining trees between all of the applied working methods. The smallest amount of damage is associated with complex symmetrical thinning method. The most damage appears during harvesting. The aim of this study was to compare three working methods of biofuel production in pre-commercial thinning using harvester John Deere 1070D with accumulating felling head Bracke C16.b in grey alder (Alnus incana) pure stand.