This research was conducted to overcome the problem of slow and erratic emergence in okra and to find out the effects of priming on germination, growth performance and yield in okra at Research Field of Nepal Polytechnic Institute (NPI) Bharatpur-11, Chitwan, Nepal (April-July, 2019). Arka Anamika variety was used for experiment. The experiment was laid out in Randomize Complete Block Design with 5 treatments and 4 replications, i.e. T1 (hormonal priming with IBA), T2 (hydro priming with fresh tap water), T3 (halo priming with NaCl), T4 (chemo priming with liquid urea) and T5 (un-primed seeds). Field experiment results showed that priming proved effective in improving germination percent except the chemo priming, reducing the mean germination time (MGT), improving the growth parameters (plant height, number of branches, plant canopy and number of leaves) and improving yield contributing characters like fruit length, fruit diameter as compared to un-primed seeds. The highest and lowest germination percentages were found in hydro priming and hormonal priming respectively while better growth performance in hormonal and chemo priming. Similarly, hormonal and hydro priming resulted in higher yield. Hence, it is suggested that seed priming is important to improve the overall germination, growth performance and yield in okra.

In agricultural production, one of the limiting factors on plant growth and yield is soil salinity. The plant growth regulators are of considerable importance in alleviating the negative effect of salt stress. The study was carried out to determine the effects of salicylic (SA) and gibberellic acid (GA3) on the growth and some physiological characters in canola (Brassica napus L.) under salinity conditions in greenhouse. For this purpose, a factorial experiment set up as completely randomized design was conducted with three levels of SA (0, 0.5 and 1 mM) and GA3 (0, 50 and 100 mg l-1) and four levels of NaCl (0, 50, 100 and 150 mM) with three replications. In the study, leaf area, plant height, electrolyte leakage, chlorophyll content and the loss of leaf turgor were investigated. Salt treatments reduced significantly all of the considered parameters, compared with the control. Salinity caused a significant reduction of 63 and 67%in plant height and leaf area, respectively, as compared to the control plants. On the contrary, electrolyte leakage was markedly increased (six-fold) with increasing NaCl levels. Gibberellic acid increased significantly plant height and reduced the loss of leaf turgor, without a significant improve in other parameters. The results indicated that application of SA and GA3 to salinity stressed plants did not significantly affect canola vegetative growth. However, GA3 caused a partial decrease in the adverse effect of salinity.

The red flour beetle is a very important primary insect pest of wheat worldwide. The experiments were performed to check the virulence of Beauveria bassiana and Isaria fumosorosea by insect dipping method on the adults and 2nd instar of Tribolium castaneum. Conidia were taken from 15 days old fungi and subsequently four concentrations i.e., 2×108, 3×108, 4×108 and 5×108 spores/ml of both fungi were prepared in 0.05% Tween 80 solution. Minimum 12.5% and maximum 32.5% mortality of adult insects was recorded on 7th day after the treatment at 2×108 and 5×108 spores/ml concentrations of B. bassiana, respectively while on larval stages, minimum 2.5% on 5th day and maximum 80.0% mortality was observed on 7th day post treatment of B. bassiana, respectively. On the other side, minimum 7.5 and maximum 22.5 mortality percentage was noted on 7th day post application of I. fumosorosea, respectively while on immatures minimum 5% on 6th day and highest 70% mortality was noted on 7th day post infection with 2×108 and 5×108 spores/ml of I. fumosorosea, correspondingly. This study showed the effectiveness of insect pathogenic fungi against the important stored grain insect pest and proved to be a positive management strategy.

In this study, the presence and residue levels of aflatoxin M1 (AFM1) were investigated in traditionally produced cube cheeses in Sivas and its region. For this purpose, 90 pieces of cube cheese were used as a material. Cheese samples were collected periodically in November and December 2016 from central sales location and surrounding villages. ELISA technique was applied in aflatoxin analyses. According to the analysis results, AFM1 was detected in total of the cube cheeses. The lowest level of AFM1 was found to be 2.16 ng/kg, the highest was 53.94 ng/kg and the mean was 6.36±0.87 ng/kg. AFM1 level vas determined one cheese sample above to the limit set by European Union.

Milking parlours are concrete constructions where milk is milked from cows, stored and transferred. These create the last stage of the work flow chart in dairy cattle farms. Quality of milk is important in the production of milk and dairy products owing to the fact that milk is one of the basic food requirements of people. The quality of milk depends on the genetic conditions of the cows as well as their well-being, the appropriate level of care and environmental conditions and milk being obtained in a clean environment which isolated from negative external factors. Milking parlours should be planned under a separate roof from the dairy cattle barns in order to ensure hygiene conditions, facilitate the work flow and reduce the negative effects on the health of cows and people. However, not including very large enterprises, it is planned as an add-on to other items under the same roof with the dairy cattle barn due to reasons such as decreasing the cost in the small, medium and majority of large-scale enterprises and the society does not care about hygiene conditions. Production in this wise is not appropriate to ensure the requirements about hygiene conditions in the production of milk and dairy products, since the milking parlours are directly under the environmental conditions of the barn. In this paper, it is explained the criteria to be considered in the process to plan and design milking parlour and it is aimed the generalization of milking parlour be built as a construction separate from the dairy barn, with an exemplary milking parlour project with 2×12 fishbone milking system.

This study analyses implication of COVID- 19 pandemics in the agricultural sector of Turkey. In the study taken measures in the sector are considered. The focus of the paper is twofold. The first objective is to take a glance at COVID 19, how it started, and how affected sectors or businesses. This aim supported by the literature review which is getting a shape recently, on the grounds founded papers were limited. It can be seen that generally all countries suffered from the same problems apart from the countries sectors have problems in common. Lastly, we tried to focus on the agricultural sector especially in Turkey and we presented precautions taken agricultural sector in Turkey. In addition to this to the objective, we tried to synthesize all our findings and present suggestions in case this process prolonged. The originality of the paper comes from it is the first study that draws a general outline for Turkey’s agricultural sector considering the pandemic.

The aim of this study is to determine the entrepreneurship potential of women, define the factors that lead rural women to become entrepreneurs in local markets and reveal the problems faced by rural women during their entrepreneurship activities. Alaçam ve Bafra districts of Samsun province were purposefully selected as research area where women entrepreneurs concentrated and the primary data were collected with face to face interviews with all women (total of 75) in the markets. According to the findings; women have stated that they started their career in the marketplace through the direction of their own decisions (32.0%). When the thoughts of doing business other than their profession were examined; they wanted to open a garment workplace (16.6%). 43.0% of marketers stated that they were satisfied with their profession and 54.0% of them perceived the market as permanent profession due to being a profitable business and raising their revenues. Three major obstacles for women entrepreneurs were defined as; limited or inadequate funds, professional insufficiency due to low formal educational level and lack of experience, respectively. Private loans can be provided to women entrepreneurs thus; it can increase their funds. Institutions and organizations, which provide active support, may also increase trainings devoted to women who have lack of experience.

Known as the world’s most healthy and natural source of vegetable oil, the history of olives dates back to 10,000 years ago. The homeland of olives, a member of the Oleacea family, is Upper Mesopotamia and Southern Asia, including Southeastern Anatolia and Syria. Olives, BC It started to be cultivated on the eastern shores of the Mediterranean in the year 3000 and is one of the first fruit species cultivated in the Mediterranean region. In this respect, olive has an important place in the economy, nutrition and culture of Mediterranean countries. Currently, in most olive growing countries, olive, leafy stem or cuttings are rooted or by propagating stem shoots from seed or clonal stem. However, the so-called table olives are very difficult or completely impossible to root. The olives, which are very difficult to root, should be supported with biotechnological approaches such as micropropagation method in order to increase the product productivity. So far, many fruit species have been propagated in vitro using tissue culture methods and at the same time, some olive varieties have been successfully propagated by micro-propagation method. It made in tissue culture in the world and Turkey Olives have been compiled resources to work for the researchers in this study.

Et ürünleri günlük beslenmede büyük öneme sahiptir. Tüketici beğenisini et ürünlerinin fiziksel ve fonksiyonel özellikleri sağlamaktadır. Bu özelliklerinin yanı sıra insan sağlığına olan etkileri bakımından da bir değerlendirme yapılmaktadır. Bu çalışmada et ürünlerinin formülasyonlarının fonksiyonel özelliklere göre düzenlenmesi, işleme, depolama ve tüketim modifikasyonları ve fonksiyonel gıda olarak tanımlanan et ürünleri ele alınmıştır. Et ve et ürünleri; yağ asitleri, mineraller, diyet lifi, antioksidanlar ve biyoaktif peptitler gibi önemli besinleri diyete vermek için büyük potansiyele sahiptir. Bununla birlikte, bu bileşenlerle başarılı ürünler üretmek, stabilitelerini arttırmak ve lezzetli olmaları için yeni teknolojiler geliştirilmektedir. Kullanılan bileşenlerin doğal olması, yapılarındaki mevcut sağlığa faydalı bileşenlerin de diyet ile alınmasını sağlaması bakımından önem taşımaktadır. Gıda ürünlerinin sindirim ile metabolizmaya katılması sebebiyle yapılan in vitro çalışmalar da doğal bileşenler ile geliştirilmiş et ürünleri için önemli bir değerlendirme kriteridir.

In wheat cultivation, sowing frequency is one of the crucial agronomic applications affecting grain yield. The aim of the research was to determine the effects of application of different sowing frequency (350, 500, 650 and 800 seeds m-2) for bread wheat cultivars (Alpu 01, Atay 85, Bezostaja 1, Harmankaya 99, Sönmez 01 and Sultan 95) on yield and yield components. Trials was carried out in Transitional Zone Agricultural Research Institute Eskişehir central campus fields during at 2012-13 and 2013-14 crop seasons in irrigated and rain fed conditions with 3 replications in randomized complete blocks design. In this study, the factors such as grain yield, number of spike per square meter, spike length, number of grain per spike, weight of grain per spike and harvest index were examined in terms of sowing frequency applications and cultivars in both conditions. As a result, the maximum grain yield was obtained from 650 seeds m-2 in rainfed conditions and this value was obtained from the application 500 seeds m-2 in irrigated conditions. Harmankaya_99 variety reached the highest values in terms of grain yield in both conditions and followed this by Alpu01 variety. In both conditions spike length, number of grain per spike, weight of grain per spike and harvest index parameters decreased inversely with increasing sowing frequency, while the number of spike number per square meter increased in direct proportion to increased sowing frequency. In rainfed conditions while there was a positive correlation between the grain yield with number of spike per square meter and harvest index, there was negative correlation among grain yield with spike length, number of grain per spike and weight of grain per spike. There was found significant positive correlation between grain yield with spike length and harvest index in irrigated conditions.