A study using the assigned Complete Block Design with three replications was carried out at Hobigong, Bangladesh from January to August 2021 to investigate the impact of different combinations of organic and inorganic fertilizers on the growth and production of bitter gourd. The experiment employed five different combinations of organic and inorganic fertilizers, which are listed below: T1: 4 kg of organic fertilizer per plant, T2: 4 kg of organic fertilizer + 2 liters of cow urine + 2 liters of bc (biochar), T3: 2 liters of liquid bc (biochar)) + NPK (44 g urea + 43 g TSP (Triple Super Phosphate) + 77 g MoP (Muriate of Potash), T4: NPK (44 g urea + 43 g TSP + 77 g MoP), and T5: 4 kg of organic fertilizer + 2 liters of bc+ NPK (44 g urea + 43 g TSP + 77 g MoP) on three distinct soils in the villages of Kalonjhora, Madhabpur, and Jointure. The growth and yield of bitter gourd at different study locations were significantly affected by the application of both organic and inorganic fertilizers, according to the results. The results showed that the use of both organic and inorganic fertilizers had a significant effect on the development and yield of bitter gourd at the different study sites. Maximum germination rate (90%), at 45 DAS (days after sowing), longest plant (173.28 cm) at 100 DAS, maximum number, longest and heaviest fruit (6.30 number of fruits per plant, 15.51 cm and 82.50 g, respectively) were obtained from crops grown in Jointer village that were applied with 4 kg organic fertilizer + 2 liters bc + NPK (44 g urea + 43 g TSP + 77 g MOP). According to the previously described research, most development and yield characteristics of bitter gourd are improved when grown in a mixture treated with 4 kg organic fertilizer + 2 liters bc + NPK (44 g urea) + 43 g of TSP + 77 g of MoP.

The present study investigated the effect of starvation periods on growth performance, feed cost, and water quality in common carp (Cyprinus carpio). Two different starvation methods were implemented, with an average weight of 120.69±3.47g over a 45-day trial. Group D1 was subjected to a 1-day fasting/2-day feeding regimen, whereas Group D2 adopted a 2-day fasting/1-day feeding regimen. The control group (C) was fed twice daily to satiation. At the end of the trial, the average weight of the fish was 200.88±14.62g in the control group, 189.11±21.05g in Group D1, and 130.04±10.49g in Group D2. The specific growth rates were 1.13±0.08% (C), 1.00±0.05% (D1), and 0.17±0.06% (D2), respectively. Feed conversion ratios were 1.81±0.01 (C), 1.32±0.02 (D1), and 4.43±0.05 (D2), respectively. There were significant differences between the control group and Groups D1 and D2 in terms of dissolved oxygen (mg/L) and pH values of the water. Group D2 yielded lower feed costs due to reduced feed usage. The average weight gain analysis showed that the unit feed cost of Group D2 was 3.4-fold higher than that of Group D1 and 2.5-fold higher than that of the control group. The application of starvation periods in feeding common carp had significant effects on the growth, feed utilization, water quality, and feed cost.

Bitkisel hormon olarak da kabul edilen salisilik asit, fenolik maddelerin bir grubunu oluşturmakta, bitkilerde metabolik ve fizyolojik gibi birçok tepkiyi oluşturan ve dolayısıyla bitki büyüme ve gelişmesini etkileyen bir bitki büyüme düzenleyicisidir. Bu çalışma, ayçiçeği çeşitlerinin fizyolojik ve biyokimyasal özellikleri üzerine salisilik asit uygulamasının etkilerinin belirlenmesi amacıyla yürütülmüştür. Tesadüf Parselleri Deneme Desenine göre 3 tekrarlamalı olarak iklim odası koşullarında kurulmuştur. Çalışmada materyal olarak 11-TR-077, Deray ve P-64-LC-108 olmak üzere 3 ayçiçeği çeşidi ve salisilik asidin 5 dozu (kontrol, 0,5, 1, 1,5 ve 2 mM) kullanılmıştır. Sonuçlar incelendiğinde ele alınan çeşitlerde salisilik asit uygulamasının spad, bitki boyu, yaprak sayısı, kök çapı, bitki yaş ağırlık ve bitki kuru ağırlık oranları yönünden Deray çeşidinde olumlu etki ettiği incelenmiştir.

This study aimed to investigate the volatile organic compounds (VOCs) variations during the spoilage of palm wine stored at ambient temperature and identify potential shelf-life markers. Palm wine collected from local tappers and resellers were stored at ambient temperature (28-30°C) for 96 h. At an interval of 24 h, VOCs variations were investigated using Solid phase Microextraction-Gas Chromatography-Mass Spectroscopy (SPME-GC/MS) method. Changes in sensory quality and potential flavour contributors were also explored. The sensory rejection time was found at 24 h and 48 h of storage for palm wines collected from the tappers and resellers, respectively. The first attribute to be spoiled was taste followed by odour and appearance. A total of 23 VOCs distributed in six chemical families were identified. Alteration of palm wine sample is characterised by an increase in concentration of alcohol (isoamyl alcohol, isobutanol and 1-octanol), aceti acid and acetoin, and a decrease in ester concentration (ethyl acetate and ethyl hexanoate). In the view to fight against the short shelf-life and develop new preservation methods, these compounds can be used as markers of spoiled palm wine.

Recycling plant residues through various processes is essential for addressing waste issues in our country, because it contributes to the protection of the environment and ecosystems. Composting is one of the most important recycling methods for plant residues. Composts are not only natural, but they also enhance soil fertility and exhibit fungitoxic properties on the mycelial and spore germination of fungi. This study aimed to isolate bacterial bioagents from compost derived from various agricultural and household organic wastes, and to assess their antagonistic potential against important plant pathogens Botrytis cinerea and Sclerotinia sclerotiorum under in vitro conditions. A total of eight bacterial isolates were obtained, identified as belonging to Bacillus spp. Dual culture tests were used to evaluate the potential of these bacterial candidates to inhibit the mycelial growth of phytopathogenic fungi. In vitro trials revealed that six bacterial isolates exhibited varying degrees of antagonistic effects (23.3%- 63.3%) on the mycelial growth of B. cinerea. Among the tested bacteria, two isolates were effective against S. sclerotiorum, demonstrating antifungal activity ranging from 80% to 83.3%. The results indicate that composts provide a favorable environment for microorganisms with antagonistic potential, suggesting that these cultivation environments could play a significant role in the biological control of fungal pathogens in agriculture. In conclusion, this study contributes to the development of sustainable agricultural practices by ensuring a more efficient utilization of organic waste.

This study was conducted as both petri dishes and pot experiments on four different salt-sensitive cotton genotypes (Laser, May 505, May 455 and Selin) in order to investigate the role of exogenous salicylic acid applications in reducing the effects of salt stress. Six saline treatments; 0, 30, 60, 90, 120 mM NaCl were used. Each group divided into three sub-groups (hydo-primed control, 0.5 mM and 1.0 mM SA) on the basis of seed priming treatments. They were applied in three replications according to the randomized block design. In all genotypes, 90 mM and 120 mM salt stress negatively affected germination and seedling development. In salt stress up to 60 mM, it was recommended to May 505 and Selin genotypes with 0.5 mM salicylic acid pre-application to the seeds.

Insects, the most diverse group of animals, are known to benefit society for a sustainable future. By focusing on the use of natural enemies of pests, including parasitoids and predators, the need for biological pest control for the conservation of agricultural crops has been emphasized. Parasites are organisms that live in the body of another organism and feed on it without killing it, while predators hunt, kill and eat their prey. Parasitoids, on the other hand, live in or on another organism and feed on it, ultimately killing the host. Our study highlights the use of parasitoids to control pests in agriculture and describes the parasitoid lifestyle as an evolutionary transition between parasitism and predation. It also notes that parasitoid larvae typically require only one host to complete their development and can be used to control a wide range of pests. The aim of this study was to determine the origin of the parasitic life form of order Hymenpotera, the mechanisms revealed by the parasitic life form, the importance of life strategies, the types of parasitism and to evaluate the important insect groups belonging to the order Hymenoptera used in biological control.

Fish industry has significant importance all over the world because red meat is not enough to complete the protein requirements of growing population. Therefore, focus is now on those fish species production rate which are more suitable. In this study we focused on common carp which has important commercial value due to its size and tasty meat. Common carp is a fresh water fish and mostly found in rivers, ponds, dams and lakes. It is special due to its ability of adjustment in any aquatic habitat and sometimes beneficial also for other aquatic animals by releasing nutrients in habitat. Türkiye is a rich country in terms of rivers, dams and lakes. In this research, we described famous water reservoirs in Türkiye and in which regions higher amount of carp fish produced. It was focused on Central Anatolian Region of Türkiye which has large amount of water reservoirs. Geography Information System (GIS) based mapping and spatial analysis was used in this study to check the production rate of carp in Central Anatolian Region of Türkiye for long period from year 2000 to 2019. It was concluded from this study that highest average production rate of carp is obtained in Konya province (total: 11919,2 tons/2000-2019; average: 596 tons/20 year) which is west part of Anatolian region and lowest average production rate is found in the Niğde province (total: 163,5 tons/2000-2019; average: 8,2 tons/20 year) which is south part of the Central Anatolian Region.

Turkey has vast agricultural lands and diverse climatic conditions, and different plant species can be cultivated. Especially, Konya province, located in the Central Anatolia Region, is an important agricultural centre in Turkey. Konya province, which has a polyculture production pattern, stands out in the production of medicinal and aromatic plants due to its favourable climatic conditions and soil structure. In Turkey, 26.33% of cumin, which is among the medicinal and aromatic plants, is produced in Konya province. This study aims to determine the factors affecting cumin production. For this purpose, 65 cumin producers determined by proportional sampling method were interviewed. The data obtained through these interviews were analysed by using the Analytic Hierarchy Process (AHP) method to determine the weights of the criteria affecting the cumin production decision of the agricultural enterprises. In the process of determining the criteria influencing the cumin production decision, the opinions of subject experts working in universities, public institutions and organizations and producers were taken. Among the criteria determined as yield, price, labour requirement, water requirement, ease of marketing, mechanisation, input costs, cultivation knowledge, soil structure and subsidies, the most important criterion was found to be price with 28.11%. Price criterion is followed by input cost 22.57%, water requirement 12.13%,  yield 8.71%, cultivation knowledge 8.43%, subsidies 6.82%, ease of marketing 4.74%, soil structure 3.63%, mechanisation 2.54% and labour requirement 2.25%. It is thought that the solution of the mechanisation problem will make a significant contribution to cumin production as it will reduce the need for labour force.

Bu çalışmada çekirdekli ve çekirdeksiz nar taneleri (Punica granatum L.) ince tabaka halinde farklı sürelerde ultrason ön işlemi (US) uygulandıktan sonra 70 °C’de 1,3 m/s hava hızında kurutulmuştur. Nar tanelerinin kuruma kinetiğinin incelenmesi amacıyla literatürde çok kullanılan ancak karmaşık ve verilerin dönüştürülmesini gerektiren çok parametreli modeller yerine en çok iki parametreli modeller kullanılmıştır. Bu modeller Lewis (Newton), Page, Modifiye Page I, Weibull, Weibull I ve Modifiye Çift Terimli III modelleridir. Kurutma işlemlerini en iyi açıklayan modelin seçilmesi amacıyla hata kareleri ortalamasının kare kökü (RMSE) ve belirleme katsayısı (R2) değerleri incelenmiştir. Elde edilen sonuçlara göre çekirdekli nar tanelerinin kurutulmasını tüm işlem koşullarında en iyi Page modelinin açıkladığı belirlenmiştir. Çekirdeksiz nar tanelerinde ön işlemsiz ve 10 dakika US ön işlemli nar tanelerinin kurutulmasını en iyi açıklayan modelin Page modeli, 20 ve 30 dakika US ön işlemli nar tanelerinin kurutulmasını en iyi açıklayan modelin ise Weibull modeli olduğu belirlenmiştir. Bununla birlikte, kurutma öncesinde uygulanan farklı sürelerdeki US ön işlemlerinin çekirdekli ve çekirdeksiz nar tanelerinin kuruma sürelerini önemli ölçüde azalttığı belirlenmiştir.