The development of organic farming is determined by many factors. On the one hand, it is an increase in demand for food produced in this production system, on the other it is a subsidy system for organic farming under the CAP. The purpose of the article is a comparative analysis of the direction of changes in the development of organic farming in Poland and Latvia compared to the EU in the years 2000–2017. Information was analysed on the organic farming i.e. the area of organic crops, the number of certified farms and organic retail sales, based on FIBL data from the years 2000–2017. An analysis of the trend of changes in organic farming in Poland and Latvia indicates that the development of organic farming in both countries has clearly accelerated after their accession to the EU and after covering organic farming by the CAP support system. However, the case of Poland is definitely different from the trend of changes in organic farming in Latvia and in the EU, where both the number of organic farms and their area increased, with the simultaneous development of the organic food market. There are many indications that mistakes were made in the organic farming subsidy system.

The development of organic farming is determined by many factors. On the one hand, it is an increase in demand for food produced in this production system, on the other it is a subsidy system for organic farming under the CAP. The purpose of the article is a comparative analysis of the direction of changes in the development of organic farming in Poland and Latvia compared to the EU in the years 2000-2017. Information was analysed on the organic farming i.e. the area of organic crops, the number of certified farms and organic retail sales, based on FIBL data from the years 2000–2017. An analysis of the trend of changes in organic farming in Poland and Latvia indicates that the development of organic farming in both countries has clearly accelerated after their accession to the EU and after covering organic farming by the CAP support system. However, the case of Poland is definitely different from the trend of changes in organic farming in Latvia and in the EU, where both the number of organic farms and their area increased, with the simultaneous development of the organic food market. There are many indications that mistakes were made in the organic farming subsidy system.

This paper investigates the effect of separated exhaust expansion chamber parameters on pressure oscillations in spark-ignited internal combustion (IC) gasoline engines. It is known that exhaust expansion chambers are becoming increasingly more popular among both – original equipment (OE) and aftermarket equipment (AE) exhaust system manufacturers for performance-oriented motorcycles equipped with mainly single cylinder engines, but the companies are reluctant to reveal any detailed principles of operation of the mentioned expansion chambers. The subject of this research is the type of expansion chamber (separate) as used on performance-oriented motorcycles, particularly its’ effect on exhaust pressure pulsations as different chamber volumes, locations and passage sizes are tested. Time-dependent computational fluid dynamics (CFD) analysis was carried out in Solidworks Flow Simulation environment on a simplified exhaust header pipe model imitating engine operation at full load and steady speed. Honda CRF450R motorcycle engine was used as the example and fully defined using a 1D engine performance calculator software to determine the combustion chamber pressure and exhaust valve lift at any given crankshaft position. Volume flow rate of exhaust gasses at the header pipe inlet was calculated based on engine parameters and operating speed. The average pressure values with respect to physical time were measured and graphed across the header pipe inlet cross-section. Eight different header pipe and exhaust expansion chamber combinations were modelled, tested, and results compared at low, medium and high engine speeds. It was found that the presence of exhaust expansion chamber tends to dampen the amplitude and decrease the frequency of pressure oscillations generated at the opening of the exhaust valve(s). Observations show that the addition of an expansion chamber as per design of performance-oriented motorcycles helps to decrease the negative effect of engine tuning while also dampening the positive effect.

This paper investigates the effect of separated exhaust expansion chamber parameters on pressure oscillations in spark-ignited internal combustion (IC) gasoline engines. It is known that exhaust expansion chambers are becoming increasingly more popular among both – original equipment (OE) and aftermarket equipment (AE) exhaust system manufacturers for performance-oriented motorcycles equipped with mainly single cylinder engines, but the companies are reluctant to reveal any detailed principles of operation of the mentioned expansion chambers. The subject of this research is the type of expansion chamber (separate) as used on performance-oriented motorcycles, particularly its’ effect on exhaust pressure pulsations as different chamber volumes, locations and passage sizes are tested. Time-dependent computational fluid dynamics (CFD) analysis was carried out in Solidworks Flow Simulation environment on a simplified exhaust header pipe model imitating engine operation at full load and steady speed. Honda CRF450R motorcycle engine was used as the example and fully defined using a 1D engine performance calculator software to determine the combustion chamber pressure and exhaust valve lift at any given crankshaft position. Volume flow rate of exhaust gasses at the header pipe inlet was calculated based on engine parameters and operating speed. The average pressure values with respect to physical time were measured and graphed across the header pipe inlet cross-section. Eight different header pipe and exhaust expansion chamber combinations were modelled, tested, and results compared at low, medium and high engine speeds. It was found that the presence of exhaust expansion chamber tends to dampen the amplitude and decrease the frequency of pressure oscillations generated at the opening of the exhaust valve(s). Observations show that the addition of an expansion chamber as per design of performance-oriented motorcycles helps to decrease the negative effect of engine tuning while also dampening the positive effect.

The work presents foundations of the dynamics of the flat-parallel movement of a bridge agricultural unit in a horizontal with the kinematic method of its control (turning the wheels) by changing the position of one of its parts relative to the other. The analysis of assessment of the degree of impact of the scheme and parameters of the investigated agricultural tool upon its controllability and stability of movement is based on the amplitude and phase frequency characteristics. The mathematical models of the movement of the bridge agricultural unit are presented in a differential and an operator form of recording. Based on mathematical models, the calculated amplitude and phase frequency characteristics of the dynamic control system of the control impact, presented as the angular displacement of its half-frames ψ, are constructed for various parameters and operating modes. The constructed mathematical models, amplitude and phase frequency characteristics make it possible to assess the impact of the control parameter of the bridge agricultural unit, as well as its design and other parameters upon the controllability of the movement.

The work presents foundations of the dynamics of the flat-parallel movement of a bridge agricultural unit in a horizontal with the kinematic method of its control (turning the wheels) by changing the position of one of its parts relative to the other. The analysis of assessment of the degree of impact of the scheme and parameters of the investigated agricultural tool upon its controllability and stability of movement is based on the amplitude and phase frequency characteristics. The mathematical models of the movement of the bridge agricultural unit are presented in a differential and an operator form of recording. Based on mathematical models, the calculated amplitude and phase frequency characteristics of the dynamic control system of the control impact, presented as the angular displacement of its half-frames ψ, are constructed for various parameters and operating modes. The constructed mathematical models, amplitude and phase frequency characteristics make it possible to assess the impact of the control parameter of the bridge agricultural unit, as well as its design and other parameters upon the controllability of the movement.

There is a strong correlation between diet and mental health, and malnutrition can contribute to the development of various psycho-neurological diseases. Fatty acid profile plays an important role in the treatment of psycho-neurological diseases; therefore, the aim of the current study was to evaluate fatty acid profile in the diet of patients in three Latvian psycho-neurological hospitals. Latvian psycho-neurological hospitals submitted a detailed one-week menu. The information in the menus was processed using the Fineli program. Each menu identified the composition of fatty acids. The average fat concentration in different hospital menus ranged from 74.8 g to 96.1 g per day, where the concentration of saturated fatty acids ranged from 37.5 g to 47.7 g per day and the unsaturated fat concentration ranged from 35.9 g to 47 g per day. The n-3 PUFA content was consistent with the recommendations of a healthy individual, but it did not meet the needs of patients in a psycho-neurological hospital. The total eicosapentaenoic acid and docosahexaenoic acid concentration in the hospital menus ranged from 0.03 to 0.13 g, which was significantly lower than recommended, whereas LA and ALA concentration in hospital menus is close to optimal. The trans-fatty acids concentration in hospital menus did not exceed 2.5 g per day, with the exception of one day in hospital No. 2. The impact of diet on the treatment of psycho-neurological diseases in Latvian psycho-neurological hospitals has not been sufficiently assessed.

There is a strong correlation between diet and mental health, and malnutrition can contribute to the development of various psycho-neurological diseases. Fatty acid profile plays an important role in the treatment of psycho-neurological diseases; therefore, the aim of the current study was to evaluate fatty acid profile in the diet of patients in three Latvian psycho-neurological hospitals. Latvian psycho-neurological hospitals submitted a detailed one-week menu. The information in the menus was processed using the Fineli program. Each menu identified the composition of fatty acids. The average fat concentration in different hospital menus ranged from 74.8 g to 96.1 g per day, where the concentration of saturated fatty acids ranged from 37.5 g to 47.7 g per day and the unsaturated fat concentration ranged from 35.9 g to 47 g per day. The n-3 PUFA content was consistent with the recommendations of a healthy individual, but it did not meet the needs of patients in a psycho-neurological hospital. The total eicosapentaenoic acid and docosahexaenoic acid concentration in the hospital menus ranged from 0.03 to 0.13 g, which was significantly lower than recommended, whereas LA and ALA concentration in hospital menus is close to optimal. The trans-fatty acids concentration in hospital menus did not exceed 2.5 g per day, with the exception of one day in hospital No. 2. The impact of diet on the treatment of psycho-neurological diseases in Latvian psycho-neurological hospitals has not been sufficiently assessed.

The experiment was conducted to analyse the effect of fermented acid whey permeate on milk yield and composition in the lactating cows. Propionic acid bacteria and their metabolites have been used in the lactating cows feeding over decades, primarily to improve growth performance, feed conversation and milk production efficiency. Two groups of the lactating cows were arranged in the study: control group (n=50) and experimental group (n=50). Experimental group’s animals received 0.5 L of fermented whey permeate daily. Acid whey permeate was inoculated with the freeze-dried PS-4 (Propionibacterium freudenreichii subsp. shermanii, Chr.Hansen, Denmark) starter and fermented anaerobically for 48 hours at 20±2 ºC. Fat, protein, lactose and total solids concentration in acid whey permeate and fermented acid whey permeate was analysed by the standard methods, but propionic acid was detected by HPLC. Milk composition and quality indices were determined at the beginning of the study and each month during 6 months period. At the end of the study the feeding of fermented acid whey permeate was stopped, but milk composition and quality data were monitored additionally after one month. Milk fat, protein, lactose, total solids, urea concentration and somatic cell count were analysed by a near infrared spectroscopy. The variability in milk composition and quality data across trial was greater in the experiment group than in the control. Milk fat and somatic cell count were significantly different (p is less than 0.05) than other studied parameters in the experimental group cows’ milk. Milk yield and lactose concentration were tended to increase during feeding of fermented acid whey permeate in the lactating cows without significant differences between control and experimental groups. Fermented acid whey permeate as feed supplement improves energy metabolism for dairy cows which results in the higher milk yield and fat concentration.

The experiment was conducted to analyse the effect of fermented acid whey permeate on milk yield and composition in the lactating cows. Propionic acid bacteria and their metabolites have been used in the lactating cows feeding over decades, primarily to improve growth performance, feed conversation and milk production efficiency. Two groups of the lactating cows were arranged in the study: control group (n=50) and experimental group (n=50). Experimental group’s animals received 0.5 L of fermented whey permeate daily. Acid whey permeate was inoculated with the freeze-dried PS-4 (Propionibacterium freudenreichii subsp. shermanii, Chr.Hansen, Denmark) starter and fermented anaerobically for 48 hours at 20±2 ᵒC. Fat, protein, lactose and total solids concentration in acid whey permeate and fermented acid whey permeate was analysed by the standard methods, but propionic acid was detected by HPLC. Milk composition and quality indices were determined at the beginning of the study and each month during 6 months period. At the end of the study the feeding of fermented acid whey permeate was stopped, but milk composition and quality data were monitored additionally after one month. Milk fat, protein, lactose, total solids, urea concentration and somatic cell count were analysed by a near infrared spectroscopy. The variability in milk composition and quality data across trial was greater in the experiment group than in the control. Milk fat and somatic cell count were significantly different (p<0.05) than other studied parameters in the experimental group cows’ milk. Milk yield and lactose concentration were tended to increase during feeding of fermented acid whey permeate in the lactating cows without significant differences between control and experimental groups. Fermented acid whey permeate as feed supplement improves energy metabolism for dairy cows which results in the higher milk yield and fat concentration.

An urgent problem is drying and processing of the wet dispersed waste, obtained in the production of food products, which can then be efficiently used as a fertiliser, for feeding livestock or as biofuel. A new design of a vibrating fluidised bed dryer has been developed, which, with low energy consumption, provides a pre-set productivity and the required final moisture content. The process of vertical oscillations of the body of a vibration dryer, together with the food waste contained in it, is analysed analytically, the necessary equivalent scheme is built, on the basis of which differential equations of the vertical oscillations of the body are compiled, their analytical solutions are obtained, and a numerical calculation is performed on a PC using the developed program.

An urgent problem is drying and processing of the wet dispersed waste, obtained in the production of food products, which can then be efficiently used as a fertiliser, for feeding livestock or as biofuel. A new design of a vibrating fluidised bed dryer has been developed, which, with low energy consumption, provides a pre-set productivity and the required final moisture content. The process of vertical oscillations of the body of a vibration dryer, together with the food waste contained in it, is analysed analytically, the necessary equivalent scheme is built, on the basis of which differential equations of the vertical oscillations of the body are compiled, their analytical solutions are obtained, and a numerical calculation is performed on a PC using the developed program. Rational parameters of the vibration dryer, providing vibroboiling of the mass of the food waste, have been determined: the body mass m = 250 ... 510 kg; the debalance mass md = 10… 15 kg; the number of revolutions of the debalance electric motor nd = 1950 ... 2650 rpm ∙ min ∙¹; maximum stiffness of the support springs Cₚ = 8∙10⁵ N∙m–¹; the diameter of the centre of mass of the debalances dd = 0.01 m. In addition, as a result of the thermophysical theoretical and experimental studies of the vibration drying process, the following optimal design and technological parameters of the vibration dryer were obtained: the heat transfer area Sₜ.ₚ.ₙ= 4.15 m²; the radius of the heating pipe rₜ= 0.1 m; the length of the heating pipe lₜ = 3 m; the number of heating pipes nₜ= 50; the heat transfer coefficient Kₚ= 2500; the final temperature of the dried waste tₒ₂ = 100 ºС.

The Internet of Things (IoT) is a computing concept that describes the idea of everyday physical objects being connected to the Internet and being able to identify themselves to other devices, and day by day it becomes popular in everyday life as well as in entrepreneurship. The IoT covers broad areas, including manufacturing, the health sector, agriculture, smart cities, security and emergencies among many others. The market for the industrial IoT is estimated to surpass 107 billion euros by 2021 and reach a compound annual growth rate of 7.3% as of 2020. The IoT makes an impact on all industries and provides benefits for various areas of business; however, business may be faced with some risks as well. The research aim is to analyse the benefits and risks of the IoT in entrepreneurship. The descriptive method, analysis and synthesis, the induction and deduction methods were used to achieve the aim. The research has revealed that the IoT can provide several opportunities for business in all fields of operations – marketing, logistics, accounting and human resource management. However, businesses may be faced with some challenges related to privacy and security, processing, analysis and management of data, as well as monitoring and sensing.

The Internet of Things (IoT) is a computing concept that describes the idea of everyday physical objects being connected to the Internet and being able to identify themselves to other devices, and day by day it becomes popular in everyday life as well as in entrepreneurship. The IoT covers broad areas, including manufacturing, the health sector, agriculture, smart cities, security and emergencies among many others. The market for the industrial IoT is estimated to surpass 107 billion euros by 2021 and reach a compound annual growth rate of 7.3% as of 2020. The IoT makes an impact on all industries and provides benefits for various areas of business; however, business may be faced with some risks as well. The research aim is to analyse the benefits and risks of the IoT in entrepreneurship. The descriptive method, analysis and synthesis, the induction and deduction methods were used to achieve the aim. The research has revealed that the IoT can provide several opportunities for business in all fields of operations – marketing, logistics, accounting and human resource management. However, businesses may be faced with some challenges related to privacy and security, processing, analysis and management of data, as well as monitoring and sensing.

In sub-Saharan Africa intensifying small-scale farming is essential in addressing poverty related issues in rural communities and the degradation of natural resources. Integrated Soil Fertility Management (ISFM) are the best practices used to improve the productivity of crops whilst maximizing agronomic efficiency of inputs applied and hence contributing to sustainable intensification. ISFM usually include the appropriate use of inorganic fertilizer and organic resources, good agronomic practices and appropriate use of germplasm. The survey was carried-out on the awareness of Integrated Soil Fertility Management practices in the Savelugu Municipal of Northern Ghana to study the awareness of integrated soil fertility management practices amongst farmers through the administration of questionnaires. A multistage method of sampling was used in selecting thirty (30) respondents randomly from five (5) selected communities namely Jana, Yapalsi, Diari, Nabogu and Gushie to make up a total sample size of 150 respondents. Frequency distribution and percentages were used to represent the data. Correlation analysis was used to test for the relationship between awareness, educational level and household size. The survey showed that majority of the respondents at ages between 21 and 30 years were married and majority with household size of 3 to 5 as well as primary and secondary education. Farming activities were carried-out by hand (80%). Majority of the respondents (43.3%) were informed about ISFM through demonstrations and 20% of the farmers apply inorganic fertilizer. About 85.5% of the respondents were aware of ISFM. The research also revealed that ISFM improves production and supports finances of respondents. The assessment of respondents’ perception of ISFM revealed a positive agreement of the effect of ISFM on soil health as well as improved production. In conclusion, it is thus suggested that it is needful for the involvement of the government on the adoption of ISFM via Non-Governmental Organisations (NGOs) locally and or internationally for a suitable advancement and to guarantee a sustainable environment with a world-wide corporation for improvement.

In sub-Saharan Africa intensifying small-scale farming is essential in addressing poverty related issues in rural communities and the degradation of natural resources. Integrated Soil Fertility Management (ISFM) are the best practices used to improve the productivity of crops whilst maximizing agronomic efficiency of inputs applied and hence contributing to sustainable intensification. ISFM usually include the appropriate use of inorganic fertilizer and organic resources, good agronomic practices and appropriate use of germplasm. The survey was carried-out on the awareness of Integrated Soil Fertility Management practices in the Savelugu Municipal of Northern Ghana to study the awareness of integrated soil fertility management practices amongst farmers through the administration of questionnaires. A multistage method of sampling was used in selecting thirty (30) respondents randomly from five (5) selected communities namely Jana, Yapalsi, Diari, Nabogu and Gushie to make up a total sample size of 150 respondents. Frequency distribution and percentages were used to represent the data. Correlation analysis was used to test for the relationship between awareness, educational level and household size. The survey showed that majority of the respondents at ages between 21 and 30 years were married and majority with household size of 3 to 5 as well as primary and secondary education. Farming activities were carried-out by hand (80%). Majority of the respondents (43.3%) were informed about ISFM through demonstrations and 20% of the farmers apply inorganic fertilizer. About 85.5% of the respondents were aware of ISFM. The research also revealed that ISFM improves production and supports finances of respondents. The assessment of respondents’ perception of ISFM revealed a positive agreement of the effect of ISFM on soil health as well as improved production. In conclusion, it is thus suggested that it is needful for the involvement of the government on the adoption of ISFM via Non-Governmental Organisations (NGOs) locally and or internationally for a suitable advancement and to guarantee a sustainable environment with a world-wide corporation for improvement.

One of the mechanisms for enhancing innovative processes in the industry is the application of the concept of the “four-link spiral”. In contrast to the 3-link spiral, this model as one of the most important components includes a “society”, acting as one of the actors of innovative transformations. Firstly, it is society that is the main consumer of innovative products being created and, thereby, establishes “requirements”, forming demands for the quality and parameters of future products; secondly, society, in turn, acts as the initiator and generator of innovations, forming the so-called “social capital” necessary for the implementation of directly innovative transformations. In this scientific work, the problems of the formation of a “smart specialization” strategy for the innovative development of the industrial sector of the national economic system based on the application of the four-link spiral concept are investigated. A system of quantitative indicators for assessing the innovative level of industrial development is presented. The experience of introducing the concept of a four-link spiral as a mechanism of innovative development of industry (on the example of the Republic of Belarus and the Russian Federation) is given. The aim of the article is to describe innovation processes in the Russian Federation and the Republic of Belarus and to develop an innovation transfer model.

One of the mechanisms for enhancing innovative processes in the industry is the application of the concept of the “four-link spiral”. In contrast to the 3-link spiral, this model as one of the most important components includes a “society”, acting as one of the actors of innovative transformations. Firstly, it is society that is the main consumer of innovative products being created and, thereby, establishes “requirements”, forming demands for the quality and parameters of future products; secondly, society, in turn, acts as the initiator and generator of innovations, forming the so-called “social capital” necessary for the implementation of directly innovative transformations. In this scientific work, the problems of the formation of a “smart specialization” strategy for the innovative development of the industrial sector of the national economic system based on the application of the four-link spiral concept are investigated. A system of quantitative indicators for assessing the innovative level of industrial development is presented. The experience of introducing the concept of a four-link spiral as a mechanism of innovative development of industry (on the example of the Republic of Belarus and the Russian Federation) is given. The aim of the article is to describe innovation processes in the Russian Federation and the Republic of Belarus and to develop an innovation transfer model.