Purpose. To elaborate winter wheat cultivation technologies based on balanced fertilizer system that combines application of mineral fertilizers and the increase of their efficiency by the use of preparations with microelements. Methods. Field and laboratory studies, mathematical and statistical analysis. Results. During 2011–2013, the effect of cultivation technologies on the formation of yield and quality of winter wheat varie­ty ‘Benefis’ (pea is a predecessor) was studied. In case of alternative technologies that provided adding only by-products of the predecessor, the yield of winter wheat was 3.73 t/ha when using integrated protection system, and it was increased to 4.22 t/ha with grain quality of the 4th–5th class of the group B when foliar dressing was applied. Resource saving technologies of cultivation with restricted use of fertilizers (Р45К45N30(II)+30(IV)) provided productivity at the level of 5.19–5.61 t/ha with grain quality of the 2nd–3rd class of the group A. Grain yield of 6.27 t/ha of the 2nd class quality was obtained by the use of intensive cultivation technology, which included application of mineral fertilizers (Р90К90N30(II)+60(IV)+30(VIII)) in addition to the use of predecessor’s by-products and foliar dressing. The highest yield of grain (6.71 t/ha) on average during all years of the study with the 1st class of the group A quality was provided by energy-intensive technology, which included application of P135K135N60(II)+75(IV)+45(VIII) with embedding of predecessor’s by-products into the soil and foliar dressing. Conclusions. It was established that in the northern part of the Forest-Steppe zone of Ukraine the highest productivity of winter wheat was obtained in dark gray podzolic soils using the energy-intensive technology with application of P135K135N60(II)+75(IV)+45(VIII) against the background of predecessor’s by-products embedded into the soil in case of integrated plant protection, and foliar dres­sing. This technology ensured the yield of 6.71 t/ha with grain quality of the 1st class of the group A.

Purpose. To elaborate winter wheat cultivation technologies based on balanced fertilizer system that combines application of mineral fertilizers and the increase of their efficiency by the use of preparations with microelements. Methods. Field and laboratory studies, mathematical and statistical analysis. Results. During 2011–2013, the effect of cultivation technologies on the formation of yield and quality of winter wheat varie­ty ‘Benefis’ (pea is a predecessor) was studied. In case of alternative technologies that provided adding only by-products of the predecessor, the yield of winter wheat was 3.73 t/ha when using integrated protection system, and it was increased to 4.22 t/ha with grain quality of the 4th–5th class of the group B when foliar dressing was applied. Resource saving technologies of cultivation with restricted use of fertilizers (Р45К45N30(II)+30(IV)) provided productivity at the level of 5.19–5.61 t/ha with grain quality of the 2nd–3rd class of the group A. Grain yield of 6.27 t/ha of the 2nd class quality was obtained by the use of intensive cultivation technology, which included application of mineral fertilizers (Р90К90N30(II)+60(IV)+30(VIII)) in addition to the use of predecessor’s by-products and foliar dressing. The highest yield of grain (6.71 t/ha) on average during all years of the study with the 1st class of the group A quality was provided by energy-intensive technology, which included application of P135K135N60(II)+75(IV)+45(VIII) with embedding of predecessor’s by-products into the soil and foliar dressing. Conclusions. It was established that in the northern part of the Forest-Steppe zone of Ukraine the highest productivity of winter wheat was obtained in dark gray podzolic soils using the energy-intensive technology with application of P135K135N60(II)+75(IV)+45(VIII) against the background of predecessor’s by-products embedded into the soil in case of integrated plant protection, and foliar dres­sing. This technology ensured the yield of 6.71 t/ha with grain quality of the 1st class of the group A.

Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors. Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one.

Мета. Проаналізувати рівень перехресної стійкості отриманих соле- та осмостійких клітинних ліній і рослин-регенерантів тритикале озимого до осмотичного та сольового стресів.Методи. Культури тканин і органів in vitro, селекції in vitro, біохімічні, статистичний аналіз.Результати. Встановлено, що стабільність прояву ознаки перехресної стійкості як до сольового, так і до осмотичного стресів у отриманих клітинних ліній тритикале озимого була на досить високому рівні – до кінця шостого пасажу виживало від 50 до 76% калюсів. Показано, що, незважаючи на наявність у селективному середовищі сублетальної концентрації стрес-фактора (маніту/хлориду натрію), стійкі клітинні лінії тритикале активно продовжували рости й накопичувати біомасу. Виявлено, що у лінії ‘38/1296’ найбільш стійкими до осмотичного та сольового стресів були клітинні лінії 5Л/сл та 5Л/ос відповідно, а в сорту ‘Обрій’ – 1С/сл та 1С/ос відповідно, оскільки вони мали найвищу частку живих калюсів та приріст біомаси за селективних умов, а рослини-регенеранти з них – найвищий рівень виживання після дії комплексу абіотичних стресорів. Солестійкі клітинні лінії обох генотипів тритикале озимого порівняно з контролем характеризувались також достовірно вищим вмістом вільного проліну за дії селективних чинників. Одержані результати можуть свідчити про те, що клітинні лінії та рослини-регенеранти тритикале мають генетично обумовлену ознаку стійкості до стресових факторів.Висновки. Перевірка ознак стійкості до абіотичних стресорів засвідчила досить високий рівень перехресної толерантності отриманих клітинних ліній обох генотипів тритикале як до сольового, так і до осмотичного стресів. Стійкість до сольового та осмотичного стресів виділених in vitro клітин збереглась у індукованих рослинах і на організмовому рівні забезпечила підвищення толерантності до абіотичних факторів середовища. Показано, що завдяки загальним неспецифічним механізмам стійкості резистентність калюсних культур тритикале до одного абіотичного стресора може призводити до підвищення толерантності й до іншого. | Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors.Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one. | Цель. Проанализировать уровень перекрестной устойчивости полученных соле- и осмоустойчивых клеточных линий и растений-регенерантов тритикале озимого к осмотическому и солевому стрессам. Методы. Культуры тканей и органов in vitro, селекции in vitro, биохимические, статистический анализ. Результаты. Установлено, что стабильность проявления признака перекрестной устойчивости как к солевому, так и осмотическому стрессам у полученных клеточных линий тритикале озимого была на достаточно высоком уровне – к концу шестого пассажа выживало от 50 до 76% каллусов. Показано, что, несмотря на наличие в селективной среде сублетальной концентрации стресс-фактора (маннита/хлорида натрия), устойчивые клеточные линии тритикале активно продолжали свой рост и накапливали биомассу. Выявлено, что в линии ‘38/1296’ наиболее устойчивыми к осмотическому и солевому стрессам были клеточные линии 5Л/сл и 5Л/ос соответственно, а у сорта ‘Обрий’ – 1С/сл и 1С/ос соответственно, поскольку они имели самую высокую долю живых каллусов и прирост биомассы в селективных условиях, а растения-регенеранты из них – наивысший уровень выживания после воздействия комплекса абиотических стрессоров. Солеустойчивые клеточные линии обоих генотипов тритикале озимого по сравнению с контролем характеризовались также достоверно более высоким содержанием свободного пролина при действии селективных факторов. Полученные результаты могут свидетельствовать о том, что клеточные линии и растения-регенеранты тритикале имеют генетически обусловленный признак устойчивости к стрессовым факторам. Выводы. Проверка признаков устойчивости к абиотическим стрессорам показала достаточно высокий уровень перекрестной толерантности полученных клеточных линий обоих генотипов тритикале как к солевому, так и к осмотическому стрессам. Устойчивость к солевому и осмотическому стрессам выделенных in vitro клеток сохранилась в индуцированных растениях и на уровне организма обеспечила повышение толерантности к абиотическим факторам среды. Показано, что благодаря общим неспецифическим механизмам устойчивости резистентность каллусных культур тритикале к одному абиотическому стрессору может приводить к повышению толерантности и к другому.

Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors. Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one.

Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD. Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Мета.Визначити статистичні методи та інструментальні засоби (пакети прикладних програм) для створення сис­теми підтримки прийняття рішення (СППР) кваліфікаційної експертизи сортів рослин на придатність до поширення (ПСП) у розрізі завдань оброблення даних. Обґрунтувати вибір програмних засобів оброблення статистичних даних польових та лабораторних досліджень, що входять до складу кваліфікаційної експертизи на ПСП. Методи. Аналітичний, який ґрунтується на порівнянні методів описової та багатовимірної статистики й засобів інтелектуального аналізу даних, отриманих під час кваліфікаційної експертизи на ПСП. Порівняльний аналіз програмних засобів оброблення статистичних даних для підготовки пропозицій щодо кінцевого рішення за заявкою на сорт рослин.Результати. Проведено декомпозицію завдань, що входять до складу системи підтримки прийняття рішень з кваліфікаційної екс­пертизи сортів-кандидатів на ПСП. Проведено порівняння статистичного пакета SPSS, пакета аналізу, що входить до складу MS Excel, та мови програмування R за критеріями: зручність інтерфейсу, функціональність, якість представлення результатів обчислення, наочність графічної інформації, вартість програмного засобу. Обидва пакети широко застосовують у світі для статистичного оброблення даних, вони мають аналогічний склад функцій для обчислення статистик. Висновки. Виокремлено завдання ПСП, що рекомендовано вирішувати із застосуванням досліджуваних засобів. Як інструментальний засіб рекомендовано використовувати мову програмування R. Основною перевагою R порівняно з пакетом IBM SPSS Statistics є те, що R є програмним продуктом з відкритим кодом, який вільно поширюється. | Цель. Определить статистические методы и инструментальные средства (пакеты прикладных программ) для создания системы поддержки принятия решения (СППР) квалификационной экспертизы сортов на пригодность их к распространению (ПСР) в разрезе задач обработки данных. Обосновать выбор программных средств обработки статистических данных полевых и лабораторных исследований, которые входят в состав квалификационной экспертизы на ПСР. Методы. Аналитический, основанный на сравнении методов описательной и многомерной статистики и средств интеллектуального анализа данных, полученных при проведении квалификационной экспертизы на ПСР. Сравнительный анализ программных средств обработки статистических данных для подготовки предложений по окончательному решению по заявке на сорт растений.Результаты. Проведена декомпозиция задач, которые входят в состав системы поддержки принятия решений по квалификационной экспертизе сортов-кандидатов на ПСП. Проведено сравнение статистического пакета SPSS, пакета анализа, который входит в состав MS Excel и языка программирования R по критериям: удобство интерфейса, функциональность, качество представления результатов расчетов, наглядность графической информации, стоимость программного средства. Оба пакета широко применяются в мире для статистической обработки данных, имеют аналогичный состав функций для расчета статистик. Выводы. Выделены задачи ПСР, которые рекомендуется решать с применением исследуемых средств. В качестве инструментального средства целесообратно использовать язык программирования R. Основным преимуществом R по сравнению с пакетом IBM SPSS Statistics является то, что R – программный продукт с открытым кодом, который свободно распространяется. | Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD.Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD. Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Purpose. To obtain Miscanthus sacchariflorus (Maxim.) Hack and Miscanthus sinensis Andersson in vitro culture by indirect morphogenesis. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Composition of nutrient medium was developed intended for induction of callusogenesis from Miscanthus seeds with a poor germination and viability of seedlings – Murashige and Skoog (MS) medium was modified for the amount of macroelements (half-dose) that was supplemented with amino acids (300 mg/l of glutamic acid, 50 mg/l of aspartic acid, 5 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline) and plant growth regulators [2,5 mg/l of 2.4D (2.4-Dichlorophenoxyacetic acid), 0,6 mg/l of BAP (6-Benzyl-aminopurine) and 0,3 mg/l of ABA (Abscisic acid)]. Composition of nutrient medium was developed for regeneration of microplants from callus – agar MS medium was modified for the amount of macroelements (half-dose) supplemented with vitamins: 10 mg/l of thiaminum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid (by White), 1,0 mg/l of ascorbic acid, 250 mg/l of glutamic acid, 2,0 mg/l of BAP, 0,3 mg/l of NAA (Naphthaleneacetic acid). On this medium, 100% regeneration of M. sacchariflorus (Maxim.) Hack and 50% regeneration of M. sinensis Andersson was obtained. Due to media modification aimed at initiating callusogenesis and microplants regeneration, reproduction factor of M. sinensis was increased 20 times at the average, M. sacchariflorus – 35–40 times. Conclusions. Plants of M. sacchariflorus (Maxim.) Hack and M. sinensis Andersson were obtained in vitro culture by initiation of callusogenes and microplants regeneration from the Miscanthus seeds with poor germination and viability on nutrient media of certain composition.

Purpose. To obtain Miscanthus sacchariflorus (Maxim.) Hack and Miscanthus sinensis Andersson in vitro culture by indirect morphogenesis. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Composition of nutrient medium was developed intended for induction of callusogenesis from Miscanthus seeds with a poor germination and viability of seedlings – Murashige and Skoog (MS) medium was modified for the amount of macroelements (half-dose) that was supplemented with amino acids (300 mg/l of glutamic acid, 50 mg/l of aspartic acid, 5 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline) and plant growth regulators [2,5 mg/l of 2.4D (2.4-Dichlorophenoxyacetic acid), 0,6 mg/l of BAP (6-Benzyl-aminopurine) and 0,3 mg/l of ABA (Abscisic acid)]. Composition of nutrient medium was developed for regeneration of microplants from callus – agar MS medium was modified for the amount of macroelements (half-dose) supplemented with vitamins: 10 mg/l of thiaminum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid (by White), 1,0 mg/l of ascorbic acid, 250 mg/l of glutamic acid, 2,0 mg/l of BAP, 0,3 mg/l of NAA (Naphthaleneacetic acid). On this medium, 100% regeneration of M. sacchariflorus (Maxim.) Hack and 50% regeneration of M. sinensis Andersson was obtained. Due to media modification aimed at initiating callusogenesis and microplants regeneration, reproduction factor of M. sinensis was increased 20 times at the average, M. sacchariflorus – 35–40 times. Conclusions. Plants of M. sacchariflorus (Maxim.) Hack and M. sinensis Andersson were obtained in vitro culture by initiation of callusogenes and microplants regeneration from the Miscanthus seeds with poor germination and viability on nutrient media of certain composition.

Purpose. To select the initial breeding material with complex resistance to Fusarium dry rot and tuber late blight among the created potato of secondary interspecific hyb­rids. Methods. Interspecific hybridization, laboratory test, analytical approach. Results. Based on the interspecific hybridization, the initial breeding material was created and the degree of its resistance to the above pathogens was determined by way of artificial infection of tubers with the inoculum of such fungi as Fusarium sambucinum Fuck and Phytophthora infestans (Mont.) De Bary. During interspecific hybridization based on schemes of saturating and enriching crosses, using forms of various species with a high phenotypic expression of resistance to Fusarium dry rot, the result of the cumulative effect of genes that control resistance to the pathogen was observed. Crossing combinations differed significantly for the degree of population average manifestation of resistance to the diseases. Conclusions. Combinations В54, В53, В61 with a mean resistance (above 7 grades) to Fusarium dry rot have been selected. Such combinations as B52, B50 and B54 had increased resistance to tuber late blight. It was found that the combination В54 is characterized by complex resistance to both diseases. For further work, the following samples with complex resistance to Fusarium dry rot and tuber late blight (7 grades or more) were selected: В59с42, В59с43, В50с16, В50с19, В50с44, В51с1, В51с26, В51с28, В52с11, В52с23, В52с24, В52с29, В53с1, В53с11, В53с17 , В53с23, В54с13, В54с14.

Purpose. To select the initial breeding material with complex resistance to Fusarium dry rot and tuber late blight among the created potato of secondary interspecific hyb­rids. Methods. Interspecific hybridization, laboratory test, analytical approach. Results. Based on the interspecific hybridization, the initial breeding material was created and the degree of its resistance to the above pathogens was determined by way of artificial infection of tubers with the inoculum of such fungi as Fusarium sambucinum Fuck and Phytophthora infestans (Mont.) De Bary. During interspecific hybridization based on schemes of saturating and enriching crosses, using forms of various species with a high phenotypic expression of resistance to Fusarium dry rot, the result of the cumulative effect of genes that control resistance to the pathogen was observed. Crossing combinations differed significantly for the degree of population average manifestation of resistance to the diseases. Conclusions. Combinations В54, В53, В61 with a mean resistance (above 7 grades) to Fusarium dry rot have been selected. Such combinations as B52, B50 and B54 had increased resistance to tuber late blight. It was found that the combination В54 is characterized by complex resistance to both diseases. For further work, the following samples with complex resistance to Fusarium dry rot and tuber late blight (7 grades or more) were selected: В59с42, В59с43, В50с16, В50с19, В50с44, В51с1, В51с26, В51с28, В52с11, В52с23, В52с24, В52с29, В53с1, В53с11, В53с17 , В53с23, В54с13, В54с14.

Purpose. To summarize results of studying consumptive qualities of different varieties of potato and define basic characteristics which allow to subsume them under specific economic categories. Methods. Field study, laboratory test, summarizing, analytical approach. Results. Potato varieties entered in the State register of plant varieties suitable to dissemination in Ukraine and new ones especially to be bred at the Institute of Potato Growing of NAAS were studied during the period of 2005–2016 for such basic economic characters as consumptive quality of tubers, content of starch, dry matters, protein, sugar, vitamins, carotenoids and mineral substances as well as aminoacids, color of flesh, suitability for industrial manufacturing of potato products and for purpose of technology. Attention was paid to the good prospects to use varie­ties with purple, blue and red potato tuber flesh with high antioxidant capacity. Potato varieties with above cha­racteristics and their complex combination were defined and described. The requirements of processing industry for potato as a raw material for manufacturing of potato food were given. Conclusions. The major criterion for consumptive qualities of a potato variety and correspondingly division for the commercial use is consumptive quality of tubers, especially content of essential nutrients and their favorable combination, improved taste and cooking quality, high antioxidant capacity, suitability for potato products manufacturing and use for purpose of technology. Potato varieties can be divided for economic purposes into edible, suitable for potato products manufacturing, technical and multipurpose ones.

Purpose. To summarize results of studying consumptive qualities of different varieties of potato and define basic characteristics which allow to subsume them under specific economic categories. Methods. Field study, laboratory test, summarizing, analytical approach. Results. Potato varieties entered in the State register of plant varieties suitable to dissemination in Ukraine and new ones especially to be bred at the Institute of Potato Growing of NAAS were studied during the period of 2005–2016 for such basic economic characters as consumptive quality of tubers, content of starch, dry matters, protein, sugar, vitamins, carotenoids and mineral substances as well as aminoacids, color of flesh, suitability for industrial manufacturing of potato products and for purpose of technology. Attention was paid to the good prospects to use varie­ties with purple, blue and red potato tuber flesh with high antioxidant capacity. Potato varieties with above cha­racteristics and their complex combination were defined and described. The requirements of processing industry for potato as a raw material for manufacturing of potato food were given. Conclusions. The major criterion for consumptive qualities of a potato variety and correspondingly division for the commercial use is consumptive quality of tubers, especially content of essential nutrients and their favorable combination, improved taste and cooking quality, high antioxidant capacity, suitability for potato products manufacturing and use for purpose of technology. Potato varieties can be divided for economic purposes into edible, suitable for potato products manufacturing, technical and multipurpose ones.

Purpose. To establish correlation dependence of influence of such factors as seeding rate, sowing time and seeding methods on yield indicators, as well as individual response of winter wheat varieties to them in case of the ecological system of seed production, that would allow to form elements of intensive varietal technology and obtain the genetically determined productivity potential of the variety in the future. Methods. Weight measuring was used to determine seed yield; the reliability of the experiment results was identified by statistical evaluation, analysis of variance and regression procedure. Results. During the period of investigation, the weather conditions differed significantly both for the temperature regime and the amount of precipitation, but the stability of grain and seed yield over years was the main requirement to varieties, that allowed to study the intergenotypic correlation relationships of crop yield indices and the dynamics of their changes under the effect of ecological factors. In the course of investigation, winter wheat yield indices were fixed annually from 684 plots, which were grouped and analyzed for factors of influence in order to ensure the complete certainty. Conclusions. Variants of investigation were defined for the certified seed yield and environmental factors (sowing time and seeding method, seeding rate), that had strong positive correlation relationships. Seeding rate and seeding method had the greatest impact on 1000 kernel weight. For tille­ring coefficient, varieties depending on the variant of the investigation had a negative close correlation relationship, which was greatly affected by seeding rate. For correlation relationships, winter wheat varieties ‘Bohdana’ and ‘Slavna’ appeared to be the most stable, ‘Chorniava’ and ‘Astarta’ were the most plastic.

Purpose. To establish correlation dependence of influence of such factors as seeding rate, sowing time and seeding methods on yield indicators, as well as individual response of winter wheat varieties to them in case of the ecological system of seed production, that would allow to form elements of intensive varietal technology and obtain the genetically determined productivity potential of the variety in the future. Methods. Weight measuring was used to determine seed yield; the reliability of the experiment results was identified by statistical evaluation, analysis of variance and regression procedure. Results. During the period of investigation, the weather conditions differed significantly both for the temperature regime and the amount of precipitation, but the stability of grain and seed yield over years was the main requirement to varieties, that allowed to study the intergenotypic correlation relationships of crop yield indices and the dynamics of their changes under the effect of ecological factors. In the course of investigation, winter wheat yield indices were fixed annually from 684 plots, which were grouped and analyzed for factors of influence in order to ensure the complete certainty. Conclusions. Variants of investigation were defined for the certified seed yield and environmental factors (sowing time and seeding method, seeding rate), that had strong positive correlation relationships. Seeding rate and seeding method had the greatest impact on 1000 kernel weight. For tille­ring coefficient, varieties depending on the variant of the investigation had a negative close correlation relationship, which was greatly affected by seeding rate. For correlation relationships, winter wheat varieties ‘Bohdana’ and ‘Slavna’ appeared to be the most stable, ‘Chorniava’ and ‘Astarta’ were the most plastic.

Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.

Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.

Purpose. To analyse the qualitative and quantitative composition of volatile organic substances (VOS) in the petals of six species of dog-rose in the collection of M. M. Gryshko National Botanic Garden of the NAS of Ukraine for further bree­ding. Methods. Volatile organic substances were obtained by steam distillation. VOS was determined using gas chromato­graphy (Chromatograph Agilent Technologies 6890). Results. The qualitative and quantitative composition of volatile organic substances in the petals in such species as Rosa L. (R. roullettii HCh (Correvon), R. multiflora Thunb., R. pimpinellifolia L., R. canina L., R. centifolia L., R. rugosa Thunb.) was investigated. According to the results of the research, 105 VOS were discovered in the dog-rose petals, among which 11 were not identified. The dog-rose petals of identified VOC contained 16 components which share exceeds 5%, 31 – was ranging from 1% to 5%, 47 – was less than 1%. They belonged to different groups including monoterpenoids, sesquiterpenoids, sesquiterpene alcohols, saturated unbranched hydrocarbons etc. The largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45), while the number of identified components in species R. multiflora (33), R. rugosa (31) and R. canina (30) was relatively smaller. All studied dog-rose species were characterized by the presence of such saturated unbranched hydrocarbons as decan, tetradecane, pentadecane, hexadecane, heptadecane, octadecane, nanodecane, heneicosane, tricosane, tetracosane, pentacosane, heptocosane, hentriacontane. Triterpene hydrocarbon squalene is the important component of the VOS complex in dog-rose pen tals. b-phenylethyl alcohol to be one of the main components of the rose essential oils was found during investigation in the following four dog-rose species as R. centifolia (0.61%), R. pimpinellifolia (3.56%), R. rugosa (4.24%), and R. multiflora (5.43%). Significant content of dihydro-b-ionol (18.46%), dihydro-b-ionone (0.69%), thias­piran A (1.35%), and thiaspiran B (2.17%) were revealed in the petals of R. roulettii, which also have an influence on the aromatic bouquet of the rose oil. Conclusions. For the first time, 105 volatile organic substances were found in the petals of six species of dog-rose, 11 of which were not identified. It was found out that the largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45). The number of VOS identified in species R. multiflora (33), R. rugosa (31), and R. canina (30) was relatively smaller. Component composition of VOS in the petals of studied dog-rose species is an important constituent in breeding investigations of prospective producers for the various purposes of use.

Purpose. To analyse the qualitative and quantitative composition of volatile organic substances (VOS) in the petals of six species of dog-rose in the collection of M. M. Gryshko National Botanic Garden of the NAS of Ukraine for further bree­ding. Methods. Volatile organic substances were obtained by steam distillation. VOS was determined using gas chromato­graphy (Chromatograph Agilent Technologies 6890). Results. The qualitative and quantitative composition of volatile organic substances in the petals in such species as Rosa L. (R. roullettii HCh (Correvon), R. multiflora Thunb., R. pimpinellifolia L., R. canina L., R. centifolia L., R. rugosa Thunb.) was investigated. According to the results of the research, 105 VOS were discovered in the dog-rose petals, among which 11 were not identified. The dog-rose petals of identified VOC contained 16 components which share exceeds 5%, 31 – was ranging from 1% to 5%, 47 – was less than 1%. They belonged to different groups including monoterpenoids, sesquiterpenoids, sesquiterpene alcohols, saturated unbranched hydrocarbons etc. The largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45), while the number of identified components in species R. multiflora (33), R. rugosa (31) and R. canina (30) was relatively smaller. All studied dog-rose species were characterized by the presence of such saturated unbranched hydrocarbons as decan, tetradecane, pentadecane, hexadecane, heptadecane, octadecane, nanodecane, heneicosane, tricosane, tetracosane, pentacosane, heptocosane, hentriacontane. Triterpene hydrocarbon squalene is the important component of the VOS complex in dog-rose pen tals. b-phenylethyl alcohol to be one of the main components of the rose essential oils was found during investigation in the following four dog-rose species as R. centifolia (0.61%), R. pimpinellifolia (3.56%), R. rugosa (4.24%), and R. multiflora (5.43%). Significant content of dihydro-b-ionol (18.46%), dihydro-b-ionone (0.69%), thias­piran A (1.35%), and thiaspiran B (2.17%) were revealed in the petals of R. roulettii, which also have an influence on the aromatic bouquet of the rose oil. Conclusions. For the first time, 105 volatile organic substances were found in the petals of six species of dog-rose, 11 of which were not identified. It was found out that the largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45). The number of VOS identified in species R. multiflora (33), R. rugosa (31), and R. canina (30) was relatively smaller. Component composition of VOS in the petals of studied dog-rose species is an important constituent in breeding investigations of prospective producers for the various purposes of use.