In the unlined Tuxbach water transfer tunnel, running between Hintertux (1,500 m asl) and the Schlegeis Reservoir (Austria), a local geothermal anomaly with temperatures up to 14.6 °C exists. These temperatures are around 3 °C higher than expected, considering the tunnel’s shallow depth, together with its surrounding alpine environment and regional heat flow. This is especially noticeable because the temperatures have remained stable since the tunnel’s construction in 1969, although the tunnel is generally cooling the surrounding rock massive. The objective of this investigation is to explain the origin of the anomaly with hydrogeological methods and to evaluate the hydrogeological properties of the gneisses exposed in the tunnel. The anomaly is caused by the high hydraulic conductivity (~2.5∙10⁻⁵ m s⁻¹) within a narrow shear-zone core, part of the Tux Shear Zones in the Ahorn Gneiss Core. The zone triggers fast groundwater transport over 1.5 km from both sides towards the tunnel. One reason is that the morphology provides thicker overburden with growing distance from the tunnel and therefore higher temperatures on the same horizontal level in the directions of the fault plane. The second explanation is that the narrowness of the shear zone permits effective heat transfer similar to a heat exchanger. No hydrothermal water share is recognizable; instead, mainly cold glacial melt water and snow contribute to the section of the anomaly and all other runouts of the tunnel. Factually based results show the disproportionately high contribution of snow and glaciers to the groundwater recharge in this alpine hard-rock aquifer.

Water protection is one of the most important goals in environmental protection. The Clean Water Act in the USA and the Water Framework Directive (WFD) in Europe are the legal frameworks to facilitate the achievement of this goal. The question is raised of whether more information can be extracted from WFD-related groundwater data. To answer it, a methodology has been developed that is easy to use and could be implemented into official practice. A case study is presented in which the groundwater data of a sodic area in Austria (Seewinkel) is assessed. Eighteen parameters in groundwater sampled from 23 wells (1991–2011) were analyzed. With basic statistics, trend-, cluster-, Wilks’ λ and spatial sampling density analysis, local phosphorus and boron phenomena were described, along with the determining role of sulphate, groundwater flow, and the oxygen gradient in the area. As a final step, the spatial sampling density was determined. Regarding the current set of parameters, all the sampling sites are necessary and only in the case of certain parameters (Ca²⁺, Mg²⁺, K⁺, NO₃⁻, pH) could one sampling site be abandoned. The methodology applied brings a new perspective to exploring groundwater data collected according to the requirements of the WFD.

Relict rock glaciers are complex hydrogeological systems that might act as relevant groundwater storages; therefore, the discharge behavior of these alpine landforms needs to be better understood. Hydrogeological and geophysical investigations at a relict rock glacier in the Niedere Tauern Range (Austria) reveal a slow and fast flow component that appear to be related to the heterogeneous structure of the aquifer. A numerical groundwater flow model was used to indicate the influence of important internal structures such as layering, preferential flow paths and aquifer-base topography. Discharge dynamics can be reproduced reasonably by both introducing layers of strongly different hydraulic conductivities or by a network of highly conductive channels within a low-conductivity zone. Moreover, the topography of the aquifer base influences the discharge dynamics, which can be observed particularly in simply structured aquifers. Hydraulic conductivity differences of three orders of magnitude are required to account for the observed discharge behavior: a highly conductive layer and/or channel network controlling the fast and flashy spring responses to recharge events, as opposed to less conductive sediment accumulations sustaining the long-term base flow. The results show that the hydraulic behavior of this relict rock glacier and likely that of others can be adequately represented by two aquifer components. However, the attempt to characterize the two components by inverse modeling results in ambiguity of internal structures when solely discharge data are available.

More than 2,600 relict rock glaciers are known in the Austrian Alps but the knowledge of their hydraulic properties is severely limited. The relict Schöneben Rock Glacier (Niedere Tauern Range, Austria), with an extension of 0.17 km², was investigated based on spring data (2006–2014) and seismic refraction survey. Spring-discharge hydrographs and natural and artificial tracer data suggest a heterogeneous aquifer with a layered internal structure for the relict rock glacier. The discharge behavior exhibits a fast and a delayed flow component. The spring discharge responds to recharge events within a few hours but a mean residence time of several months can also be observed. The internal structure of the rock glacier (up to several tens of meters thick) consists of: an upper blocky layer with a few meters of thickness, which lacks fine-grained sediments; a main middle layer with coarse and finer-grained sediments, allowing for fast flow; and an approximately 10-m-thick basal till layer as the main aquifer body responsible for the base flow. The base-flow component is controlled by (fine) sandy to silty sediments with low hydraulic conductivity and high storage capacity, exhibiting a difference in hydraulic conductivity to the upper layer of about three orders of magnitude. The high storage capacity of relict rock glaciers has an impact on water resources management in alpine catchments and potentially regulates the risk of natural hazards such as floods and related debris flows. Thus, the results highlight the importance of such aquifer systems in alpine catchments.

The determination of space–time variation in groundwater accumulation in Colombia’s Eastern Llanos foreland basin from 2003 to 2014 was done using terrestrial water storage (TWS) anomalies identified in two versions of the Gravity Recovery and Climate Experiment (GRACE) data—from the Global Data Center for Space Research (CSR) at the University of Texas at Austin (USA) and from the Institute of Geodesy at the Graz University of Technology (ITSG, Austria)—and also soil moisture storage (SMS) data from the Global Land Data Assimilation System (GLDAS). These data were compared to changes in groundwater storage obtained using the water-budget equation, calculated based on recorded data from hydrometeorological stations. This study confirmed the viability of using satellite information to understand and monitor temporal variation in groundwater recharge in the study area. Temporal variations in TWS, SMS, and groundwater level were shown to correspond to regional rain and drought periods, which are sensitive to climate phenomena such as El Niño and La Niña. Comparing changes in TWS and groundwater level to changes in infiltration and recharge revealed correlation coefficients of 0.56 and 0.98 with CSR data and 0.71 and 0.86 with ITSG data, respectively.