ABSTRACT Mango (Mangifera indica L.) is a tropical fruit of great importance in the world. However, fruit postharvest losses are caused by anthracnose, a disease caused mainly by phytopathogenic fungi from the Colletotrichum genus. Thus, this work aimed to study morphology, genetic similarity, and pathogenicity of Colletotrichum spp. isolates from mango in Rio Grande do Norte state, Brazil. Morphological evaluation of 28 isolates, based on colony color, size of conidia and appressoria, and growth rate, showed that the isolates belong to the C. gloeosporioides species. It was later confirmed with species-specific oligonucleotides. Also, combined evaluation with RAPD (Random Amplified Polymorphic DNA) and ISSR (Inter Simple Sequence Repeats) showed a genetic similarity of 0.23 between Isolates 12 and 21, and 0.71 between Isolates 2 and 4, an indication of high variability among isolates, with dissimilarity over 75%. Moreover, the dendrogram generated by the UPGMA method indicated that the isolates were arranged in eight groups, which did not correlate with the collection site. Based on pathogenicity, although most isolates showed low virulence for Tommy Atkins cultivar, some of them proved to be highly aggressive (Isolates 9, 15, 20, 21, 24, 26, and 27). Also, pathogenicity did not correlate with clusters. In conclusion, the results revealed high genetic and pathogenic variability in C. gloeosporioides isolated from mango cultivars in one of the main exporting regions in Brazil.

ABSTRACT Cowpea [Vigna unguiculata (L.) Walp.] is an important socioeconomic crop in Brazil, mainly in the Northeast and more recently in the Midwest of Brazil. Charcoal rot caused by Macrophomina phaseolina (Tassi) Goid, is an important disease in semiarid regions, where edaphoclimatic conditions are favorable to the development of disease. The aim of this study was to evaluate the response of 100 cowpea lines to two isolates of M. phaseolina. The experiments were conducted in a completely randomized design, with five replications (two plants per pot). The main variables evaluated were lesion length and relative growth compared to control (RGCC). Among the evaluated accessions, 15% of the lines were resistant to isolate 59 and 11% of the lines were resistant to isolate CMM 2106 of M. phaseolina. Therefore, these accessions can be used as a source of resistance to M. phaseolina by farmers directly as new cultivars or in future hybridizations of cowpea genetic breeding programs.

ABSTRACT Fusarium wilt, caused by the fungus Fusarium oxysporum f. sp. passiflorae (Fop) is the main fungal disease in passion fruit crops. Chlamydospores, which are structures of resistance produced by Fop, allow the fungus survival in the soil for several years and have saprophytic activity. Biofumigation with incorporation of cabbage and bitter cassava has been a viable alternative, among management methods, for the control of soil pathogens. The objective of this work was to evaluate the effect of different plant debris (plant residues) on survival of Fop under laboratory conditions. In vitro tests were carried out with incorporation of leaves of yellow passion fruit, cabbage, bitter cassava, and sweet cassava plants into substrates infested with different Fop isolates. Mycelial growth and chlamydospore production and germination were evaluated. The incorporation of cabbage and bitter cassava debris had a fungistatic effect on Fop, with decreases in mycelial growth and chlamydospore production. The incorporation of cabbage into the substrate totally inhibited the chlamydospore germination in 78% of the evaluated isolates and decreased the germination percentage in the others.

ABSTRACT Passion fruit production has become an attractive activity due to its social and economic benefits, given the rapid economic return and well-distributed income over most of the year. From this perspective, this study aimed to evaluate the technical and economic indicators of yellow passion fruit cultivation by combining irrigation, protected cultivation, and pollination. The experimental design was in randomized blocks set up in split plots (2 x 2 x 2), with eight treatments and four replicates containing four plants per experimental unit. The protected environment was installed on the upper part of each trellis and consisted of 100 m transparent plastic film as cover material. Irrigation was performed using a micro-sprinkler system, and pollination was either manual or natural (entomophilous). The following parameters were evaluated: commercial yield - estimated for one hectare considering the mass of marketable fruits produced in the plot (30 m2); production cost - capital depreciation, input prices, and labor used in cultivation; economic indicators - profitability index, family labor remuneration, profitability, net income, benefit/cost ratio, and fixed, variable, and total costs. The results show that artificial pollination increased the yield and provided a 41% higher profitability rate than natural pollination; supplemental irrigation, compared to rainfed cultivation, has no positive effects on profitability indices; protected cultivation increases the total cost and does not 0increase the yield; organic passion fruit production provides profitability indices ranging from 60% to 70%.

ABSTRACT The use of resistant cultivars is an efficient and recommended method for the management of leafminers, which are the main phytosanitary problem in melons. The objectives of this study were to identify the sources of resistance to the leafminer in yellow melon accessions and to determine the resistance inheritance in acession AM-RT. Two field experiments were conducted in the municipalities of Baraúna, RN and Icapuí, CE, Brazil, to identify the sources of resistance. The design adopted was completely randomized blocks with 22 treatments and four replications. In this evaluation, the number of mines per leaf was quantified. The heterogeneity of the studied materials allowed for the identification of the accessions AM-RT and AM-TM as sources of resistance, considering that they revealed zero mines in the two evaluation environments. The accession AM-RT was selected and used to obtain the S1 population (by self-fertilization), S1:2 population derived from S1, and crossing between AM-RT and ‘Goldex’, which were evaluated in a third laboratory trial to determine the genetic control of resistance in that material. By the segregation pattern of the populations S1, S1:2, and the crossing (AM-RT and ‘Goldex’) and the estimation of the chi-squared (χ2) values, which were 1.33, 3.14, and 0.36, respectively, it was determined that the inheritance of resistance was controlled by only one gene with complete dominance. Therefore, in this study, two sources of resistance to the leafminer were identified, and resistance was conditioned by a gene with complete dominance in the accession ‘AM-RT’.

ABSTRACT Image analysis combined with machine learning models can be an excellent tool for classification of fava (Phaseolus lunatus L.) genotypes and is a low-cost system. Fava is grown by family farmers, mainly, in the Northeast and South regions of Brazil, presenting economic and social importance. Evaluations to gather information on qualitative and quantitative characters of seeds enable the description and distinction of genotypes, allowing the evaluation of variability of plant species, which is essential in breeding programs. The use of image analysis is a fast and economic tool for obtaining large quantity of information. Machine learning techniques have been developed and implemented in the agricultural sector due to technological advances and increasing use of artificial intelligence, which enables the automatization of several processes. In this context, the objective of this work was to evaluate different machine learning models to classify fava genotypes, using data obtained through image analysis. Images of fava seeds were captured using a table scanner (HP Scanjet 2004), set to true color mode, arranged upside down inside of an aluminum box fully closed during the capture of the images for an adequate illumination and prevention of environmental noises. The K-Nearest Neighbor, Naive Bayes, Linear Discriminant Analysis, Support Vector Machine, Gradient Boosting, Bootstrap Aggregating, Classification and Regression Trees, Random Forest, and C50 models were used for the study. Linear Discriminant Analysis was the model that presented the highest efficiency for classifying the genotypes, with an accuracy of 90%.

ABSTRACT - Lima bean (Phaseolus lunatus L.) develops at an optimal temperature in the range of 20-30°C, temperatures above 30-35°C compromise the photosynthetic efficiency of the crop. Considering the importance of lima bean cultivation, the objective of this study was to carry out a morphoagronomic and phenological characterization of 46 lima bean accessions tolerant to high temperatures from the core collection of lima bean at the Universidade Federal do Piauí. The experiment was conducted from February to July 2021 in a completely randomized block design with four replications, where the plot consisted of a pot with two plants. Genotype characterization was performed based on 20 morphoagronomic and phenological descriptors of lima bean. Based on Pearson's correlation, the number of emitted and aborted flowers had a greater genetic correlation with the total number of seeds and pods produced. Pod length and width were positively correlated with seed thickness, length, and width. Five groups were formed based on UPGMA grouping. It was observed that the UFPI-922 and UFPI-945 accessions had a higher performance under high-temperature conditions in relation to the number of flowers and pods emitted, as well as lower values for the number of aborted pods. The accessions UFPI-1037, UFPI-876, UFPI-1036, UFPI-1028, UFPI-1052, UFPI-1064, UFPI-1038, and UFPI-1062 are promising for precocity, productivity, emission of flowers and pods formed, and can be used in breeding programs.

ABSTRACT The objective of this work was to verify the contribution of seed inoculation with the bacterium Azospirillum brasilense to promote growth on yield components in wheat crop. For this, experiments were carried out in different locations (Santa Maria and Cruz Alta, RS, Brazil), sowing times (June and July) and years of cultivation (2013 and 2014). A randomized block design with three replications was used. The treatments were composed by the combination of ten cultivars, three nitrogen managements and two types of inoculation (10 x 3 x 2). Inoculation was carried out with liquid inoculant in the seeds. The components of grain yield were evaluated. The average number of tillers per plant was influenced by seed inoculation (1.63 and 1.72) when uninoculated and inoculated, respectively. On the other hand, the hectoliter mass responded inversely, reducing to 75.7 kg hL-1. Inoculation with A. brasilense increased the grain mass (1%) and had no positive influence on the variables number of ears and spikelets per ear, grain yield and hectoliter weight.

ABSTRACT The characterization of genetic divergence in common bean cultivars for various traits related to plant architecture and grain yield is unprecedented. This study proposes to determine whether common bean cultivars of different grain types differ for 12 traits of plant architecture and grain yield; examine the correlations between these traits; analyze the genetic divergence of these cultivars; and select superior cultivars for these traits. A total of 22 common bean cultivars with the grains types most produced in Brazil were evaluated in two growing seasons. Plant architecture was analyzed based on 12 traits, and grain yield was determined at maturity. Significant genotype and genotype × environment interaction effects were obtained, indicating the existence of genetic variability for all evaluated traits. Several plant architecture traits were correlated, but none was highly correlated with grain yield. Firstand second-internode lengths are more important in differentiating common bean cultivars. Principal component and Tocher’s analyses resulted in the formation of four and seven groups of cultivars, respectively. Both methods are efficient in analyzing genetic divergence; however, Tocher's method is more informative. Cultivars BRS Campeiro, SCS 205 - Riqueza, BRS Esteio, IAC Imperador and Guapo Brilhante have a high grain yield potential, but only BRS Campeiro, BRS Esteio and Guapo Brilhante have upright plant architecture.

ABSTRACT The objective of this work was to evaluate the effect of soil application of different boron (B) rates to the soil, with and without application of zinc (Zn), on growth, production components, and grain yield of maize crops grown in a Lithic Quartzipsamment with low B and Zn contents. A randomized block experimental design was used, in a 6×2 factorial arrangement corresponding to six B rates (0, 1, 2, 3, 4, and 5 kg ha-1), with and without application of Zn (2.0 kg ha-1), applied to the soil at sowing, with four replications. Growth variables (stem diameter and plant height), and chlorophyll SPAD index were evaluated at the R1 phenological stage. Maize ear length, one-thousand grain weight, and grain yield, and the B maximum efficiency rate were evaluated at the R6 phenological stage. Application of B and Zn to the soil increases maize grain yield in soils with sandy clay loam texture and low B and Zn contents; the plant absorption and metabolism indicated synergism between these elements when using soil applications of 1.0 kg ha-1 of B combined with 2.0 kg ha-1 of Zn to the planting furrows. The rates with maximum technical efficiency for grain yield were 3.29 and 4.31 kg of B ha-1 in treatments without and with application of Zn, respectively.